All Accessories

• Where used: Force gauge series DFX, DFE, DFS, DFS-R-ND,
  DFX II, DFE II, DFS2, DFS2-R- ND

• Thread adapters for sizes #10-32, #4-40, 5/16-18, M4, M6, 1/2-20, 1/4-28.

• 5/8" [15.8 mm] male eye end with 8 mm pin
• Thread sizes of #10-32M, 5/16-18M, 1/2-20M, 1/4-28M.

• Capacities: 50, 200, 1200, 2000 lbF
• Jaws: Serrated or Rubber

• Where used: Force guage series CSD, DFI, DFIS, and DFM.

• Force capacity: 500 N (100 lbF)
• Jaw width (in): 1, 3, 5, 7
• Jaw type: Serrated
• Opening: 0-30 mm
• Weight: 0.14-0.41 kg (0.31-0.9 lbs)

• 5/8" [15.8 mm] male eye end with 8 mm pin
• Thread sizes of #10-32F, 5/16-18F, 1/2-20M.

• Battery for Mark-10 force gauges.

• One Gallon

• 5/8" [15.9 mm] female eye end with 8 mm pin
• Thread sizes of #10-32M, 5/16-18M, 1/2-20M.

• AC Adapters / chargers for Mark-10 force and torque gauges and indicators.

• SPK-FMG-143 Flat Circular Fixture
• Capacity: 500 lbf
• Connection: 5/16-18

• Adapter shafts for Chatillon Series DFE II, DFS II, DFE, DFS, DFIS force gauges.

Designed for use with Mark-10 Series F test frames.

• Force capacity: 500 lbF
• Hook threaded connection is 1/4-28M
• 1/4-28F to 5/16-18F adapter is included

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 1.25" (31.7 mm) male eye end

• Standards: ASTM C1161, ASTM D790
• Load Capacity: 500 lbf or 2,000 lbf options
• 10 mm diameter rollers are included

• Pull testing of tubes, cables, and odd sample shapes
• Force capacity: 200 lbF (1 kN)
• Adjustable cam spacing: 0-0.34 in (0-8.6 mm), depending on model 
• Crosscut Rollers

• Light weight aluminum compression plates with threaded connections #10-32 or 5/16-18. Available in 2" or 3".

• Capacity: 100 lbF

• For DFGS/DGG Gauges

In Stock

• Options for ESM303

• Swivel to adjust for proper sample alignment.
• Thread sizes #10-32 or 5/16-18.

• Tightens and loosens Mark-10 Eye Ends.

• Capacity: 100 lbF
• Connection: #10-32

• Force capacity: 1 kN (200 lbF)
• Jaw width: 31.8 mm (1.25 in)
• Jaw type: Pyramid
• Opening: 0-6 mm (0-0.25 in)
• Weight: 0.29 kg (0.75 lbs)

• Thread adapters for sizes #10-32, #4-40, 5/16-18, M4, M6, 1/2-20, 1/4-28, 1/4-20.

• Capacity: 30 lbF [150 N]
• Opening: 0.07 in [1.8 mm]

• Compatible with Chatillon Force Gauges

• 5/8" [15.8 mm] male eye end with 8 mm pin
• Male-Type O, 12 mm male eye end with 6 mm pin

• Force capacity: 1 kN (200 lbF)
• Jaw sizes (mm): 30 x 30
• Jaw type: Pyramid
• Opening: 0-30 mm
• Weight: 0.5 kg (1.0 lbs)

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 5/16-18M thread
• Mount grips that have a 5/8" eye end to most Mark-10 test stands.

• Compatible with Mark-10 Series E Force Gauge

• Testing small diameter round samples like pins, rods, wires
• Capacity: 30 lbf [200 N]

• Capacity: 200 lbf [1 kN]
• Available with opening of max 0.375 in [9.5 mm]