The plates feature integrated eye ends, and require eye end adapters to mount to Mark-10 force gauges, load cells, and test stands.
- Compresses samples during testing
- Max. sample size: Ø2.20 in (55.9 mm) / Ø3.78 in (96.0 mm)
- Eye end mounting
- 2,000 lbF (9 kN) capacity
Round Compression Plates
Compression plates with diameters between 56 mm to 246 mm with load capacities up to 20 kN. These platens are etched with concentric rings for accurate specimen placement. They are available in aluminum or steel. Aluminum for testing soft samples ...
Square and Rectangular Compression Plates
Available in many sizes from 50 x 50 mm to 400 x 400 mm, in aluminum or steel. 5/8" built-in eye end, adapters are also available to fit other sizes.
Square and rectangular compression plates with load capacities up to 20 kN. These platens are etched with concentric rings for accurate specimen placement. They are available in aluminum or steel. Aluminum for testing soft samples such as cardboar...
Self-Aligning Compression Plates
Self-aligning compression plates designed to adjust to angular displacement of the material being tested. Diameters of 56 mm to 196 mm.
Self-aligning compression plates are designed to adjust to angular displacement of the material being tested. One Self-aligning compression plates is usually used along with a fixed compression plate. These plates can also be fixed to an angle by...
G1009 or G1009-1 Compression Plates
Light weight aluminum compression plates with threaded connections #10-32 or 5/16-18. Available in 2" or 3".
The G1009 and G1009-1 aluminum compression plates are ideal for testing springs, foams, and other materials. G1009 Diameter: 2 inches Capacity: 200 lbF Weight: .08 lb Connection: #10-32F thread (#10-32 M/M stud with jam nuts is included) G1009...
AC1047 Series Eye End Adapters for Load Cells and Test Stand Base
AC1047 Series eye end adapter kits mount to load cells and to test stand bases. They have 5/8" [15.8 mm] diameter which is commonly used with test frames, load cells, grips, and force gauges. These eye end adapters provide a commonly accepted indu...
Eye End Clevis Conversion Adapter
Male eye end to male eye end conversion. Diameters (mm): 15.8 to 5.9, 15.8 to 11.9, 15.8 to 31.7.
Eye ends are used on most universal testing machines, motorized test stands and some manual test stands. These ends can be used to convert from one size of an eye end to another allowing more options for grips that can be mounted. A158-59 Adapter...
- Self-tightening wedge grips for tensile testing.
- Easy clamping and unclamping action makes specimen loading fast.
- Self-tightening wedge design eliminates slippage.
- Available at higher capacities than most other tension grips.
- Can be used for tensile testing of wires, plastics, metals, elastomers.