Puncture Fixtures, Puncture Fixture, JLWForce
Puncture Fixtures, Puncture Fixture, JLWForce
Puncture Fixtures, Puncture Fixture, JLWForce
Puncture Fixtures, Puncture Fixture, JLWForce
Roll over image to zoom in Click on image to zoom
Puncture Fixtures, Puncture Fixture, JLWForce
Puncture Fixtures, Puncture Fixture, JLWForce
Puncture Fixtures, Puncture Fixture, JLWForce
Puncture Fixtures, Puncture Fixture, JLWForce

Puncture Fixtures

Puncture Fixtures, Food Texture Probes & Jacobs Chuck Vices

JLWForce

{formbuilder:40269}

Description

We have many options for puncture testing equipment. We can have fixtures built to fit your particular machine or we can provide a full system solution.

The following information is required to quote a puncture fixture. Some of these questions may not be relevant depending on the type of puncture test.

  1. What is the material being tested?
  2. Are there any ASTM standards being followed?
  3. What is the required diameter of the probe?
  4. What is the required diameter of the lower fixture opening?
  5. What is the force range of the test?
  6. Requesting a full system or just the fixture?

Puncture strength tests are used to determine the puncture or rupture characteristics of a material. This is generally a test where a material is compressed by a probe or other type of device until the material ruptures or until the stretch limit is achieved.

Puncture testing is commonly used to determine the strength of a material such as film, rubber or membrane.  Puncture testing may be used in medical applications for determining the sharpness of a syringe, scalpel or blade or to measure the resistance and pliability of synthetic skin.

Puncture resistance is the relative ability of a material to inhibit the progression of a tear once it has been pierced by a cut or a nick. Performed under standard conditions, the test imparts a biaxial stress that is similar to the type of stress encountered in many product end user applications. The puncture resistance will depend on the nature of puncture attempt, with the two most important features being point sharpness and force.

An example of a material that is used extensively is Stretch wrap film. It is an extremely important packaging material used in applications from heavy duty pallet strapping to sealing food items in containers to keep them fresh. Puncture resistance is a important parameter puncture strength with regards to preventing accidental puncture damage thereby helping to maintain product freshness.

| Test Standards

  • ASTM D5635 / D5635M - 11 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
  • ASTM D4833 - 07 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
  • ASTM F1306 - 90(2008)e1 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
  • ASTM F2878 - 10 Standard Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
  • ASTM F2132 - 01(2008)e1 Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps

     

     

    Accessories

    Male 5/8" Eye End to Thread Adapter, AC1047 Series Eye Ends
    AC1046 Series Eye End Socket for Grips/Fixtures
    AC1045 Series Eye End Adapter for Force Gauges

    Related Products

    COF62 Coefficient of Friction (COF) Fixture
    Mark-10 G1110 Puncture Fixture in accordance to ASTM D5748

    Thread and Eye End Adapters

    View all
    Male 5/8" Eye End to Thread Adapter, AC1047 Series Eye Ends, Male Eye End to Thread Adapters, Mark-10Male 5/8" Eye End to Thread Adapter, AC1047 Series Eye Ends, Male Eye End to Thread Adapters, Mark-10
    Mark-10 Male 5/8" Eye End to Thread Adapter, AC1047 Series Eye Ends
    SKU: AC1047, AC1047-1, AC1047-2, AC1047-3, AC1047-4
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • Thread sizes of #10-32M, 5/16-18M, 1/2-20M, 1/4-28M.
    From $80.75 USD $85.00 USD
    A12/6-5/16-18UNC, Eye End Adapter 12mm to 5-16-18UNC, Male Eye End to Thread Adapters, JLWForce
    JLWForce A12/6-5/16-18UNC, 12mm Male Eye End to 5-16-18UNC Thread Adapter
    SKU: A12/6-5/16-18UNC
    • Male-Type O, 12 mm male eye end with 6 mm pin
    • 5/16-18M UNC thread
    $236.00 USD
    A15.8/8-12/6, Male 5/8" Eye End to Male Instron Type Om Fitting, Male Eye End to Male Eye End Adapters, JLWForce
    JLWForce A15.8/8-12/6, 5/8" Male Eye End to Type O Male Eye End Adapter
    SKU: A15.8/8-12/6
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • Male-Type O, 12 mm male eye end with 6 mm pin
    $133.00 USD
    A31.7/12.7-31.7/12.7, Male 1.25" Eye End to Male 1.25" Eye End Adapter, Male Eye End to Male Eye End Adapters, JLWForce
    JLWForce A31.7/12.7-31.7/12.7, 1.25" Male Eye End to 1.25" Male Eye End Adapter
    SKU: A31.7/12.7-31.7/12.7
    • Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
    • Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
    $133.00 USD
    Clevis adapter to fit grips that have a 5/8" eye end to a load cell or test stand with a 1.25" eye end.
    JLWForce A15.8/8-31.7/12.8, 5/8" Male Eye End to 1.25" Male Eye End Adapter
    SKU: A15.8/8-31.7/12.8
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • 1.25" (31.7 mm) male eye end
    $157.00 USD
    AC1046 Series Eye End Socket for Grips/Fixtures, Female Eye End to Thread Adapter, Mark-10AC1046 Series Eye End Socket for Grips/Fixtures, Female Eye End to Thread Adapter, Mark-10
    Mark-10 AC1046 Series Eye End Socket for Grips/Fixtures
    SKU: , ,
    • 5/8" [15.9 mm] female eye end with 8 mm pin
    • Thread sizes of #10-32M, 5/16-18M, 1/2-20M.
    $47.50 USD $50.00 USD
    AC1045 Series Eye End Adapter for Force Gauges, Male Eye End to Thread Adapters, Mark-10AC1045 Series Eye End Adapter for Force Gauges, Male Eye End to Thread Adapters, Mark-10
    Mark-10 AC1045 Series Eye End Adapter for Force Gauges
    SKU: AC1045, AC1045-1, AC1045-2
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • Thread sizes of #10-32F, 5/16-18F, 1/2-20M.
    $99.75 USD $105.00 USD
    Mark-10 Thread Adapters, Thread Adapters, Mark-10
    Mark-10 Mark-10 Thread Adapters
    SKU: G1051, G1050, G1039, G1030, G1067, G1048, G1057, G1054, G...
    • Thread adapters for sizes #10-32, #4-40, 5/16-18, M4, M6, 1/2-20, 1/4-28.
    From $9.50 USD $10.00 USD
    DF Force Gauge Shaft, Thread Adapters, Chatillon
    Chatillon SPK-DF-115X, Chatillon Force Gauge Shaft for DFS and DFE
    SKU: SPK-DF-115A, SPK-DF-115B, SPK-DF-115C
    • Adapter shafts for Chatillon Series DFE II, DFS II, DFE, DFS, DFIS force gauges.
    $40.85 USD $43.00 USD
    Thread Adapters<br> Thread to Thread Conversion, Thread Adapters, JLW Instruments
    JLW Instruments Thread Adapters, Thread to Thread Conversion
    SKU: , , , , , , , , , , , , , , , , , , , , , , , ,
    • Thread adapters for sizes #10-32, #4-40, 5/16-18, M4, M6, 1/2-20, 1/4-28, 1/4-20.
    From $14.00 USD
    Chatillon Eye Ends Thread to Eye End Conversion, Male Eye End to Thread Adapters, ChatillonChatillon Eye Ends Thread to Eye End Conversion, Male Eye End to Thread Adapters, Chatillon
    Chatillon Chatillon Eye Ends Thread to Eye End Conversion
    SKU: SPK-TLC-001, SPK-TLC-002, SPK-TLC-003
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • #10-32, 1/4-28 or 1/2-20 thread
    From $118.75 USD $125.00 USD
    G1088, Spanner Wrench, Spanner Wrench, Mark-10
    Mark-10 G1088, Spanner Wrench
    SKU: G1088
    • Tightens and loosens Mark-10 Eye Ends.
    $57.00 USD $60.00 USD
    Chatillon Thread Adapters, Thread Adapters, Chatillon
    Chatillon Chatillon Thread Adapters
    SKU: 3127, 3157, NC002686, P-10020, P-10269, 17039, NC000686, ...
    From $10.00 USD
    A15.8/8-5.9/2.5, Male 5/8" Eye End to Male 2.5 Clevis Pin Adapter Kit, Male Eye End to Male Eye End Adapters, JLWForce
    JLWForce A15.8/8-5.9/2.5, 5/8" Male Eye End to Type OO Male Eye End Adapter
    SKU: A15.8/8-5.9/2.5
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • 5.9 mm eye end post, 2.5 mm Clevis pin
    $279.00 USD
    AC1047-1, Male 5/8" Eye End to 5/16-18M Thread Adapter, Male Eye End to Thread Adapters, Mark-10
    Mark-10 AC1047-1, Male 5/8" Eye End to 5/16-18M Thread Adapter
    SKU: AC1047-1
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • 5/16-18M thread
    • Mount grips that have a 5/8" eye end to most Mark-10 test stands.

     

    $80.75 USD $85.00 USD
    A158-M16X2-L40, 5/8" Eye End to M16x2 Thread Adapter, Male Eye End to Thread Adapters, JLWForceA158-M16X2-L40, 5/8" Eye End to M16x2 Thread Adapter, Male Eye End to Thread Adapters, JLWForce
    JLWForce A158-M16X2-L40, 5/8" Eye End to M16x2 Thread Adapter
    SKU: A158-M16X2-L40
    • 5/8" [15.8 mm] male eye end with 8 mm diameter pin
    • M16X2-L40 external thread
    $133.00 USD
    Swivel Adapter, Swivel Adapters, Mark-10
    Mark-10 Mark-10 Swivel Adapter for Sample Alignment G1018(-1/-2)
    SKU: G1018-1, G1018-2
    • Swivel to adjust for proper sample alignment.
    • Thread sizes #10-32 or 5/16-18.
    $66.50 USD $70.00 USD
    A31.7/12.7-1-14, Male 1.25" to 1"-14 Thread Adapter, Male Eye End to Thread Adapters, JLWForce
    JLWForce A31.7/12.7-1-14, 1.25" Male Eye End to 1"-14 Thread Adapter
    SKU: A31.7/12.7-1-14
    • Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
    • 1"-14 Male Thread
    $285.00 USD
    AC1046 Eye End, 5/8" Female Eye End to #10-32M Thread, Female Eye End to Thread Adapter, Mark-10
    Mark-10 AC1046 Eye End, 5/8" Female Eye End to #10-32M Thread
    SKU: AC1046
    • 5/8" [15.9 mm] female eye end with 8 mm pin
    • #10-32M Thread
    $47.50 USD $50.00 USD
    A15.8/8-20/8, Male 5/8" Eye End to 20 mm Female Eye End, Male Eye End to Female Socket, JLWForceA15.8/8-20/8, Male 5/8" Eye End to 20 mm Female Eye End, Male Eye End to Female Socket, JLWForce
    JLWForce A15.8/8-20/8, 5/8" Male Eye End to 20 mm Female Eye End Adapter
    SKU: A15.8/8-20/8
    • 1.25" (31.7 mm) Male Eye End
    • 1"-14 Male Thread
    $133.00 USD
    AC1046-1 Eye End, 5/8" Female Eye End to 5/16-18M Thread, Female Eye End to Thread Adapter, Mark-10
    Mark-10 AC1046-1 Eye End, 5/8" Female Eye End to 5/16-18M Thread
    SKU: AC1046-1
    • 5/8" [15.9 mm] female eye end with 8 mm pin
    • 5/16-18M Thread
    $47.50 USD $50.00 USD
    AC1046-2, 5/8" Female Eye End to 1/2-20M Thread Adapter, Female Eye End to Thread Adapter, Mark-10
    Mark-10 AC1046-2, 5/8" Female Eye End to 1/2-20M Thread Adapter
    SKU: AC1046-2
    • 5/8" [15.9 mm] female eye end with 8 mm pin
    • 1/2-20M Thread
    $47.50 USD $50.00 USD
    A12-10-32M, 12mm Male Eye End to 10-32 Male Thread Adapter
    JLWForce A12-10-32M, 12mm Male Eye End to 10-32 Male Thread Adapter
    SKU: A12-10-32M
    • Male-Type O, 12 mm male eye end with 6 mm pin
    • #10-32M UNF thread
    $236.00 USD
    A31.7/12.8-M30x2, 1.25" Male Eye End to M30x2 RH Thread Adapter
    JLWForce A31.7/12.8-M30x2, 1.25" Male Eye End to M30x2 RH Thread Adapter
    SKU: A31.7/12.8-M30x2
    • Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
    • M30x2 External Thread
    $323.00 USD
    Thread adapter for ergonomic accessories M10F to 5/16-18MThread adapter for ergonomic accessories M10F to 5/16-18M
    JLW Instruments Thread adapter for ergonomic accessories M10F to 5/16-18M
    SKU: TA:M10F-516M
    • Chatillon and Mark-10 ergonomic attachments to a Shimpo force gauge.
    $40.00 USD
    A31.7-1.25Z-12, 1.25" Male Eye End to 1.25"-12UNF Thread Adapter
    JLWForce A31.7-1.25Z-12, 1.25" Male Eye End to 1.25"-12UNF Thread Adapter
    SKU: A31.7-1.25Z-12
    • Male Type D, 1.25" [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
    • 1.25"-12UNF External Thread
    $236.00 USD
    A158-2510, 5/8" Male Eye End to 25 mm Male Eye EndA158-2510, 5/8" Male Eye End to 25 mm Male Eye End
    JLWForce A158-2510, 5/8" Male Eye End to 25 mm Male Eye End
    SKU: A158-2510
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • 25 mm male eye end with 10 mm pin
    • Compatible with Shimadzu 10 kN and 20 kN test stands
    $133.00 USD
    A158-1-14, 5/8" Male Eye End to 1-14 Male Thread Adapter
    JLWForce A158-1-14, 5/8" Male Eye End to 1-14 Male Thread Adapter
    SKU: A158-1-14
    • Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
    • 1"-14 Male Thread
    $285.00 USD
    A158-16, 5/8" Male Eye End to 16 mm Male Eye End AdapterA158-16, 5/8" Male Eye End to 16 mm Male Eye End Adapter
    JLWForce A158-16, 5/8" Male Eye End to 16 mm Male Eye End Adapter
    SKU: A158-16
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • 16 mm male eye end with 6.5 mm pin
    • Compatible with Shimadzu 100 N to 5 kN test stands
    $133.00 USD
    A158-M12F, 5/8" Male Eye End to M12 Thread Adapter
    JLWForce A158-M12F, 5/8" Male Eye End to M12 Thread Adapter
    SKU: A158-M12F
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • M12x1.75 female thread
    $133.00 USD
    A158-318, 5/8" Male Eye End to 1.25" Female Eye End Adapter
    JLWForce A158-318, 5/8" Male Eye End to 1.25" Female Eye End Adapter
    SKU: A158-318
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • 16 mm male eye end with 6.5 mm pin
    $133.00 USD
    A158-35 5/8 inch Male Eye End to 35 mm Male Eye End AdapterA158-35 5/8 inch Male Eye End to 35 mm Male Eye End Adapter
    JLWForce A158-35 5/8 inch Male Eye End to 35 mm Male Eye End Adapter
    SKU: A158-35
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • 35 mm male eye end with 13 mm pin
    • Compatible with Shimadzu 50 kN test stands
    $245.00 USD
    A317-35 1.25 inch Male Eye End to 35 mm Male Eye End Adapter
    JLWForce A317-35 1.25 inch Male Eye End to 35 mm Male Eye End Adapter
    SKU: A317-35
    • 1.25" (317 mm mm) male eye end, 1/2" (12.8 mm) pin
    • 35 mm male eye end, 13 mm pin
    • Compatible with Shimadzu 50 kN test stands
    $245.00 USD
    A158-M30X2, 5/8" Male Eye End to M30X2 Female Thread Adapter
    JLWForce A158-M30X2, 5/8" Male Eye End to M30X2 Female Thread Adapter
    SKU: A158-M30X2
    • 5/8" [15.8 mm] male eye end with 8 mm pin
    • 16 mm male eye end with 6.5 mm pin
    $395.00 USD

    Related Categories

    View All
    Manual Test Stands
    Manual Test Stands
    Motorized Test Stands, Chatillon CS test stand
    Motorized Test Stands and Material Test Systems
    Force Gauges
    Force Gauges
    Collections of different types of grips, fixtures, and adapters
    Grips, Fixtures, and Adapters
    Thread and Eye End Adapters
    Thread and Eye End Adapters
    Load Cells
    Load Cells
    Wire Crimp Pull Testers
    Wire Crimp Pull Testers
    Dynamometers
    Crane Scale, Mechanical & Digital Dynamometers

    Recently viewed