This pneumatic vice grip has pneumatic on one side and manual tightening action on the other side. This allows for offset sample alignment. This grip has 1 kN [225 lbF] capacity. The built in eye end socket is a standard 5/8".
This grip is sold as a set (2 grips). The jaw faces are sold separate. Foot pedals and switches to activate the pneumatic actuator is also sold separate.
- Capacity: 1 kN [225 lbF]
- Connection: 5/8" eye end
- Body: Anodized aluminum
- Weight per grip without jaws: 0.4 kg
- Opening: 0-20 mm if using any jaw face other than rubber, rubber has 0-18 mm opening.
Jaw Faces Available
|01/4238||30mm x 30mm, Plain faces|
|01/4239||30mm x 30mm, Rubber faces|
|01/4240||30mm x 30mm, Cross-Cut faces|
|01/4241||30mm x 30mm, V-Notch faces|
|01/4242||30mm x 30mm, V-Notch faces|
|01/4243||30mm x 30mm, Wave face|
|01/4244||30mm x 30mm, Diamond Coated faces|
|01/4245||30mm x 50mm, Plain jaw faces|
|01/4246||30mm x 50mm, Rubber jaw faces|
|01/4247||30mm x 50mm, Cross-Cut jaw faces|
|01/4248||30mm x 50mm, Wave jaw faces|
|01/4249||30mm x 50mm, Diamond Coated jaw faces|
|01/4250||30mm x 80mm, Plain jaw faces|
|01/4251||30mm x 80mm, Rubber jaw faces|
|01/4252||30mm x 80mm, Cross-Cut jaw faces|
|01/4253||30mm x 80mm, Wave jaw faces|
|01/4254||30mm x 80mm, Diamond Coated jaw faces|
|01/4255||30mm x 100mm, Plain jaw faces|
|01/4256||30mm x 100mm, Rubber jaw faces|
|01/4257||30mm x 100mm, Cross-Cut jaw faces|
|01/4258||30mm x 100mm, Wave jaw faces|
|01/4259||30mm x 100mm, Diamond Coated jaw faces|
Note: Grip does not include jaws. Jaws sold as a set of 4 (2 for each grip).