All Products

Flip cap pull testing for caps. Engages the tab on a flip cap for pull-off force measurements.

• Capacity: 500 N [112.5 lbf]
• Connection: #10-32F thread

• DFS2, DFE2 Battery Pack

• DFS & DFE Battery Pack

• Includes: M5 Force Gauge, Double Handles, In-line Cradle with Eye Hook, Hook with Latch, Curved Padded Attachment, Charger, Carrying Case, NIST Cert

• Compatible with TCD110, TCD225, TCD1100 Test Stands

• Force capacity: 500 N (100 lbF)
• Jaw width (in): 1, 3, 5, 7
• Jaw type: Serrated
• Opening: 0-30 mm
• Weight: 0.14-0.41 kg (0.31-0.9 lbs)

• Includes: M2 Force Gauge, Double Handles, Padded Flat Attachment, Hook, Charger, Carrying Case, NIST Cert

• Rectangular Small Flat

• Rectangular Flat Compression Fixture
• 5/16-18 Thread

• SPK-FMG-143 Flat Circular Fixture
• Capacity: 500 lbf
• Connection: 5/16-18

• 5/16-18 Thread

• 5/16-18 Thread

• Capacity: 500 lbF [2,500 N]

• 0-30 lb

• 0-60 lb

• Capacities: 0.5 to 1,000 lbF
• Compatible with Chatillon Test Stands: CS2+, CS2, CS

• 4" Dial Size, 0-200 PSI

• 0/10 psi Range
• 4" Dial Size
• 1/4" Male NPT Connection Size

• 0/200 psi range
• 1/4" Male NPT connection size
• 4" dial size

• Calibration (Min-Max): 0 - 30 PSI
• Face Size: 2 IN
• Fitting Size: 1/8 IN

• TD5 Scale Accessory

• For AMETEK/M&G Dead Weight Tester

• One Gallon

• Steel compression plate 
• Diameter of 2.2 or 3.78 inch
• 5/8" eye end connection.

• Capacity: 2,000 lbF [9 kN]
• Max sample size: Ø0.39 in [10 mm]

• Pull testing of wire, rope, and yarn
• Force capacity: 1,000 lbF (5 kN)
• Max. sample size: Ø0.21 in (5.3 mm)
• Weight: 1.8 lbs (0.8 kg)
• Connection: Integrated 5/8" Eye End

• Capacity: 200 lbF [1 kN]
• Max. sample size: Ø0.26 in (6.6 mm)

• Capacity: 50 lbF [250 N]
• Max. sample size: Ø0.10 in (2.5 mm)

• Capacity: 2,000 lbF
• Groove size range: 0.08" to 0.46"