Indicators + Load Cells/Torque SensorsDigital indicators with interchangeable sensors to measure force and torque. This provides flexibility to use different capacities and types of sensors with the same indicator. Compatibility Chart Indicator Force Sensors-Load Cells Torque Sensors 3i, 5i, 7i R01, R02, R03, R04, R05, R06 R50, R51, R52 DFS2-R-ND SLC STS
Accessories and Replacement PartsAccessories and replacement parts for Chatillon, Lloyd Instruments and Mark-10 force and torque equipment.
Deadweight Tester AccessoriesAccessories for deadweight testers including tester oil and seal kits. Contact us to learn about deadweight testers
Clevis Grips and HooksUsed in testing tensile springs, chains and other general pull force testing. Connections on these grips and fixtures are threaded or have a female eye end. Grips and fixtures with a female eye end will have a 5/8" or 1.25" diameter. These sizes are standard for Lloyd Instruments, Chatillon, and Mark-10 equipment. We also sell these brands of test stands, load cells, and force gauges to use with our grips and fixtures. We have adapters to fit our grips and fixtures to any test stan...
Force GaugesForce gauges are used to measure tension and compression forces. The instrument can be used as a handheld gauge or mounted to a motorized or manual test stand. There are several types of force gauges: Digital Force Gauges - Digital readout of results, some gauges have outputs, break detection, load averaging. Mechanical Force Gauges - Analog readout of results. Since it doesn't run on battery, it does not need to be charged. Ergonomic Force Gauge Kits - Includes attachments used in ...
Manual Test StandsManual force test stands are a cost-effective solution for a simple, reliable way to perform compression and tension testing without the cost of motorized systems. These stands allow operators to apply force using a handwheel or lever. Ideal for quality control, incoming inspection, and low-volume testing, manual test stands are commonly used with digital force gauges to measure push and pull forces across a wide range of applications. Their compact footprint and durable construction make the...
Motorized Tensile Testers & Universal Testing MachinesWe supply a wide range of high-quality material test systems from trusted brands to meet the diverse needs of laboratories, manufacturers, and research facilities. As an authorized distributor, we offer solutions for testing tension, compression, flexure, peel, puncture and more—across materials such as metals, plastics, composites, textiles, and rubber. Whether you're looking for a universal testing machine, grips and fixtures, or specialized accessories, we can help you choose the right...
Grips, Fixtures and AdaptersJLW Instruments offers a wide variety of grips and fixtures to suit your industry and testing applications. Connections on these grips and fixtures are threaded or have a female eye end. Grips and fixtures with a female eye end will have a 5/8" or 1.25" diameter. These sizes are standard for Lloyd Instruments, Chatillon, and Mark-10 equipment. We also sell these brands of test stands, load cells, and force gauges to use with our grips and fixtures. We have adapters to fit our grips a...
Wire Crimp Pull TestersEnsure the integrity and reliability of your wire terminations with our wire crimp pull testers. Designed for quality assurance in manufacturing and assembly environments, our testers accurately measure the mechanical strength of wire crimps to meet industry standards. Whether you're working with small-gauge wires in electronics or heavier cables in industrial applications, we have testers to help you maintain consistent quality. Choose from manual, and motorized models with customizable ...
Communication CablesCommunication cables for use with Mark-10, Chatillon, and Lloyd Instruments equipment; including force gauges, test stands, and related equipment. Most cables are in stock. Contact us to learn more about cables
Mark-10 Motorized Test Stands and Material TestersMark-10 Motorized Test Stands offer precise and repeatable force testing for tension and compression applications. These motorized test stands provide controlled speed and travel for materials testing, quality control, and R&D environments. With a range of models to suit various force capacities and automation needs, they ensure accurate, consistent results in both production and lab settings. Series F + EasyMESUR - Basic configurable testers for everyday testing needs. Series F + Intelli...
Mark-10 Torque Gauges, Testers, and SensorsMark-10 torque gauges and torque testers are accurate and feature-rich torque measurement products ideal for a wide range of torque applications. All torque gauges and torque testers capture the peak torque in both directions (CW and CCW) and have selectable units of torque measurement. Torque capacities are available from 10 ozFin full scale to 5,000 lbFin, depending on the torque gauge or torque tester. Units may be handheld or used with a test stand and gripping fixtures to create a comple...
OHAUS Bench Scales & Lab BalancesAn ISO 9001:2008 manufacturer, OHAUS bench scales and lab balances are precise, reliable, affordable, and backed by industry-leading customer support. Contact us to learn more about OHAUS bench scales and lab balances
Erichsen Wuppertal Hydraulic Force Gauges & Load CellsApplications Heavy Industrial Paper Textile Mills (Paper/ Textile Tension) Field Service tasks to verify presses Monitor Drill/ Milling machine loads Aviation (Aircraft Load monitoring) The 343 can be used to monitor pulling loads on Tractors / Trailers Contact us to learn more about hydraulic force gauges
Chatillon Digital and Mechanical Force GaugesChatillon digital force gauges are powerful yet user-friendly force gauges, designed for either handheld use or combine with a MT manual Test Stand or TCM Motorized Test Stand. Combining with a test stand eliminates variables that might impact the force readings and offers an ideal solution for force measurement testing. The mechanical force gauges from Chatillon offer high precision compression testing (Push) and tensile testing (Pull) at a low cost on a wide range of testing applications. J...
Mark-10 SoftwareThe MESUR® software series expands the functionality of Mark-10 force and torque gauges, indicators, testers, and test stands. MESUR® Lite is a basic data acquisition program included free with all Mark-10 products, while MESUR®gauge is a more advanced software package which also plots, calculates statistics, generates reports, and provides other analysis tools. MESUR®gauge Plus adds motion control of certain test stand models. Software Comparison Chart
Mark-10 Manual Test StandsMark-10 offers the industry's most extensive line of manual force measurement and torque measurement test stands. Test stands are useful in eliminating variability inherent in hand testing and can help to automate test processes. A wide range of capacities, loading methods, and configurations are available. A test stand is an integral part of a testing system, typically also comprising a force gauge or torque gauge, grips, software, and accessories. Contact us to learn more about Mark-1...
Mark-10 Wire Pull TestersMark-10 wire crimp pull testers measure the pull-off force of crimped terminals, up to 200 lbF (1 kN) for wire diamaters up to 0.25" (6.4 mm). Select from the economical and quick-action WT3-201 benchtop tester, motorized WT3-201M, or portable hand-operated Series R06. All testers capture peak forces and allow the user to output to a PC via USB. Contact us to learn more about Mark-10 wire pull testers
Tensile Grips for Material TestingTensile grips are essential fixtures used to hold a test specimen securely during pull (tensile) testing. Designed for use with motorized test stands and universal testing machines, these grips ensure the sample remains firmly clamped while it is stretched under controlled tension. This allows for accurate measurement of mechanical properties such as tensile strength, elongation, modulus, and break force. Tensile grips are used in a wide range of applications across industries, including: P...
Mechanical Force GaugesJLW sells and stocks Chatillon and Dillon mechanical force gauges. We can supply these gauges with ISO-17025 calibration certificates. A mechanical force gauge is a precision instrument used to measure force, tension, or compression in various applications. Unlike digital force gauges, mechanical models rely on analog mechanisms, such as springs, levers, and dials, to display force measurements. They are commonly used in quality control, laboratory testing, and industrial applications due to...
Environmental MetersEnvironmental meters to monitor temperature, wind speed, humidity, heat index, and more.
Bollard Grips for Wire, Yarn, Filament TestingBollard grips are designed to minimize stress concentration on specimens, preventing grip-induced failures. They are ideal for tensile testing of cords, filaments, fibers, fine wire, and yarn. Connections on these grips and fixtures are threaded or have a female eye end. Grips and fixtures with a female eye end will have a 5/8" or 1.25" diameter. These sizes are standard for Lloyd Instruments, Chatillon, and Mark-10 equipment. We also sell these brands of test stands, load cells, and...
Force Gauge Sensors
Contact us to learn more about force gauges
Mark-10 Test Stand Accessories
Contact us to learn more about Mark-10 test stands
Packaging Fixtures
Fixtures for testing corrugated board, film, flip caps, and more. Contact us to learn more about packaging fixtures
Indicators + Load Cells/Torque Sensors
Digital indicators with interchangeable sensors to measure force and torque. This provides flexibility to use different capacities and types of sensors with the same indicator. Compatibility Chart Indicator Force Sensors-Load Cells Torque Sensors 3i, 5i, 7i R01, R02, R03, R04, R05, R06 R50, R51, R52 DFS2-R-ND SLC STS
Accessories and Replacement Parts
Accessories and replacement parts for Chatillon, Lloyd Instruments and Mark-10 force and torque equipment.
Deadweight Tester Accessories
Accessories for deadweight testers including tester oil and seal kits. Contact us to learn about deadweight testers
Clevis Grips and Hooks
Used in testing tensile springs, chains and other general pull force testing. Connections on these grips and fixtures are threaded or have a female eye end. Grips and fixtures with a female eye end will have a 5/8" or 1.25" diameter. These sizes are standard for Lloyd Instruments, Chatillon, and Mark-10 equipment. We also sell these brands of test stands, load cells, and force gauges to use with our grips and fixtures. We have adapters to fit our grips and fixtures to any test stan...
Force Gauges
Force gauges are used to measure tension and compression forces. The instrument can be used as a handheld gauge or mounted to a motorized or manual test stand. There are several types of force gauges: Digital Force Gauges - Digital readout of results, some gauges have outputs, break detection, load averaging. Mechanical Force Gauges - Analog readout of results. Since it doesn't run on battery, it does not need to be charged. Ergonomic Force Gauge Kits - Includes attachments used in ...
Manual Test Stands
Manual force test stands are a cost-effective solution for a simple, reliable way to perform compression and tension testing without the cost of motorized systems. These stands allow operators to apply force using a handwheel or lever. Ideal for quality control, incoming inspection, and low-volume testing, manual test stands are commonly used with digital force gauges to measure push and pull forces across a wide range of applications. Their compact footprint and durable construction make the...
Motorized Tensile Testers & Universal Testing Machines
We supply a wide range of high-quality material test systems from trusted brands to meet the diverse needs of laboratories, manufacturers, and research facilities. As an authorized distributor, we offer solutions for testing tension, compression, flexure, peel, puncture and more—across materials such as metals, plastics, composites, textiles, and rubber. Whether you're looking for a universal testing machine, grips and fixtures, or specialized accessories, we can help you choose the right...
Load Cells for Mark-10, Chatillon & Lloyds Instruments Test Stands
S-Beam, miniature, load button, sensors Designed for measuring tension and compression force. Models available for test stands and indicators. Contact us to learn more about test stands
Grips, Fixtures and Adapters
JLW Instruments offers a wide variety of grips and fixtures to suit your industry and testing applications. Connections on these grips and fixtures are threaded or have a female eye end. Grips and fixtures with a female eye end will have a 5/8" or 1.25" diameter. These sizes are standard for Lloyd Instruments, Chatillon, and Mark-10 equipment. We also sell these brands of test stands, load cells, and force gauges to use with our grips and fixtures. We have adapters to fit our grips a...
Wire Crimp Pull Testers
Ensure the integrity and reliability of your wire terminations with our wire crimp pull testers. Designed for quality assurance in manufacturing and assembly environments, our testers accurately measure the mechanical strength of wire crimps to meet industry standards. Whether you're working with small-gauge wires in electronics or heavier cables in industrial applications, we have testers to help you maintain consistent quality. Choose from manual, and motorized models with customizable ...
Communication Cables
Communication cables for use with Mark-10, Chatillon, and Lloyd Instruments equipment; including force gauges, test stands, and related equipment. Most cables are in stock. Contact us to learn more about cables
Mark-10 Motorized Test Stands and Material Testers
Mark-10 Motorized Test Stands offer precise and repeatable force testing for tension and compression applications. These motorized test stands provide controlled speed and travel for materials testing, quality control, and R&D environments. With a range of models to suit various force capacities and automation needs, they ensure accurate, consistent results in both production and lab settings. Series F + EasyMESUR - Basic configurable testers for everyday testing needs. Series F + Intelli...
Mark-10 Torque Gauges, Testers, and Sensors
Mark-10 torque gauges and torque testers are accurate and feature-rich torque measurement products ideal for a wide range of torque applications. All torque gauges and torque testers capture the peak torque in both directions (CW and CCW) and have selectable units of torque measurement. Torque capacities are available from 10 ozFin full scale to 5,000 lbFin, depending on the torque gauge or torque tester. Units may be handheld or used with a test stand and gripping fixtures to create a comple...
OHAUS Bench Scales & Lab Balances
An ISO 9001:2008 manufacturer, OHAUS bench scales and lab balances are precise, reliable, affordable, and backed by industry-leading customer support. Contact us to learn more about OHAUS bench scales and lab balances
Erichsen Wuppertal Hydraulic Force Gauges & Load Cells
Applications Heavy Industrial Paper Textile Mills (Paper/ Textile Tension) Field Service tasks to verify presses Monitor Drill/ Milling machine loads Aviation (Aircraft Load monitoring) The 343 can be used to monitor pulling loads on Tractors / Trailers Contact us to learn more about hydraulic force gauges
Mark-10 Load Cells
Contact us to learn more about Mark-10 load cells
Chatillon Digital and Mechanical Force Gauges
Chatillon digital force gauges are powerful yet user-friendly force gauges, designed for either handheld use or combine with a MT manual Test Stand or TCM Motorized Test Stand. Combining with a test stand eliminates variables that might impact the force readings and offers an ideal solution for force measurement testing. The mechanical force gauges from Chatillon offer high precision compression testing (Push) and tensile testing (Pull) at a low cost on a wide range of testing applications. J...
Mark-10 Software
The MESUR® software series expands the functionality of Mark-10 force and torque gauges, indicators, testers, and test stands. MESUR® Lite is a basic data acquisition program included free with all Mark-10 products, while MESUR®gauge is a more advanced software package which also plots, calculates statistics, generates reports, and provides other analysis tools. MESUR®gauge Plus adds motion control of certain test stand models. Software Comparison Chart
Mark-10 Manual Test Stands
Mark-10 offers the industry's most extensive line of manual force measurement and torque measurement test stands. Test stands are useful in eliminating variability inherent in hand testing and can help to automate test processes. A wide range of capacities, loading methods, and configurations are available. A test stand is an integral part of a testing system, typically also comprising a force gauge or torque gauge, grips, software, and accessories. Contact us to learn more about Mark-1...
Mark-10 Wire Pull Testers
Mark-10 wire crimp pull testers measure the pull-off force of crimped terminals, up to 200 lbF (1 kN) for wire diamaters up to 0.25" (6.4 mm). Select from the economical and quick-action WT3-201 benchtop tester, motorized WT3-201M, or portable hand-operated Series R06. All testers capture peak forces and allow the user to output to a PC via USB. Contact us to learn more about Mark-10 wire pull testers
Mark-10 Ergonomic Gauge Kits & Attachments
Contact us to learn more about Mark 10 force gauges
Mounting Kits and Other Hardware
Mounting hardware for test stands, load cells, torque sensors and force gauges.
Tensile Grips for Material Testing
Tensile grips are essential fixtures used to hold a test specimen securely during pull (tensile) testing. Designed for use with motorized test stands and universal testing machines, these grips ensure the sample remains firmly clamped while it is stretched under controlled tension. This allows for accurate measurement of mechanical properties such as tensile strength, elongation, modulus, and break force. Tensile grips are used in a wide range of applications across industries, including: P...
Mechanical Force Gauges
JLW sells and stocks Chatillon and Dillon mechanical force gauges. We can supply these gauges with ISO-17025 calibration certificates. A mechanical force gauge is a precision instrument used to measure force, tension, or compression in various applications. Unlike digital force gauges, mechanical models rely on analog mechanisms, such as springs, levers, and dials, to display force measurements. They are commonly used in quality control, laboratory testing, and industrial applications due to...
Environmental Meters
Environmental meters to monitor temperature, wind speed, humidity, heat index, and more.
Bollard Grips for Wire, Yarn, Filament Testing
Bollard grips are designed to minimize stress concentration on specimens, preventing grip-induced failures. They are ideal for tensile testing of cords, filaments, fibers, fine wire, and yarn. Connections on these grips and fixtures are threaded or have a female eye end. Grips and fixtures with a female eye end will have a 5/8" or 1.25" diameter. These sizes are standard for Lloyd Instruments, Chatillon, and Mark-10 equipment. We also sell these brands of test stands, load cells, and...
