Search Results

The 7i professional digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors. With exclusive Plug & Test™ technology, all calibration and configuration data is saved within the sensor’s smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors...

Save and recall sets of test parameters, such as speed, pass/fail limits, unit of measurement, etc. Maximum of 500 profiles may be stored.

Provides storage space for the TT01 tester, gripping jaws, AC adapter, and accessories. Optional accessory for Series TT01 Cap Torque Tester.

The ESM303 is discontinued. It has been replaced by Series F EasyMESUR test stands. The ESM303 motorized test stand is configurable for tension and compression measurement applications up to 300 lbF [1.5 kN]. A wide range of tests can be performed, including break testing, cycling, limit testing to a load or distance, load...

Designed for wire, rope, and yarn pull testing applications. Secures the free end of the sample via a bollard and vise. The capstan rollers generate a slow notch free stress relief to prevent the breakage of the specimen in the clamping area. Includes integrated eye end mounting, and requires an eye end...

For securing any Mark-10 indicator and Series R01 or R03 force sensor to a Mark-10 ESM303 force test stand. The kit consists of brackets and hardware. Indicator-test stand interface cable is not included. | Dimensions Force Gauge Mounting Bracket Load Cell Mounting Bracket

The G1023 Bottle Grip secures bottles, containers, and other items for cap opening and closing tests. Rubber edged gripping arms grip a wide range of sample shapes and sizes and can be individually positioned at angles of up to 180°. Specifications Torque Capacity: 100 lbFin [11.3 Nm] Load Force Capacity: 50...

Measures isometric hand grip force and strength increases in rehabilitation and physical therapy programs. Ideal for routine screening of grip strength and initial and ongoing evaluation of hand trauma and dysfunction. | Features and Specifications Measures from 0-200 lbs or 90 kgs Stores results in memory of up to 20 test...

Battery pack for Chatillon DFX2 series force gauges.

The G1105 Cork Pull fixture is designed to extract a cork stopper out of a bottle for pull force measurements, in conformance with ISO 9727. The G1105 accommodates up to 1.5 L bottles, and is compatible with both natural and synthetic stoppers. To use, load the bottle onto the spring loaded tray. The...

0/200 psi range 1/4" Male NPT connection size 4" dial size Stainless steel Removable bezel Laminated safety glass lens Adjustable pointer 316 stainless steel bourdon tube 304 stainless steel heavy duty bushed movement Welded connection Glycerin-filled

Remote load cell for Chatillon DFGS-R-ND and DFA-R-ND indicators. Hirose plug with 6 pin contact for connection to indicator. Cable Length: 9 ft New Part # Old Part # Capacity Thread Size REMOTE-10 NC000268-3 10 lbF [50 N] 1/4-28F REMOTE-50 NC000136-1 50 lbF [250 N] 1/4-28F REMOTE-100 NC000136-2 100 lbF [500 N] 1/4-28F REMOTE-200...

Series TT05 universal torque testers can be used for a range of applications up to 100 lbFin [11.5 Nm]. The stainless steel loading surface features a matrix of threaded holes, ideal for accommodating specialized fixtures and attachments. The testers' rugged design and simple, intuitive operation allow for use in laboratory and production...

NC000654 Mitutoyo Cable Use to interface an RS232 9-Pin output to a 10-Pin Mitutoyo Input. | Specifications Connector: 10-pin Mitutoyo Connector: 9-pin RS232 Cable Length: 5 ft

This digital manometer provides accurate measurements in 11 different units of measure and is capable of taking gauge and differential pressure. The R3002 features a large backlit LCD display, an integrated clock to keep track of measurements and the ability to record and revisit recorded data via the included software. | Features...

Battery charger for Chatillon DFG, DFGS, DFGS-R-XX, DGG, DGGS, DTG and DTGS series gauges. The original charger was made by a company that no longer is in business, so the new battery looks different from the original. Old Chatillon part number NC000096 New Chatillon part number SPK-DFGS-028A

TD5 crane scale carrying case.

Remote load cell adapter kit for the Chatillon TCM Motorized Test Stands. Includes mounting for an indicator DFS2-R-ND and SLC load cell.

Footswitch compatible with the Chatillon TCM-100, TCM-350, LTCM-100 and LTCM-500 Motorized Test Stands.

R02 Load Button Sensors for compressive loads of up to 10,000 lbF (50 kN). Compact and rugged, the R02 is ideal for heavy duty applications with space constraints. Compatible with Mark-10 indicators (sold separately) through unique Plug & Test™ technology. Accuracy: +/-0.15% of full scale + indicator Safe Overload: 150% of...

Battery pack for Chatillon DFT series gauge. New Chatillon part number SPK-DFT-067 Supplied with wire leads only. Requires splicing in connectors from old battery pack.

Stops and maintain a specified load for a specified period of time.

Double handle grip for Mark-10 Series E gauges. Series E gauges and attachments use Click-Lock Technology which prevents the attachments from rotating during use.

This fixture is used for testing the tack force of pressure-sensitive adhesives, in conformance with ASTM D6195 and related standards. A looped sample is loaded onto the test strip, and the closed end of the loop is secured by an upper grip (not included - suggested model: G1008). The test strip may...

Battery pack for Chatillon DFIS and CSD200 series gauges. Old Chatillon part number NC000792-1 New Chatillon part number SPK-DFIS-006

The JLW162-LCT is used in the texture analysis testing of lipstick. This fixture is used to measure the maximum compressive load before the lipstick will break. The impact area of the top fixture ensures that the lipstick is not cut, but is broken by pressing the lipstick down. Dimensions - mm

Force Sensor - Test Stand Mounting Kit For securing any Series R01 or R03 force sensor to any of the following Mark-10 force test stands:- ES10 / ES20- ES30- TSA750 / TSA750H- TSC1000 / TSC1000H- TSF / TSFH Included Items The kit contains brackets and screws with the following thread sizes: #10-32, 1/4-28, 5/16-18, 1/2-20.

Curved padded attachment for Mark-10 Series E gauges. Series E gauges and attachments use Click-Lock Technology which prevents the attachments from rotating during use.

The AC1036 calibration kit is designed for the field calibration of any Mark-10 Series TT01 torque tester or certain Mark-10 Series R53 torque sensors, as well as legacy Series CTA, STB, and STBA. | Includes The kit contains a complete set of attachments required to mount the tester to a bench, as well...

8 rubber-edged arms may be individually adjusted in 45° increments, for gripping square or odd shaped containers. Optional accessory for Series TT01 Cap Torque Tester.

The CHATILLON® STS Series torque sensors are full-bridge strain gauge sensors complete with 15-pin plug. These sensors are used exclusively with the Chatillon DFS II-R-ND Series digital indicator. The sensor’s torque values and sensitivity factors are stored in memory within the sensor plug. When connected to a DFS II-R-ND indicator, the...

The CHATILLON® SLC Series loadcells are full-bridge strain gauge sensors complete with 15-pin plug. These loadcells are used with the Chatillon DFS II-R-ND Series digital indicator. They may also be used with the Chatillon TCD Series digital force testers (recalibration with a TCD Series Console is required). Accuracy: ±0.25% of full...

This cable can be used to connect a DF Series force gauge to a computer using RS232 9-Pin. This is commonly used to output test results to a quality control software. | Specifications Connector to DF Series force gauge: Hirose Connector to PC: 9-pin RS232 Cable Length: 9 ft (NC000850-1) or 20 ft (NC000850-2) Replaces...

Increases the horizontal and vertical clearances for large samples. Accommodate up to a 20 in. [508 mm] wide sample, or ø21.5 in [ø546 mm] round sample. Three heights are available – 6, 12 and 24 in [150, 300, and 600 mm]. Base contains rows of T-slots, with available fixture mounting plates....

Capacity: 100 lbF Connection: #10-32 Part number: SPK-FMG-012B

One Gallon of SAE20 tester oil for use with ASHCROFT Dead Weight Testers and Pumps.

Pull / push sensor used in ergonomics testing, workplace safety testing, and general tension / compression. Threaded holes are supplied to accommodate various mounting configurations and attachments. Contact us to learn more about push/pull sensors | Features and Specifications Measure push and pull force Rugged aluminum housing Plug and play connection with M3i,...

Overall seal rebuild kit for Dead Weight Tester HL/HLG Buna N (standard material).

ENC0125 Gauge to LTCM Cable Interface the DF Series force gauge to a TCM or LTCM Motorized Tester | Specifications Connector: Hirose 12 Connector: 9-pin Female Length: 9 ft

SPK-FMG-USB, DF2 Series USB cable Interface DF2 Series to PC. | Specifications Connector: Micro USB Connector: USB

Column extension for increasing the vertical clearance space for tall samples. Multiple extensions may be stacked for very long samples. This does not increase travel. Model Description AC1094-1 6" column extension AC1094-2 12" column extension AC1094-3 24" column extension *Old part number: ESM303-001-1 / -2 / -3 Compatible with the following test...

Hook with clasp will fit any brand gauge with a 5/16-18 connection or by using a thread adapter to match your gauge to the 5/16-18 connection on this hook. Connection: 5/16-18 Capacity: 500 lbf

A date and time stamp is applied to each saved data point.

Chain with hook attachment for Mark-10 Series E gauges. Series E gauges and attachments use Click-Lock Technology which prevents the attachments from rotating during use. Chain Length: 5 feet

Cone attachments thread onto force gauges for puncture testing. Contact us to learn more about force gauge attachments Dimensions Model A ØB C G1026 0.5 in [12.7 mm] 0.25 in [6.4 mm] #10-32F G1033 1.00 in [25.4 mm] 0.50 in [12.7 mm] 5/16-18F

We have many options for puncture testing equipment. We can have fixtures built to fit your particular machine or we can provide a full system solution. The following information is required to quote a puncture fixture. Some of these questions may not be relevant depending on the type of puncture test. What...

The ForceTest software is an easy-to-use Windows based data analysis package for use with the Chatillon digital force gauges and torque gauges. Your test results are presented in a spreadsheet format, so you can analyze data and perform common mathematical and statistical calculations. Featuring a colorful and intuitive user interface this force...

The T-258 piston/cylinder assembly kit - Type T Buna N used with AMTEK/Mansfield Green Type "T" and Type "R" testers.

Chisel point attachments thread onto force gauges for puncture and compression testing. Model A ØB C G1025 0.5 [12.7] 0.25 [6.4] #10-32F G1032 1.00 [25.4] 0.50 [12.7] 5/16-18F Contact us to learn more about force gauge attachments

T-Slot Table compatible with the Chatillon TCM Motorized Test Stands.

Optional extended jaws for G1101 parallel jaw / vise-action grip. AC1071-1 Pair of jaws for G1101, 1.18" lengthAC1071-2 Pair of jaws for G1101, 1.97" lengthAC1071-3 Pair of jaws for G1101, 3.15" lengthAC1071-4 Pair of jaws for G1101, 3.94" length Documents Mark-10 Grips Catalog

Square padded attachment for Mark-10 Series E gauges. Series E gauges and attachments use Click-Lock Technology which prevents the attachments from rotating during use.