Description
These adapters allow a force gauge to be used in inline pull testing or weighing applications. A 5/16-18 threaded hole at each end is axially aligned with the load cell shaft in the force gauge, for mounting hooks or other attachments. Three adapters are offered, accommodating Mark-10 force gauges with capacities up to 500 lbF (2.5 kN).
Included Items
- (4) Thumb screw for force gauge
- (1) 5/16-18 male/male stud with jam nuts
Hooks are not included. The Mark-10 G1038 hook has a 5/16-18 thread that will attach to the bracket. The hook that attaches to the force gauge is dependent on the capacity of the force gauge.
Dimensions - in [mm]
| Model | A | B | C | D | E | F | G | H |
| AC1073-1 | 1.47 [38.1] |
0.74 [18.8] |
4.67 [118.6] |
4.27 [24.1] |
3.27 [83.1] |
1.87 [47.5] |
0.47 [12.0] |
0.65 [16.5] |
| AC1073-2 | 1.47 [38.1] |
0.74 [18.8] |
8.31 [211.1] |
7.91 [38.1] |
4.97 [126.3] |
2.72 [69.1] |
0.47 [12.0] |
0.65 [16.5] |
| AC1073-3 | 1.85 [47.0] |
1.12 [28.4] |
6.46 [25.4] |
6.06 [154.0] |
4.97 [126.3] |
2.72 [69.1] |
0.47 [12.0] |
1.03 [26.2] |
