Thread and eye end adapters are used to mount grips and fixtures to test stands, load cells and force gauges.
Grips on JLWForce.com with built in eye ends have a 5/8" eye end unless they have a load capacity of 50 kN or higher. Please see the product page for the grip to find the connection information.
Connection sizes for the force gauges on JLWForce.com (Mark-10 and Chatillon) depends on the load capacity. These are standard for force gauges made in the USA.
Load capacities of 100 lbf or less have #10-32M UNF
Load capacities of 200 lbf to 500 lbf have 5/16-18M UNC
Load capacities of 750 lbf or higher have 1/2-20 UNF
Test stands that include eye ends that are made by Mark-10, Chatillon and Lloyd Instruments have a 5/8" eye end unless it is a machine with a high load capacity. High load capacity machines usually have 1.25" eye ends.
Models are available to mount to any brand of equipment. Some adapters are not online, please contact us if you don't see what you need. Provide a model number of your test stand and load cell along with the grip/fixture you will be attaching will be needed to determine the correct adapter. If the model number isn't available provide the diameter of the eye end and the pin.