Obsolete, replaced by Chatillon TCM motorized test stand.

If over 350 lbf is needed, Mark-10 has an ESM750 which has a 750 lbf capacity and mounting is available for Chatillon force gauges.

The CHATILLON® LTCM500 Series is an economical, motorized tester optimized for product floor operation. When combined with a Chatillon DF Series digital force gauge, it provides users with an easy-to-use testing system for tensile, compression, peel and flexural testing applications.

The LTCM500 Series features a large working area and 5-inch (130mm) throat ideal for large sample sizes. The base features pre-drilled holes for fitting fixtures and specialized testing jigs. Crosshead travel is controlled from a simple console or using an optional footswitch controller. Crosshead travel extends to 15 inches (380mm). Speed may be set from 0.2 to 20 in/min or 5 to 500 mm/min. A digital display indicates the travel speed during a test. The return speed may be configured to automatically return at maximum speed. Mechanical deflection limits, located on the column face can be used to set travel limit setpoints. The crosshead will stop when either the upper or lower deflection limit is contacted.

Compatible Force Gauges

Documents

LTCM-500 Data Sheet

Obsolete Products