Maximize Your Testing with Series F Test Frames + EasyMESUR®
Perform a full range of tension and compression tests—break, cycling, limit testing, load holding, average force, and more—right from the built-in EasyMESUR® touchscreen.
Set up and run tests, export results, and create reports via the integrated, easy-to-use touchscreen interface. EasyMESUR® force testers measure and analyze data with available graphing and reporting capabilities.
Keep costs low by adding only the features you need. Optional functions like distance measurement, graphing, and cycling can be unlocked at purchase or later via activation codes—so you’re never paying for more than you use. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available.
Effortless sample setup with optional FollowMe® positioning—just guide the crosshead by hand.
Engineered for Versatility, accommodate a wide range of sample sizes with generous travel, clearance, and depth. Modular designs support both single- and double-column extensions for oversized specimens, with vertical or horizontal orientations available. Choose from a full range of force sensor capacities and grips and fixtures to build your perfect system.
Looking for higher force capacities? Explore our 100 lbf, 300 lbf and 500 lbf models—part of the same trusted Series F EasyMESUR line.
Why buy from JLW Instruments?
We do more than sell—we calibrate, install, train, and support. Get expert advice, precision setup, and responsive service from a trusted partner in force measurement.
Specifications
| F755-EM | F755S-EM | F1505-EM | F1505S-EM | |
| Load capacity*: | 750 lbF [3.4 kN] |
1,500 lbF [6.7 kN] |
||
| Maximum travel: | 32.0 in [813 mm] |
14.2 in [360 mm] |
32 in [813 mm] |
14.2 in [360 mm] |
| Standard speed range: | 0.5 - 24 in/min [10 - 600 mm/min] |
|||
| Optional speed range: | 0.001 - 60 in/min [0.02 - 1,525 mm/min] |
0.001 - 70 in/min [0.02 - 1,800 mm/min] |
||
|
Load accuracy (% of full scale) |
Test frame: ±0.1% Force sensor: Series FS05: ±0.1% | Series R07: ±0.15% |
|||
| Load sampling rate: | 5,000 Hz | |||
| Data acquisition rate: | 100 Hz | |||
| Speed accuracy: | ±0.2% of setting, virtually no variation with load | |||
| Position accuracy: | ±0.006 in [0.15 mm], at any load or position | |||
| Distance resolution: | 0.001 in [0.02 mm] | |||
| Limit switch repeatability: | ±0.001 in [0.03 mm] | |||
| Power: | Universal input 100-240 VAC, 50/60 Hz, 300W | Universal input 100-240 VAC, 50/60 Hz, 450W | ||
| Fuse type: | 4A, 3AG, SLO BLO | |||
| Weight (test frame only): | 184 lb [83 kg] |
149 lb [68 kg] |
197 lb [89 kg] |
157 lb [71 kg] |
| Shipping weight: | 235 lb [107 kg] |
195 lb [88 kg] |
247 lb [112 kg] |
205 lb [93 kg] |
| Environmental conditions: | Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95°F [5 - 35°C] Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 |
|||
| Conformance: | CE, UKCA | |||
| Warranty: | 3 years [see individual statement for further details] | |||
* Load capacity is reduced at higher speeds, as follows:
- F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
- F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min
Downloads
Software
The EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one convenient place. Use the 7” touchscreen to create and run a wide range of tests, including:
- Test to a load
- Test to a sample break
- Test to a distance
- Load holding
- Cycle testing
- Average force testing
Please note: some of the tests mentioned above will require optional functions to be purchased. This is explained in more detail further down this page.
View data in graphical format or results tables. Save or export data as needed, or generate a report.
Optional Functions
- Any of the below functions may be purchased at time of order or may be enabled in the field at a later date through a code activation process.
- A complete options package (EMP-COMP-2) is also available, including all of the below features at a discounted price.
- The test frames are shipped in Evaluation Mode, during which time all available functions are temporarily enabled for 160 hours of operation.
Individual Functions
| Function | Part No. | Description | Co-requirements | Price |
| Distance Measurement | EMF001-2 | Measure distance, with the ability to zero the reading. | - | $1,819.25 |
| Distance Limits | EMF002-2 | Stop at user-defined upper and lower distance limits. | - Distance Measurement (EMF001-2) | $679.25 |
| Preload | EMF003-2 | Zero the travel position automatically at a user-defined preload value. | - Distance Measurement (EMF001-2) | $679.25 |
| High Speed Extension | EMF004-2 | Extend the high end of the speed range, dependent upon test frame model. | - | $570.00 |
| Low Speed Extension | EMF005-2 | Extend the low end of the speed range, dependent upon test frame model. | - | $570.00 |
| Cycling | EMF006-2 | Set up to 100,000 cycles, with user-defined upper and lower dwell times. Cycle between any combination of limit switches, travel limits, and load limits. | - If cycling to distance limits, add Distance Measurement (EMF001-2) and Distance Limits (EMF002-2) | $741.00 |
| Break Detection | EMF007-2 | Stop when a user-defined drop in force occurs. | - | $741.00 |
| Load Holding | EMF008-2 | Stop at, and maintain, a user-defined load for a specified period of time. | - | $741.00 |
| FollowMe® | EMF009-2 | Push and pull on the sensor’s loading shaft to jog the crosshead up and down, ideal for manual positioning prior to a test. Speed increases with applied force. | - | $513.00 |
| Graphing & Reporting | EMF010-2 | Graph load vs. time or distance, view statistics, and generate a report, including graph, results, run data, and other information. | - If graphing load vs. distance, add Distance Measurement (EMF001-2) | $1,591.25 |
| PC Control | EMF011-2 | Control the test frame with your own application using via your own application with a library of motion control and data collection serial commands. While PC control is active, the control panel becomes a pendant, limited to basic, manual controls. | - AC1107 cable, test frame to PC | $2,161.25 |
| Coefficient of Friction Measurement | EMF012-2 | Measure static and dynamic coefficients of friction, with user-defined sled weight. | G1086 coefficient of friction fixture | $741.00 |
| Spring Rate Measurement | EMF013-2 | Measure spring rate, with user-defined start and stop data collection triggers. | -Distance Measurement (EMF001-2) Suggested functions: -Distance Limits (EMF002-2) -Preload (EMF003-2) |
$741.00 |
Optional Function Packages
| Package | Part No. | Includes | Price |
| Distance Measurement | EMP001-2 | Distance Measurement (EMF001-2) Distance Limits (EMF002-2) Preload (EMF003-2) |
$3,016.25 |
| Speed Extension | EMP002-2 | High Speed Extension (EMF004-2) Low Speed Extension (EMF005-2) |
1,078.25 |
| Advanced Functionality | EMP003-2 | Cycling (EMF006-2) Break Detection (EMF007-2) Load Holding (EMF008-2) FollowMe® (EMF009-2) |
$2,612.50 |
| Complete Options | EMP-COMP-2 | All functions | $10,393 |
Included Items
The F755-EM, F755S-EM, F1505-EM, and F1505S-EM advanced test frames are shipped as shown at left, and includes the following accessories:
(1) Control panel, mounting bracket, and hardware
(1) Eye end kit for base
(2) Lock ring for eye end
(2) Spanner wrench
(1) Power cord
(1) Allen wrench set
Dimensions - in[mm]
| Model | A | B |
| F755-EM | 50.85 [1291.6] | 8.13 - 40.13 [206.4 - 1019.2] |
| F755S-EM | 33.39 [848.1] | 8.13 - 22.33 [206.4 - 567.1] |
| F1505-EM | 51.35 [1304.3] | 8.13 - 40.13 [206.4 - 1019.2] |
| F1505S-EM | 33.89 [860.9] | 8.13 - 22.33 [206.4 - 567.1] |
Related Products
- Available capacities of 100 lbF, 300 lbF, 500 lbF.
- Travel: 18 in [457 mm]
- A-la-carte platform, custom configuration as appropriate for the application and budget.
- Capacity: 100 & 350 lbF
- Basic force testing
- Force gauge based tester
- 225 lbF or 1,100 lbF capacity
- 2 in 1 Laptop Console
- Multistage and basic testing
- Height and distance measurement
- Deflection compensation
- Available capacities of 750 lbF, 1500 lbF
- Travel: 33 in or 55.35 in
- A-la-carte platform, custom configuration as appropriate for the application and budget.
- Capacity: 100 lbF
- Max Travel: 9 in
- Capacity: 200 lbF
- Max Travel: 13 in
- Column Extensions Available
- Capacity: 750 lbF
- Max travel: 6 inches
- Extended Column Available
- Capacity: 1000 lbF
- Max Travel: 3.5 in
- Extended Column Available
- Capacity: 100 lbF
- Max Travel: 6 in
- Extended Column Available
- Capacity: 1000 lbF
- Max Travel: 4 in
- Extended Column Available
- Available capacities of 1 kN, 2.5 kN, 5 kN
- Extensometers are available with this series.
- Material test system, software has inputs for material dimensions used in calculations of results such as strain, modulus, yield...
- Available capacities of 5 kN, 10 kN, 30 kN, 50 kN and 100 kN.
- Extensometers are available with this series.
- Material test system, software has inputs for material dimensions used in calculations of results such as strain, modulus, yield...
- Available capacities of 100 lbF, 300 lbF, 500 lbF.
- Save and recall test setups
- Multistage and basic testing
- Touchscreen or software
- Available capacities of 750 lbF, 1500 lbF.
- Save and recall test setups
- Multistage and basic testing
- Height measurement
- Deflection compensation
- Touchscreen or computer control
- Capacity: 30 lbF
- Max Travel: 1.5 in
- Compression only
- Capacity: 150 lbF
- Max Travel: 6 in
- Extended Column Available
- Capacity: 500 lbF
- Max Travel: 6 in
- Extended Column Available