According to ASTM or ISO Standards

• Peak force capture.
• 0.5% accuracy
• 500 Hz sampling rate

• 0.3% accuracy
• 1,000 Hz sampling rate

• Capacities up to 500 lbf
• 0.25% accuracy
• 7,000 Hz sampling rate

• USB output, compact size
• 0.3% accuracy
• 2,000 Hz sampling rate

• USB, RS-232, Mitutoyo, and analog outputs.
• 0.1% accuracy
• 7,000 Hz sampling rate

• 0.1% accuracy
• 10,000 Hz sampling rate

• Capacities: 50 to 10,000 lbF
• Available with 20 ft or 10 inch cable length (for test stands). Other custom lengths can be specified.

• 0.1% Accuracy
• Compatible with Mark-10 load cells (R01, R02, R03, R04, R05, R06), torque sensors (R50, R51, R52, R55)

• Capacities ranging from 5 lbF to 100 lbF
• 1% of FS Accuracy

• Includes Hand Dynamometer, Pinch Gauge and Goniomter

• USB, RS-232, Mitutoyo, and analog outputs
• 0.2% accuracy
• 3,000 Hz sampling rate

• Force capacity: 500 N (100 lbF)
• Jaw width (in): 1, 3, 5, 7
• Jaw type: Serrated
• Opening: 0-30 mm
• Weight: 0.14-0.41 kg (0.31-0.9 lbs)

• AWG30-AWG 3 [0.01-0.25 in]
• Settable speed
• 200 lbf Force Capacity

• Compatible with SLC load cells and STS torque sensors

• 0.2% Accuracy
• Compatible with Mark-10 load cells (R01, R02, R03, R04, R05, R06), torque sensors (R50, R51, R52, R55)

• Continuous data capture, break detection, COF, 2 peak capture
• 0.1% accuracy
• 14,000 Hz sampling rate

• 0.1% Accuracy
• Compatible with Mark-10 load cells (R01, R02, R03, R04, R05, R06), torque sensors (R50, R51, R52, R55)

• Compatible to ESM303 Test Stand

• Capacity: 100 lbF

• Coefficient of Friction testing guage, kinetic and static friction values will display on the gauge.
• 0.1% accuracy
• 7,000 Hz sampling rate

• LS1, 1 kN Capacity
• LS2.5, 2.5 kN Capacity, 55.1" Travel distance 
• LS5, 5 kN Capacity
• Extensometers are available with this series.
• Material test system, software has inputs for material dimensions used in calculations of results such as strain, modulus, yield...

• Capacity: 2,000 lbF [10 kN]
• Secures Textile webbing, tape, and braided materials. Conforms to ASTM D6775.

Capacity: 1000 lbF [5 kN]

• Compatible to Mark-10 test stands ESM303, ESM750, ESM1500

• CS2-225, 225 lbF capacity
• CS2-1100, 1100 lbF capacity
• Save and recall test setups
• 2 in 1 Laptop Console
• Tensile, compression, flexural, peel, or advanced multi-stage testing
• Export data and results