![-Digital Force Gauge-[vendor]](http://cdn.shopify.com/s/files/1/2272/3691/products/M4-force-torque-4-g-case_{width}x.jpg?v=1573688069)
![-Digital Force Gauge-[vendor]](http://cdn.shopify.com/s/files/1/2272/3691/products/M4-force-torque-4-g-case_grande.jpg?v=1573688069)
Series 4 digital force gauges measure tension and compression force. Peak load is indicated on the LCD display. Capacities for this gauge range from 0.12 lb to 500 lb (0.5 N to 2500 N). Simple menu navigation allows for quick access to the gauges’ many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.
On-board data memory for up to 50 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand.
The force gauges are directly compatible with Mark-10 test stands, grips, and software.
On-board data memory for up to 50 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand.
The force gauges are directly compatible with Mark-10 test stands, grips, and software.
Features
- High-speed 3,000 Hz sampling rate
- USB, RS-232, Mitutoyo, and analog outputs
- Large backlit graphic display
- 50-point data memory with statistics (min, max, mean, standard deviation) and outputs
- Live load bar graph with set point markers
- Programmable set points, with alarms and outputs
- Peak readings and set points always displayed
- 5 selectable units of measurement
- Configurable audio alarms and key tones
- Password protection, configurable for individual keys and calibration
Display Indicators
Specifications
- Accuracy: ±0.2% of full scale
- Sampling rate: 3,000 Hz
- Power: AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
- Battery life
- Backlight on: up to 7 hours of continuous use
- Backlight off: up to 24 hours of continuous use
- Measurement units: lbF, ozF, gF, kgF, N, kN, mN (depending on model)
- Outputs
- USB / RS-232: Configurable up to 115,200 baud.
- Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
- Analog: ±1 VDC, ±0.25% of full scale at capacity,
- General purpose: Three open drain outputs, one input.
- Set points: Three open drain lines.
- Safe overload: 200% of full scale (display shows “OVER” at 110% and above)
- Weight
- M4-012 - M4-100: 1.0 lb [0.45 kg]
- M4-200 - M4-500: 1.2 lb [0.54 kg]
-
Warranty: 3 years (see individual statement for further details)
Included Items
- Carrying Case
- Attachments: Chisel, Cone, V-Groove, Hook, Flat, Extension Rod
- Universal Voltage AC Adapter
- Battery
- Quick-start guide
- USB Cable
- Resource CD (USB driver, MESUR™Lite software, MESUR™gauge and MESUR™gauge Plus 90-day trial, and user's guide), NIST-traceable
- Certificate of Calibration with Data
Models Available [Capacity x Resolution]
| Model | lbF | ozF | kgF | gF | N | kN | mN |
| M4-012 | 0.12 x 0.00005 | 2 x 0.001 | - | 50 x 0.02 | 0.5 x 0.0002 | - | 500 x 0.2 |
| M4-025 | 0.25 x 0.0001 | 4 x 0.002 | - | 100 x 0.05 | 1 x 0.0005 | - | 1000 x 0.5 |
| M4-05 | 0.5 x 0.0002 | 8 x 0.005 | - | 250 x 0.1 | 2.5 x 0.001 | - | 2500 x 1 |
| M4-2 | 2 x 0.001 | 32 x 0.02 | 1 x 0.0005 | 1000 x 0.5 | 10 x 0.005 | - | - |
| M4-5 | 5 x 0.002 | 80 x 0.05 | 2.5 x 0.001 | 2500 x 1 | 25 x 0.01 | - | - |
| M4-10 | 10 x 0.005 | 160 x 0.1 | 5 x 0.002 | 5000 x 2 | 50 x 0.02 | - | - |
| M4-20 | 20 x 0.01 | 320 x 0.2 | 10 x 0.005 | 10000 x 5 | 100 x 0.05 | - | - |
| M4-50 | 50 x 0.02 | 800 x 0.5 | 25 x 0.01 | 25000 x 10 | 250 x 0.1 | - | - |
| M4-100 | 100 x0.05 | 1600 x 1 | 50 x 0.02 | 50000 x 20 | 500 x 0.2 | - | - |
| M4-200 | 200 x 0.1 | 3200 x 2 | 100 x 0.05 | - | 1000 x 0.5 | 1x 0.0005 | - |
| M4-500 | 500 x 0.2 | 8000 x 5 | 250 x 0.1 | - | 2500 x 1 | 2.5 x 0.001 | - |
Documents
Dimensions in[mm]
| Models | Thread Size |
| M4-012 - M4-100 | #10-32 UNF |
| M4-200 - M4-500 | 5/16-18 UNC |
Force Gauge Comparison
| Mark-10 | |||||
| Series | Series 2 | Series 3 | Series 4 | Series 5 | Series 7 |
 |
 |
 |
 |
 |
|
| Capacities | 2 to 500 lbf 10 to 2,500 N |
0.12 to 500 lbf .5 to 2,500 N |
0.12 to 500 lbf .5 to 2,500 N |
0.12 to 2,000 lbf 0.5 to 10,000 N |
0.12 to 500 lbf 0.5 to 2,500 N |
| Accuracy | 0.5% FS | 0.3% FS | 0.2% FS | 0.1% FS | 0.1% FS |
| Data Outputs | - | USB | USB, RS-232, Mitutoyo, Analog | ||
| Calibration | Cert. of Conformance included. NIST & ISO Optional | NIST (No Data) Included. NIST with Data & ISO Optional | NIST Included. ISO Optional | ||
| Chatillon | |||
| Series | DFX2 (DFX-II) | DFE2 (DFE-II) | DFS2 (DFS-II) |
 |
 |
 |
|
| Capacities | 10 to 200 lbf 50 to 1,000 N |
2 to 500 lbf 10 to 2,500 N |
0.5 to 500 lbf 2.5 to 2,500 N |
| Accuracy | 0.3% FS | 0.25% FS | 0.2% FS |
| Data Outputs | - | USB, RS-232, Mitutoyo, Analog | |
| Calibration | Cert. of Conformance included. NIST & ISO Optional | NIST Included. ISO Optional | |
Related Products
15-1004 Mesurgauge Software
MESUR™gauge and MESUR™gauge Plus expand the functionality of force and torque measuring instruments and test stands. Both programs share the ability to capture and display data in graphical format for load vs. time or load vs. travel vs. time. MES...
ESM303 Motorized Test Stand
The ESM303 motorized test stand is configurable for tension and compression measurement applications up to 300 lbF [1.5 kN].
A wide range of tests can be performed, including break testing, cycling, limit testing to a load or distance, load holdi...
AC1030, AC1031, AC1032, AC1035 AC Adapters
AC Adapters / chargers for Mark-10 force and torque gauges and indicators.
Universal AC adapters / chargers for Mark-10 force and torque gauges and indicators.
Model
Description
AC1030
AC adapter / charger, 110V
AC1031
AC adapter / charger, 220V EUR
AC1032
AC adapter / charger, 220V UK
AC1035...
Digital Force Gauges
Chatillon and Mark-10 Digital Force Gauges
Digital force gauges can be used in a virtually limitless number of tension and compression force testing applications. All force gauges are able to capture the peak force in both tension and compression and have selectable units of measurement.
Mark-10
- Force and Torque Measurement Products
- Designed and manufactured in New York. Products come with a 3 year warranty. Great selection of products for any budget.