All Products

• Male-Type O, 12 mm male eye end with 6 mm pin
• 5/16-18M UNC thread

Puncture fixture to test slow rate penetration resistance of flexible barrier films and laminates according to ASTM-F1306.

• Maximal force, endurance and muscular symmetry measurement

• Base Plate assembly that comes with the CS225, CS1100, CS2-225 and CS2-1100.

• Determine a specific individual's sound exposure over time.
• Meets IEC 61672-1 Type 2 standards.

• 5/8" [15.9 mm] female eye end with 8 mm pin
• 1/2-20M Thread

• 5/8" [15.9 mm] female eye end with 8 mm pin
• 5/16-18M Thread

• 1.25" (31.7 mm) Male Eye End
• 1"-14 Male Thread

• 5/8" [15.9 mm] female eye end with 8 mm pin
• #10-32M Thread

• Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
• 1"-14 Male Thread

• Ripeness testing of fruits and vegetables
• Select from 5/16” (7.9 mm) and 7/16” (11.1 mm) dia.
• One flat end, one rounded end

• Force capacity: 5 kN (1,000 lbF)
• Jaw size (mm): 30 x 80
• Jaw types: Pyramid
• Opening: 0-100 mm (0-4 in)

• Compatible with Models F755, F755S, F1505, and F1505S test frames

Designed for use with Mark-10 Series F test frames.

• Load capacity: 10,000 lbf (50 kN)
• Body: Aluminum
• Lengths: 360 mm, 500 mm, 700 mm

• Roller diameter: 25.4 mm (1 in.)
• Roller width: 25.4 mm (1 in.)

Software for Lloyd Instruments test stands.

• 0.2% of FS accuracy
• Sampling rate: 30 kHz
• Outputs: USB / RS232, Mitutoyo, analog

• 0.1% of FS accuracy
• Sampling Rate: 30 kHz
• Outputs: USB, RS-232, Mitutoyo, Analog

• Available capacities of 750 lbF, 1500 lbF.
• Save and recall test setups
• Multistage and basic testing
• Height measurement
• Deflection compensation
• Touchscreen or computer control

• Capacity: 2,000 lbF [10kN]
• Opening: 0-0.3 in [0-8 mm]
• Jaw Width: 10 mm

• Available capacities of 100 lbF, 300 lbF, 500 lbF.
• Save and recall test setups
• Multistage and basic testing
• Touchscreen or software

• Dimensions: 200x200 mm
• Platen has concentric grooves to aid in centering of sample
• 6 mm Ø holes spaced at 20 mm

• Capacity: 34 lbF

• Force capacity: 5 kN (1,000 lbF)
• Jaw sizes (mm): 30 x 50
• Jaw types: Pyramid, Rubber, V-Jaws
• Opening: 0-28 mm

• Protective carrying case for ergonomic gauges and accessories.

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 1.25" (31.7 mm) male eye end

• 5/8" [15.8 mm] male eye end with 8 mm diameter pin
• M16X2-L40 external thread

• Compatible with Mark-10 Series E Force Gauge

• Force capacity: 2 kN (450 lbF)
• Opening: 0 – 10 mm
• Pyramid (serrated) jaws, pyramids 1.2 x 45°