This family of force testers is designed for tension and compression force testing applications, with force capacities up to 1,500 lbF (6.7 kN). Select from a broad range of force sensor capacities and an expansive array of grips and fixtures.
Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.
Features
- Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.
- Deflection compensation utility can be used to compensate for deflection within the grips and attachments. The deflection offset file can be associated with the test setup file.
- Collects load and travel data at up to 1,000 Hz, and allows up to 4 million data points per run.
- Save or export data automatically or manually. Save individual runs and results to a USB drive or file location of your choice.
- Manual control can be used tor running a quick test without having to create a test profile.
- Control user access with three different permission levels.
Specifications
F755 | F755S | F1505 | F1505S | |
Load capacity: (see 1. below) |
750 lbF [3.4 kN] |
1,500 lbF [6.7 kN] |
||
Maximum travel: | 32.0 in [813 mm] |
14.2 in [360 mm] |
32 in [813 mm] |
14.2 in [360 mm] |
Speed range: | 0.001 - 60 in/min [0.02 - 1,525 mm/min] |
0.001 - 70 in/min [0.02 - 1,800 mm/min] |
||
Load accuracy (% of full scale) |
Test frame + force sensor, calibrated together: ±0.1% Test frame alone: ±0.1% Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15% |
|||
Speed setting accuracy: | ±0.2% | |||
Load sampling rate: | 20,000 Hz | |||
Data acquisition rate: | 1,000 Hz | |||
Speed accuracy: | ±0%, stepper motor driven | |||
Distance accuracy: | ±0.002 in [0.05 mm], factory-compensated at up to full load | |||
Distance resolution: | 0.0005 in [0.01 mm] | |||
Limit switch repeatability: | ±0.001 in [0.03 mm] |
|||
Power: | Universal input 100-240 VAC, 50/60 Hz, 120W | Universal input 100-240 VAC, 50/60 Hz, 450W | ||
Fuse type: | 4A, 3AG, SLO BLO | |||
Weight (test frame only): | 184 lb [83 kg] |
149 lb [68 kg] |
197 lb [89 kg] |
157 lb [71 kg] |
Shipping weight: | 235 lb [107 kg] |
195 lb [88 kg] |
247 lb [112 kg] |
205 lb [93 kg] |
Environmental conditions: | Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95°F [5 - 35°C] Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 |
|||
Warranty: | 3 years [see individual statement for further details] | |||
Conformance: | CE |
1. Load capacity is reduced at higher speeds, as follows:
- F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
- F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min
2. May be extended via single- or double-column extensions.
Included Items, IMT Models-Control panel included
The F755-IMT, F755S-IMT, F1505-IMT, and F1505S-IMT advanced test frames are shipped as shown above, and includes the following accessories:
(1) Control panel with software installed, mounting bracket, and hardware
(1) USB cable
(1) Eye end kit for base
Includes: (1) eye end, (1) anchor pin, (2) lock rings
(2) Spanner wrench
(1) Power cord
(1) Allen wrench set
(1) NIST-traceable certificate of calibration, force
Included Items, IM Models-Control panel NOT included
The F755-IM, F755S-IM, F1505-IM, and F1505S-IM advanced test frames are shipped as shown at left, and includes the following accessories:
(1) USB flash drive containing software installation files
(1) USB dongle
(1) USB cable
(1) Eye end kit for base
Includes: (1) eye end, (1) anchor pin, (2) lock rings
(2) Spanner wrench
(1) Power cord
(1) Allen wrench set
(1) NIST-traceable certificate of calibration, force
Dimensions

Documents
- Wedge Grips, Vice Grips, COF Fixtures, Eccentric Roller Grips...
- Large assortment of grips and fixtures for compression and tension testing.