{formbuilder:56981}
Description
Series F test frames with EasyMESUR® perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more.
Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface. EasyMESUR® force testers measure and analyze data with available graphing and reporting capabilities.
For unique needs, run the tester from a PC with your own custom application utilizing EasyMESUR®’s serial command library.
Engineered around a modular function platform, the EasyMESUR® run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more.
Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens.
Specifications
| F105-EM | F305-EM | F505-EM | F505H-EM | |
| Load capacity*: | 100 lbF [0.5 kN] |
300 lbF [1.3 kN] |
500 lbF [2.2 kN] |
|
| Maximum travel: | 18.0 in [457 mm] |
|||
| Standard speed range: | 0.5 – 13 in/min [13 – 330 mm/min] |
|||
| Optional speed range: | 0.02 – 45 in/min [0.5 – 1,100 mm/min] |
|||
|
Load accuracy (% of full scale) |
Test frame: ±0.1% Force sensor: Series FS05: ±0.1% | Series FS06: ±0.15% | Series R07: ±0.15% |
|||
| Load sampling rate: | 5,000 Hz | |||
| Data acquisition rate: | 100 Hz | |||
| Speed accuracy: | ±0.2% of setting, virtually no variation with load | |||
| Position accuracy: | ±0.006 in [0.15 mm], at any load or position | |||
| Distance resolution: | 0.001 in [0.02 mm] | |||
| Limit switch repeatability: | ±0.001 in [0.03 mm] | |||
| Power: | Universal input 100-240 VAC, 50/60 Hz, 120W | |||
| Fuse type: | 1.2 A, 250V, 3AG, SLO BLO | |||
| Weight (test frame only): | 60 lb [27 kg] |
70 lb [32 kg] |
||
| Shipping weight: | 75 lb [34 kg] |
85 lb [39 kg] |
||
| Environmental conditions: | Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95°F [5 - 35°C] Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 |
|||
| Conformance: | CE, UKCA | |||
| Warranty: | 3 years [see individual statement for further details] | |||
* Load capacity is reduced at higher speeds, as follows:
– F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
– F505 / F505H: limited to 300 lbF [1.5 kN] above 24 in [610 mm]/min
Downloads
EasyMESUR Software
The EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one convenient place. Use the 7” touchscreen to create and run a wide range of tests, including:
- Test to a load
- Test to a sample break
- Test to a distance
- Load holding
- Cycle testing
- Average force testing
Please note: some of the tests mentioned above will require optional functions to be purchased. This is explained in more detail further down this page.
View data in graphical format or results tables. Save or export data as needed, or generate a report.
Applications
These are a few applications this test stand can be used for.
Optional Functions
- Any of the below functions may be purchased at time of order or may be enabled in the field at a later date through a code activation process.
- A complete options package (EMP-COMP-1) is also available, including all of the below features at a discounted price.
- The test frames are shipped in Evaluation Mode, during which time all available functions are temporarily enabled for 160 hours of operation.
Individual Functions
| Function | Part No. | Description | Co-requirements | Price |
| Distance Measurement | EMF001-1 | Measure distance, with the ability to zero the reading. | - | $1,258.75 |
| Distance Limits | EMF002-1 | Stop at user-defined upper and lower distance limits. | - Distance Measurement (EMF001-1) | $351.50 |
| Preload | EMF003-1 | Zero the travel position automatically at a user-defined preload value. | - Distance Measurement (EMF001-1) | $351.50 |
| High Speed Extension | EMF004-1 | Extend the high end of the speed range, dependent upon test frame model. | - | $299.25 |
| Low Speed Extension | EMF005-1 | Extend the low end of the speed range, dependent upon test frame model. | - | $299.25 |
| Cycling | EMF006-1 | Set up to 100,000 cycles, with user-defined upper and lower dwell times. Cycle between any combination of limit switches, travel limits, and load limits. | - If cycling to distance limits, add Distance Measurement (EMF001-1) and Distance Limits (EMF002-1) | $422.75 |
| Break Detection | EMF007-1 | Stop when a user-defined drop in force occurs. | - | $422.75 |
| Load Holding | EMF008-1 | Stop at, and maintain, a user-defined load for a specified period of time. | - | $422.75 |
| FollowMe® | EMF009-1 | Push and pull on the sensor’s loading shaft to jog the crosshead up and down, ideal for manual positioning prior to a test. Speed increases with applied force. | - | $299.25 |
| Graphing & Reporting | EMF010-1 | Graph load vs. time or distance, view statistics, and generate a report, including graph, results, run data, and other information. | - If graphing load vs. distance, add Distance Measurement (EMF001-1) | $973.75 |
| PC Control | EMF011-1 | Control the test frame with your own application using via your own application with a library of motion control and data collection serial commands. While PC control is active, the control panel becomes a pendant, limited to basic, manual controls. | - AC1107 cable, test frame to PC | $1,496.25 |
| Coefficient of Friction Measurement | EMF012-1 | Measure static and dynamic coefficients of friction, with user-defined sled weight. | -G1086 coefficient of friction fixture | $445 |
| Spring Rate Measurement | EMF013-1 | Measure spring rate, with user-defined start and stop data collection triggers. | -Distance Measurement (EMF001-1) Suggested functions: -Distance Limits (EMF002-1) -Preload (EMF003-1) |
$445 |
Optional Function Packages
| Package | Part No. | Includes | Price |
| Distance Measurement | EMP001-1 | Distance Measurement (EMF001-1) Distance Limits (EMF002-1) Preload (EMF003-1) |
$1,847.75 |
| Speed Extension | EMP002-1 | High Speed Extension (EMF004-1) Low Speed Extension (EMF005-1) |
$570.00 |
| Advanced Functionality | EMP003-1 | Cycling (EMF006-1) Break Detection (EMF007-1) Load Holding (EMF008-1) FollowMe® (EMF009-1) |
$1,496.25 |
| Complete Options | EMP-COMP-1 | All functions | $5,586.00 |
Included Items
The F105-EM, F305-EM, F505-EM, and F505H-EM advanced test frames are shipped as shown at left, and includes the following accessories:
(1) Control panel, mounting bracket, and hardware
(1) #10-32M medium hook
(1) 5/16-18M large hook
(1) #10-32F 2” diameter compression plate
(1) #10-32 M/F 2” extension rod
(1) #10-32 F/F coupler
(1) Adapter, 5/16-18M to #10-32F
(1) Set screw, #10-32 x 3/4”
(2) Hex nut, #10-32
(1) Power cord
(1) Allen wrench set
Dimensions - in[mm]
Accessories
Related Products
- 225 lbF or 1,100 lbF capacity
- 2 in 1 Laptop Console
- Multistage and basic testing
- Height and distance measurement
- Deflection compensation
- Available capacities of 100 lbF, 300 lbF, 500 lbF.
- Save and recall test setups
- Multistage and basic testing
- Touchscreen or software
- Available capacities of 750 lbF, 1500 lbF.
- Save and recall test setups
- Multistage and basic testing
- Height measurement
- Deflection compensation
- Touchscreen or computer control
- Available capacities of 1 kN, 2.5 kN, 5 kN
- Extensometers are available with this series.
- Material test system, software has inputs for material dimensions used in calculations of results such as strain, modulus, yield...
- Available capacities of 100 lbF, 300 lbF, 500 lbF.
- Travel: 18 in [457 mm]
- A-la-carte platform, custom configuration as appropriate for the application and budget.
- Available capacities of 750 lbF, 1500 lbF
- Travel: 33 in or 55.35 in
- A-la-carte platform, custom configuration as appropriate for the application and budget.
- Available capacities of 5 kN, 10 kN, 30 kN, 50 kN and 100 kN.
- Extensometers are available with this series.
- Material test system, software has inputs for material dimensions used in calculations of results such as strain, modulus, yield...
- Capacity: 100 & 350 lbF
- Basic force testing
- Force gauge based tester
- Capacity: 100 lbF-in, optional 200 lbF-in
