The TSTM-DC Advanced Motorized Torque Test Stand offers all the mechanical specifications of the TSTM motorized test stand, including standard 100 lbFin (11.5 Nm) torque capacity, versatile modular design, quick engagement and disengagement of samples, fixture mounting plate, stepper motor design that prevents speed variation with load, and more. A 200 lbFin (22 Nm) capacity upgrade is available as an option. The TSTM-DC offers expanded capabilities, including full PC control, programmable angle limits, programmable cycling, auto return, password protection, and other features.

Features

Maximum load

Standard: 100 lbFin [11.5 Nm]
Optional: 200 lbFin [22.0 Nm]
Maximum torque decreases proportionately with speed. Examples:
- Maximum torque at 60 RPM = 25 lbFin [2.8 Nm]
- Maximum torque at 30 RPM = 50 lbFin [5.6 Nm]

Speed range

Standard: 0.01 - 15 RPM [0.05 - 90°/s]
Optional: 0.04 - 60 RPM [0.2 - 360°/s] *

Speed accuracy

±0.2% of setting, ±0% variation with load

Digital display of angle
Programmable angle limits
Rotational travel accuracy: ±0.7° / 0.02 rev.
Rotational travel repeatability: 0.1° / 0.01 rev.
Rotational travel resolution: 0.1° / 0.01 rev.
Throat: 4.10" [104 mm]
Manual adjustment: 12° / adjustment knob rev
Angle dial with 2° resolution
Maximum slider travel: 15.5" [394 mm]
Slider travel rate: 1.047" [26.6 mm] / lever rev
Universal power supply: 80-250 VAC
CE mark
Computer Control
An RS-232 port is provided to interface with a PC. A command set is provided to allow for full control from a PC.
The following are required with PC control:

Model 7i or 5i force/torque indicator (more info)
09-1162 multi-function cable (see below)
09-1056 serial cable (see below)

Digital Angle Indication

Rotational travel is indicated in degrees or revolutions, with RS-232 output of angle data.

Programmable Angle Limits

The TSTM-DC can stop at or cycle between programmable upper and lower angle limits. Programmable in degrees or revolutions.

Overload Protection

Protects the torque sensor against overload (requires a Model 7i or 5i force/torque indicator and 09-1162 multi-function cable). The user programs the desired percentage of full scale of the sensor.

Auto-return

The torque table rotates to an angle limit or torque set point (requires a Model 7i or 5i force/torque indicator and 09-1162 cable), stops, and reverses direction at full speed to the other angle limit or torque set point.

Cycling / Dwell Time

Same as auto-return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds. Independent CW and CCW speeds may be programmed.

Programmable Button Functions

Programmable CW and CCW button functions - momentary motion, maintained motion, or auto.

Independent CW and CCW Speeds

Configurable speeds for CW and CCW directions

Selectable speed units of measurement (RPM and °/s)
Password protection

Prevents unauthorized changes to controller settings.

Specifications

Accuracy: ±0.2% of full scale
Sampling rate: 3,000 Hz
Power: AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
Battery life

Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use

Measurement units: lbF, ozF, gF, kgF, N, kN, mN (depending on model)
Outputs

USB / RS-232: Configurable up to 115,200 baud.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VDC, ±0.25% of full scale at capacity,
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.

Safe overload: 200% of full scale (display shows “OVER” at 110% and above)
Weight

M4-012 - M4-100: 1.0 lb [0.45 kg]
M4-200 - M4-500: 1.2 lb [0.54 kg]

Warranty: 3 years (see individual statement for further details)

Included Items

DC controller
Controller connection cable
Indicator mounting kit
Encoder cable
Column cap with hardware
Allen wrench set
Thumb screw for mounting indicator
Power cord
Resource CD
Base with hardware (TSTM-DC)
Mounting leg with hardware (TSTMH-DC)
Additional column cap with hardware (TSTMH-DC)

Documents

TSTM-DC 4 Data Sheet

Controller Manual

TSTM Test Stand Manual

Dimensions in[mm]

Torque Test Stands