Mark-10 IntelliMESUR Test Frame-Series F: 100, 300, 500 lbF

IntelliMESUR
Mark-10 SKU: F105-IM

Choose a model: F105-IM 100 lbF Test frame with software (no touchscreen)
Price:
Sale price$8,882.50 USD Regular price$9,350.00 USD

The price indicated does not factor in the load cell, grips, or other optional accessories.

{formbuilder:56981}

Description

The IntelliMESUR® Series F Advanced Motorized Test Stand is designed for complex, multi-step applications as well as basic compression and tension testing.

Force capacities available of 100 lbf, 300 lbf, 500 lbf, 750 lbf and 1500 lbf. If capacities  of 750 lbf or 1500 lbf are needed go to this page: F755 and F1505 motorized test stands.

Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.

Features
  • Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.
  • Deflection compensation utility can be used to compensate for deflection within the grips and attachments. The deflection offset file can be associated with the test setup file.
  • Collects load and travel data at up to 1,000 Hz, and allows up to 4 million data points per run.
  • Save or export data automatically or manually. Save individual runs and results to a USB drive or file location of your choice. 
  • Manual control can be used tor running a quick test without having to create a test profile.
  • Control user access with three different permission levels.
Specifications

 

F105 F305 F505 F505H
Load capacity*: 100 lbF
[0.5 kN]
300 lbF
[1.5 kN]
500 lbF
[2.2 kN]
Maximum travel: 18.0 in
[457 mm]
Speed range: 0.02 – 45 in/min
[0.5 – 1,100 mm/min]
Load accuracy
(% of full scale)
Test frame: ±0.1%
Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%
Load sampling rate: 20,000 Hz
Data acquisition rate: 1,000 Hz
Speed accuracy: ±0.2% of setting, virtually no variation with load
Distance accuracy: ±0.002 in [0.05 mm], factory-compensated at up to full load
Distance resolution: 0.0005 in [0.01 mm]
Limit switch repeatability: ±0.001 in [0.03 mm]
Power: Universal input 100-240 VAC, 50/60 Hz, 300W
Fuse type: 1.2 A, 250V, 3AG, SLO BLO
Weight (test frame only): 60 lb
[27 kg]
70 lb
[32 kg]
Shipping weight: 75 lb
[34 kg]
85 lb
[39 kg]
Environmental conditions: Indoor use only
Up to 6,500 ft [2,000 m] above sea level
Temperature range: 40 – 95°F [5 – 35°C]
Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
Mains supply voltage fluctuations up to ±10 % of the nominal voltage
Transient overvoltages up to the levels of Overvoltage Category II
Use in environments up to Pollution Degree 2
Conformance: CE
Warranty: 3 years [see individual statement for further details]

 * Load capacity is reduced at higher speeds, as follows:
– F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
– F505 / F505H: limited to 300 lbF [1.5 kN] above 24 in [610 mm]/min

IntelliMESUR Software

Favorites

From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification.

Results View

The results view displays user-selected results for each run. Statistics may be applied to selected results.

Graph View

The Graph view plots force vs. distance or force vs. time. Overlay up to 10 runs for visual comparisons.

Multi-Step Tests

Create a custom sequence of motion control and data collection actions with multi-step testing.

Manual Control

Run a quick test or manually adjust crosshead for setting up a sample.

Included Items

The F105-IMT, F305-IMT, F505-IMT, and F505H-IMT advanced test frames are shipped as shown at left, and include the following accessories:

(1) Control panel, mounting bracket, and hardware
(1) Mounting bracket, column end (F505H only)
(1) USB cable
(1) #10-32M medium hook
(1) 5/16-18M large hook
(1) #10-32F 2” diameter compression plate
(1) #10-32 F/F coupler
(1) Adapter, 5/16-18M to #10-32F
(1) Set screw, #10-32 x 3/4”
(2) Hex nut, #10-32
(1) Power cord
(1) Allen wrench set

The F105-IM, F305-IM, F505-IM, and F505H-IM advanced test frames

The F105-IM, F305-IM, F505-IM, and F505H-IM advanced test frames are shipped as shown at left, and include the following accessories:

(1) Mounting bracket, column end (F505H only)
(1) USB flash drive containing software installation files
(1) USB dongle
(1) USB cable
(1) #10-32M medium hook
(1) 5/16-18M large hook
(1) #10-32F 2” diameter compression plate
(1) #10-32 F/F coupler
(1) Adapter, 5/16-18M to #10-32F
(1) Set screw, #10-32 x 3/4”
(2) Hex nut, #10-32
(1) Power cord
(1) Allen wrench set

This version does not include the touchscreen controller.

Optional Functions

The materials testing graph view displays Young's modulus, yield strength, offset yield strength, ultimate strength, and rupture.

Material Testing Calculations Module

(P/N: IMF002)

Characterize and analyze the behavior of materials, components, and assemblies with a suite of materials testing calculations, including:

  • Stress and strain
  • Tensile strength
  • Shear strength
  • Young’s modulus (auto-calculate or manually draw)
  • Yield point
  • Offset yield (user-specified percentage)
  • Rupture
  • Percent elongation
  • Flexural modulus
  • Force per unit width
  • Wide variety of results based on the above calculations, such as stress at maximum strain, strain at rupture, etc.

IntelliMESUR® formats calculations into a Results table, with corresponding statistics for multiple runs. View a stress-strain curve with annotated calculations. Display up to 10 runs simultaneously for visual comparison.

Coefficient of Friction (COF) Testing Module

Coefficient of Friction (COF) Testing Module

(P/N: IMF001)

Measure static and dynamic COF for a wide range of materials, per ASTM D1894 and other relevant standards. Specify the sled weight and configure data collection start and stop triggers. This module can be ordered upfront or enabled in the field via activation code.

Dimensions - in [mm]

Dimensions for F105, F305, F505 test stands
F505H Dimensions

Related Products

View all
CS Series
CS2-225 and CS2-1100 Motorized Test Stand, Motorized Test Stand, ChatillonCS2-225 and CS2-1100 Motorized Test Stand, Motorized Test Stand, Chatillon
Chatillon Chatillon CS2-225 and CS2-1100 Motorized Test Stand
SKU: CS2-225, CS2-1100
  • CS2-225, 225 lbF capacity
  • CS2-1100, 1100 lbF capacity
  • Save and recall test setups
  • Multistage and basic testing
  • Height and distance measurement
  • Deflection compensation
  • 2 in 1 Laptop Console
Sale priceFrom $14,019.05 USD Regular price$16,493.00 USD
IntelliMESUR
F105, F305, F505, F505H Advanced Motorized Test Stand, Motorized Test Stand, Mark-10F105, F305, F505, F505H Advanced Motorized Test Stand, Motorized Test Stand, Mark-10
Mark-10 Mark-10 IntelliMESUR Test Frame-Series F: 100, 300, 500 lbF
SKU: F105-IM, F305-IM, F505-IM, F505H-IM, F105-IMT, F305-IMT, ...
  • Available capacities of 100 lbF, 300 lbF, 500 lbF.
  • Save and recall test setups
  • Multistage and basic testing
  • Touchscreen or software
Sale priceFrom $8,882.50 USD Regular price$9,350.00 USD
IntelliMESUR
F755, F1505 Advanced Test Frames, Motorized Test Stand, Mark-10F755, F1505 Advanced Test Frames, Motorized Test Stand, Mark-10
Mark-10 Mark-10, Series F IntelliMESUR Test Frames, 750 & 1500 lbf
SKU: F755-IM, F755S-IM, F1505-IM, F1505S-IM, F755-IMT, F755S-I...
  • Available capacities of 750 lbF, 1500 lbF.
  • Save and recall test setups
  • Multistage and basic testing
  • Height measurement
  • Deflection compensation
  • Touchscreen or computer control
Sale priceFrom $12,635.00 USD Regular price$13,300.00 USD
LS Series
LS Series [LS1, LS5, LS2.5], Material Test Systems, Motorized Test Stand, Lloyd InstrumentsLloyd LS Series Material Test Systems (LS1, LS5, LS2.5)
Lloyd Instruments Lloyd LS Series Material Test Systems (LS1, LS5, LS2.5)
SKU: LS1SH-115V, LS1EH-115V, LS2.5EH-115V, LS5SH-115V
  • Available capacities of 1 kN, 2.5 kN, 5 kN
  • Extensometers are available with this series.
  • Material test system, software has inputs for material dimensions used in calculations of results such as strain, modulus, yield...
EasyMESUR
Mark-10 EasyMESUR Test Frames-Series F: 100, 300 or 500 lbFMark-10 EasyMESUR Test Frames-Series F: 100, 300 or 500 lbF
Mark-10 Mark-10 EasyMESUR Test Frames-Series F: 100, 300 or 500 lbF
SKU: F105-EM, F305-EM, F505-EM, F505H-EM
  • Available capacities of 100 lbF, 300 lbF, 500 lbF.
  • Travel: 18 in [457 mm]
  • A-la-carte platform, custom configuration as appropriate for the application and budget. 
Sale priceFrom $3,325.00 USD Regular price$3,500.00 USD
EasyMESUR
Mark-10 EasyMESUR Test Frame-Series F: 750, 1500 lbFMark-10 EasyMESUR Test Frame-Series F: 750, 1500 lbF
Mark-10 Mark-10 EasyMESUR Test Frame-Series F: 750, 1500 lbF
SKU: F755-EM, F755S-EM, F1505-EM, F1505S-EM
  • Available capacities of 750 lbF, 1500 lbF
  • Travel: 33 in or 55.35 in
  • A-la-carte platform, custom configuration as appropriate for the application and budget. 
Sale priceFrom $8,193.75 USD Regular price$8,625.00 USD
LD Series
LD5, LD10, LD30, LD50, LD100 Dual Column Material Test System, Motorized Test Stand, Lloyd InstrumentsLD5, LD10, LD30, LD50, LD100 Dual Column Material Test System, Motorized Test Stand, Lloyd Instruments
Lloyd Instruments Lloyd Instruments LD Series Dual Column Material Test System
SKU: LD5S-115V, LD5E-115V, LD10S-115V, LD10E-115V, LD30S-115V,...
  • Available capacities of 5 kN, 10 kN, 30 kN and 50 kN.
  • Extensometers are available with this series.
  • Material test system, software has inputs for material dimensions used in calculations of results such as strain, modulus, yield...
TCM Series
TCM100 and TCM350 Motorized Test Stands, Motorized Test Stand, ChatillonChatillon TCM100 and TCM350 Motorized Test Stands
Chatillon Chatillon TCM100 and TCM350 Motorized Test Stands
SKU: TCM100S-115-A, TCM100S-115-B, TCM100E-115-A, TCM100E-115-...
  • Capacity: 100 & 350 lbF
  • Basic force testing
  • Force gauge based tester
Sale priceFrom $4,899.40 USD Regular price$5,764.00 USD
TSTM-DC, Motorized Torque Test Stand, Motorized Torque Test Stands, Mark-10TSTM-DC, Motorized Torque Test Stand, Motorized Torque Test Stands, Mark-10
Mark-10 Mark-10 TSTM-DC, Motorized Torque Test Stand
SKU: TSTM-DC, TSTMH-DC, TSTM-DC-1, TSTMH-DC-1, TSTM-DC-2, TSTM...
  • Capacity: 100 lbF-in, optional 200 lbF-in
Sale priceFrom $8,075.00 USD Regular price$8,500.00 USD

Recently viewed