Search Results

Load cells ranging in capacity of 10 kN to 100 kN for Lloyd Instruments test systems.Overload protection of 150% of load cell capacity.The load cell accuracy is +/- 0.5% of Reading from 1% to 100% of the stated load cell range. Models x Resolution Model Description Capacity 01/2365 XLC-10K-A1 0.5% accuracy...

VG20 Pincher (Pincer) grips are ideal for removing components from a printed circuit board or securing small pull tabs when peeling a lid off of packaging. Suitable for small forces, pull off tests, fiber, filaments, adhesive bonds. Pyramid/Serrated grip faces prevent slippage during testing. The side action vice clamping allows for higher...

IMF001 Coefficient of friction module is compatible with the following Series F IntelliMESUR test stands: F105-IM(T) F305-IM(T) F505-IM(T) F755-IM(T) F1505-IM(T) Measure static and dynamic COF for a wide range of materials, per ASTM D1894 and other relevant standards. Specify the sled weight and configure data collection start and stop triggers. This module...

Hardness testing is essential in evaluating a material's properties, such as strength, ductility and wear resistance. The REED R9030 measures a wide range of materials including: cast steel, alloy steel, stainless steel, aluminum, bronze, copper and cast irons. This rebound hardness tester features a universal D impact device and is capable of displaying measurements...

Enhance your practice’s capabilities with the Evolution Pack. This bundle includes all Starter Pack tools plus the highly precise K-Force plates and a convenient duffle bag for portability. The K-Force plates allow for the advanced analysis of weight distribution, symmetry and strength, making this pack ideal for treating lower-limb pathologies such...

Long travel extensometer for Lloyd Instruments test stands. They will not work with other brands. This is for measuring sample materials like rubber, foam and other material that will have high-elongation. We provide two long travel extensometers for materials testing; the EX250Plus and the EX800Plus. Designed for the plastic and...

This Eye End Adapter will connect a grip or fixture with a 5/8" eye end to an M12x1.75 threaded connection. Eye end adapters ensure a secure and reliable mounting of grips. Specifications Connection: 5/8" (15.8 mm) male eye end, 8 mm pin Connection: M12x1.75 female thread Load Capacity: 20 kN Material: Steel, nickel-plated Included...

Horizontal/wall mounting kit for Mark-10 TSA750 or TSC1000 manual test stands. Includes a pair of mounting legs for adapting the test stand to a bench, instead of the base.

4 Point bending fixture Conforming to ASTM D7249 and ASTM C393. These flexural fixtures are used to test sandwich construction panels for measuring force displacement behavior, ultimate stress and modulus. Features Load capacity: 10,000 lbf (50 kN) Body: Aluminum Temperature range: 0 … +70°C Coupling: 5/8" (15.9 mm) or 1.25" (318 mm)...

Column extension used on TSTM-DC Torque Test Stand. Price is based on extension being added at time of purchase of the torque test stand. Model Length added to standard column SP-2736-12 Column extension, 12 in. / 305 mm SP-2736-24 Column extension, 24 in. / 610 mm SP-2736-42 Column extension, 42 in. / 1065...

The K-Grip Accessory can be attached to KINVENT’s best-in-class hand dynamometer, the K-Grip, to more easily accommodate a greater variety of hand sizes. The attachment connects to the sensor magnetically and can be removed by simply pulling it straight forward with about 1 kg (2 lbs.) of force. Please note the K-Grip...

Scissor grips are self-tightening and self-aligning grips with a capacity of 20 kN. The initial clamping force is provided by spring tension. The ratio of clamping force to tensile force changes according to the opening width. The larger the opening width the stronger the grips tightens the specimen. The jaws tighten...

This swivel hook threads onto a force gauge and can be used in pull testing springs or other samples with a loop end. The swivel action of the hook keeps the sample pulling in proper alignment. Capacity: 100 lbF Connection: #10-32 F

Full package system for high capacity wire crimp pull testing up to 750 lbF. This system includes all grips and accessories necessary for testing wire 10 AWG to 1 AWG. Measures pull-off forces of up to 750 lbF [3.4 kN] for wire and crimp terminations. Included Items F755S-EM Series F EasyMESUR Test...

Accommodates any Mark-10 indicators or Series TT03 torque gauge (indicator portion). Features an angle adjustment to optimize the viewing angle. Note: For indicator positioning only. It should not be used to support a force gauge or torque sensor in a load-bearing application. Replaces Model AC1008 Contact us to learn more about digital...

The drag pointer is part of the standard equipment of all Macro-Line Scales. It is a plastic ring which easily clicks over the metal tube. Before measuring move the drag pointer to zero. With increasing load the drag pointer is moved down by the marker and will remain in position of...

Tension Testing Scissor Grips 5kN, SG11-5, are self-tightening and self-aligning grips. The initial clamping force is provided by spring tension. The larger the opening width the stronger the grips tightens the specimen. The jaws automatically tighten during force application. Scissor Grips are recommended for use with materials that have varying...

Horizontal / wall mounting kit, includes a set of mounting legs that attach to the test stand column in place of the base. Compatible with TSF manual force test stand and TST manual torque test stands.

Communication cable from the TCM100 or TCM350 series test stands to a DFS3 or DFE3 series force gauge.

Suitable for both tension and compression applications, the Mark-10 Series R08 Tension / Compression Force Sensors MR08 have a capacities of up to 10,000 lbF (50 kN). With threaded rods on both ends, these sensors offer versatile mounting options.Compatible with Mark-10 indicators (sold separately) M3i, M5i, M7i, through unique Plug & Test®...

This R8070SD has triple range measurement and features Data hold, Max/Min functions, and an easy-to-read backlit LCD display. Using a SD card (max 16GB), a user can manually record up to 99 readings or automatically by selecting a desired sampling rate from 1 to 3600 seconds. Quickly generate an Excel file with raw data,...

Load cells ranging in capacity of 5 N to 100 kN. These sensors are used with the LD Series test stands. Overload protection of 150% of load cell capacity.The load cell accuracy is +/- 0.5%. Models x Resolution Model Description Capacity 01/3988 OLC-2500-A1 0.5% accuracy 2500N LR loadcell 2500 N 01/3989 OLC-5000-A1 0.5% accuracy...

Includes #10-32, 1/4-28, and 1/2-20 thread bolts, spacers, and washer for mounting load cells to an ESM1500.

KINVENT K-Bubble Dynamometer is an innovative device for objectively measuring patients’ force production with any body part. This dynamometer can detect pressure variations and converts them into accurate force readings, allowing for precise testing of adductors or the cervical spine. All necessary accessories are included. K-Bubble is one of 8 Kinvent...

This swivel hook threads onto a force gauge and can be used in pull testing springs or other samples with a loop end. The swivel action of the hook keeps the sample pulling in proper alignment. Capacity: 50 lbF Connection: #10-32 F

Optional functions for Mark-10 F1505-EM and F755-EM motorized test frames. Any of the below functions may be purchased at time of order or may be enabled in the field at a later date through a code activation process. A complete options package (EMP-COMP-2) is also available, including all of the below features at...

Connect common strain gage-based load cells, force sensors, and torque sensors to Models M7I, M5I, and M3I indicators and Series F test frames with these user-configurable adapters.Sensor capacity and resolution may be configured via an included software utility, which includes a library of common force capacities from 0.12 to 750,000 lbF (0.5...

Allows the G1109 Peel Fixture to mount to a Mark-10 ESM303.

Female to Female Part Number Female Thread 1 Female Thread 2 Load Capacity TA:#10-32F,#10-32F #10-32 #10-32 225lbf TA:#10-32F,1/4-20F #10-32 1/4in-20 225lbf TA:#10-32F,M6F #10-32 M6 225lbf TA:1/4-20F,5/16-18F 1/4in-20 5/16in-18 550lbf [2.5kN] TA:1/4-28F,5/16-18F 1/4in-28 5/16in-18 550lbf [2.5kN] TA:5/16-18F,5/16-18F 5/16in-18 5/16in-18 550lbf [2.5kN] TA:5/16-18F,1/2-20F 5/16in-18 1/2in-20 550lbf [2.5kN] Male to Male Part Number Male Thread...

Spare retainer nut for a JLW-Canners canning pressure gauge. Contact us to learn more about canners gauges

The Communicator II is an optional hand-held remote that can define the function and manage the operation of one or more EDXtreme dynamometers using wired or radio technologies. Through the programmable SOFTKEY interface, one or more Communicators can monitor multiple dynamometers within the same airspace. In multiple-link lifting arrays, the...

Single-handle grips used for mounting a Mark-10 Series 2 and Series 3 Force Gauge in various applications, such as ergonomics testing, job task analysis, and muscle strength evaluation. Handles are included with Mark-10 ergonomics testing kits.

Provides storage space for the WT3-201M tester, optional ring terminal fixture, AC adapter, USB cable, and accessories.

AC1080 adapter allows the G1023 Universal Grip or G1058 Bottle Grip to mount to the G1109 Peel Fixture. AC1080 included Items Documents G1109 Data Sheet G1109 AC1078 AC1079 Manual

This COF fixture is used for testing friction on sheet, film and paper products. Used to test static and kinetic coefficient of friction to ASTM D1894 and ISO 8295:2004 standards. The fixture consists of a 200 g sled, horizontal table with low friction pulley, wire and clamp. The wire attaches to the...

These load cells are replacement sensors for Chatillon force gauge Series DFX and DFX II. These parts are used to replace damaged load cells in these force gauges. Models Load Cell Part No. Sensor Capacity Where Used DFX DFX II SPK-DFX-155-010 10 lbF [50 N} DFX-010 DFX2-010 SPK-DFX-155-050 50 lbf...

The Adaptation set with eye-bolt fits all Macro-Line Scales (replacing the standard hook). Please observe the detailed information of instruction for exchange.Examples of useFor traction ropes that may not unhook.A snap-hook (not included) attached to the eye-bolt will provide a flexible safe fixing. Thread: M8 Outer eye Ø: 20 mm Inner...

Displays up to 1" of displacement with resolution of 0.001". Brackets for mounting to a Mark-10 ES10 or ES20 manual test stand is included.

NIST calibration certificate with data for new product purchases. Force gauges Torque gauges Cap torque testers Load cells Torque sensors Learn More About Our Calibration Services

Serial cable, gauge to RS-232, DB-9. The length of the cable is 6 ft. Compatible Instruments Force gauges: Series 7, 5, 4 Digital Indicators: 7i, 5i Torque gauges:, TT01, TT02, TT05, Wire pull tester: WT3-201(M)

These load cells are replacement sensors for Chatillon force gauge Series DFGS, DGGS and DFA. These parts are used to replace damaged load cells in these force gauges. Models New Part No. Old Part No. Capacity Where Used SPK-DGGS-025A NC001846 250 gram [0.5 lbF] DGGS DFA-250G SPK-DFGS-025B NC001846-2 2 lbF [10...

A multifunctional instrument for weighing, measuring traction/tension. Always ready for use, doesn't need batteries. Precise, ultra-light and handy Spring Scale with transparent tube and long, clear double display. Patented tare, zero-adjustment and spring suspension technology. Free turning inner tube which neither influences reading nor tare. Tare screw with incremental rotation, to...

Professional grade, injection molded hard plastic case with customizable foam inserts. Features and Specifications Customizable foam interior O-ring creates watertight seal Pressure equalization valve Double latch & lock system Internal dimensions: 12 x 9.6 x 5.4" ( 305 x 244 x 136mm) External dimensions: 13 x 12 x 5.8" (330 x 305 x 148mm) Weight: 4.55lbs (2.1kg) UPC: 800837001542...

Interface cable for communication between Mark-10 force gauges and test stands. 32" retracted length. Compatible Instruments Force Gauges: Series 7, 5, 4 Test Stands: ESM301(L), ESMH-DC, TSFM500(H)-DC, ESMH-DC

This sound level meter meets ANSI, and IEC Type 2 standards and features dual range measurement, fast & slow time weighting, data/max hold functions and a tripod mount for long-term monitoring. Features High accuracy of ±1.4 dB meets Type 2 standards Dual range measurement (High and Low) A & C frequency weighting Fast & Slow...

Compact 6-in-1 environmental meter measures air velocity, air temperature, ambient temperature, relative humidity, light and contact temperature. The LM-8000 features Data Hold, Minimum/Max functions and has been designed for one handed operation. | Features Measures air velocity/temperature, ambient temperature, relative humidity, contact temperature and light Easy to operate, designed for one...

Carrying case for TT02 Torque Tool Tester. Hard plastic carrying case with cushioned insert allows for safe storage and easy transportation. Provides storage space for the TT02 tester, ST001 mounting bracket, AC adapter, and accessories.

Includes a matrix of #10-32 threaded holes and 5/16-18 center hole, and 5/16-18M to #10-32F adapter.

SPK-TLC-001 5/8 in Eye-End (Male) Load Capacity: 110 lbf Thread: #10-32F Material: Aluminum Includes Grip Pin & 2 Locking Washers SPK-TLC-002 5/8 in Eye-End (Male) Load Capacity: 500 lbf Thread: #1/4-28M Material: Stainless Steel Includes Grip Pin & 2 Locking Washers SPK-TLC-003 5/8 in Eye-End (Male) Load Capacity: 2,200 lbf Thread: #1/2-20M...

Communicator II to EDXtreme cable (LEMO to LEMO, RS-485, 50-ft cable). If EDXtreme is not equipped with radio, then this cable is required to communicate between the EDXtreme and Communicator II.

USB cable, type micro B to A. The length of the cable is 6 ft. Compatible Instruments Communication from the following instruments to a PC. Force gauges: Series 7, 5, 4, 3 Digital indicators: 7i, 5i, 3i Torque gauges: TT01, TT02, TT03, TT05 Wire pull tester: WT3-201(M)

The G1111 secures textile webbing, tape, and braided materials typically used in construction, shipping, and other industrial uses. The grip is ideal for conformance to ASTM D6775 and related standards, accommodating a wide range of sample widths and forces up to 2,000 lbF (10 kN).Includes integrated eye end mounting, and requires...