AC1047-1, Male 5/8" Eye End to 5/16-18M Thread Adapter

Many of the grips use a 5/8" eye end. The AC1047-1 eye end adapter can be used to mount grips that have a 5/8" eye end to a test stand that has a 5/16-18F connection.

Where used:

• Mark-10 Motorized Test Stands Base
• ESM303
• ESM301
• ESM750, if using AC1055 optional base plate
• ESM1500, if using AC1055 optional base plate
• Mark-10 Manual Test Stands Base
• ES05, if using AC1060 optional base plate
• ES10, if using AC1060 optional base plate
• ES20, if using AC1060 optional base plate
• ES30
  
• TSB100
• TSA750
• TSC1000
• TSF
• Other models may apply depending on the thread size. If you are not finding what you need please call or email us with the model and manufacturer of the equipment. Pictures of the equipment can also help.

Specifications 

Model No.		Thread	Eye End [Fitting]		Load Capacity		Weight
			mm	in	kN	lbF	kg	lbs
AC1047		#10-32M	15.8	5/8"	1	200	0.12	0.26
AC1047-1		5/16-18M	15.8	5/8"	2.5	500	0.12	0.27
AC1047-2		1/2-20M	15.8	5/8"	10	2,000	0.13	0.28
AC1047-3		1/4-28M	15.8	5/8"	1	200	0.13	0.26
AC1047-4		#10-32F	15.8	5/8"	1	200	0.13	0.29

Included Items

AC1047 series eye end adapters are sold as a kit, below are the parts included in each kit.

Model No.	Eye End	Anchor Pin	Locking Ring	Jam Washer
AC1047	G1081	G1080	G1079 [qty. 2]	-
AC1047-1	G1081-1			-
AC1047-2	G1081-2			-
AC1047-3	G1081-3			-
AC1047-4	G1081			G1084

*Only the AC1047-4 comes with the jam washer, which is needed with the Series R03 load cell. R03 uses a jam washer because the load cell has a stem.

Eye End Dimensions

G1080 Anchor Pin Dimensions

G1079 Locking Ring Dimensions

Documents

Mark-10 Eye End Data Sheet