Search Results

IMF001 Coefficient of friction module is compatible with the following Series F IntelliMESUR test stands: F105-IM(T) F305-IM(T) F505-IM(T) F755-IM(T) F1505-IM(T) Measure static and dynamic COF for a wide range of materials, per ASTM D1894 and other relevant standards. Specify the sled weight and configure data collection start and stop triggers. This module...

The TST Torque Measurement Test Stand is ideal for a wide variety of torque testing applications up to 100 lbFin, including closure torque testing, fastener torque testing, and more. Smooth hand wheel operation ensures ease of use and a lever-operated slider with travel stops makes engaging and disengaging samples quick and efficient....

Adjustable travel stop for Mark-10 manual test stands ES30, ES20 and ES10.

Suitable for both tension and compression applications, the Mark-10 Series R08 Tension / Compression Force Sensors MR08 have a capacities of up to 10,000 lbF (50 kN). With threaded rods on both ends, these sensors offer versatile mounting options.Compatible with Mark-10 indicators (sold separately) M3i, M5i, M7i, through unique Plug & Test®...

AC1046-2 eye end socket adapter kit converts threaded connections on grips and fixtures to an eye end connection. They have 5/8" [15.8 mm] diameter which is commonly used with test frames, load cells, grips, and force gauges. Eye end adapters provide a commonly accepted industry method of attaching grips and fixtures...

Scissor grips are self-tightening and self-aligning grips with a capacity of 20 kN. The initial clamping force is provided by spring tension. The ratio of clamping force to tensile force changes according to the opening width. The larger the opening width the stronger the grips tightens the specimen. The jaws tighten...

Horizontal / wall mounting kit, includes a set of mounting legs that attach to the test stand column in place of the base. Compatible with TSF manual force test stand and TST manual torque test stands.

Tension Testing Scissor Grips 5kN, SG11-5, are self-tightening and self-aligning grips. The initial clamping force is provided by spring tension. The larger the opening width the stronger the grips tightens the specimen. The jaws automatically tighten during force application. Scissor Grips are recommended for use with materials that have varying...

The UXU100 USB Communication Adapter links the EasyMESUR® control panel to a computer for data retrieval through third-party SPC software. Data can be sent from the control panel through the Data button or requested by the software through serial commands. Compatible Mark-10 Test Stands F105-EM, F305-EM, F505-EM, F505H-EM F755-EM, F1505-EM, F755S-EM,...

Features a matrix of #10-32 threaded holes and a 5/16-18 center hole, ideal for custom fixture mounting. This base plate is compatible with F105/F305/F505 test stands and AC1095 column extensions.

The LSPlus materials testing machines from Lloyd Instruments are easy-to-use universal testing machines ideal for materials testing up to 5 kN (1124 lbf). The machines use high-accuracy interchangeable YLC Series load cells for tension, compression and cycling through zero-force measurements, and they have an accuracy of ±0.5% from 1% to 100%...

Set of rubber jaws for gripping square or odd shaped containers. Optional accessory for Series TT01 Cap Torque Tester.

Bench mounting bracket for TT02 Torque Tool Tester. Mounts the TT02 to a bench for horizontal or other orientations.

Provides storage space for the TT01 tester, gripping jaws, AC adapter, and accessories. Optional accessory for Series TT01 Cap Torque Tester.

Connect common strain gage-based load cells, force sensors, and torque sensors to Models M7I, M5I, and M3I indicators and Series F test frames with these user-configurable adapters.Sensor capacity and resolution may be configured via an included software utility, which includes a library of common force capacities from 0.12 to 750,000 lbF (0.5...

MR06-200 wire crimp pull sensor is a hand operated tester for measuring wire crimp pull-off forces. The ergonomic handles and convenient tensioning mechanism make field measurements a breeze for applications up to 200 lbF (1,000 N). Squeeze the handles together to increase tension on the sample until a break occurs. The peak force...

R04 Miniature Force Sensor is a compact force measurement sensor for tensile and compressive loads in applications with limited space. The Series R04 is available in capacities from 0.25 to 100 lbF (1 to 500 N). Every capacity has the same miniature dimensions. The sensors feature outstanding mechanical overload protection and...

Additional rollers for Mark-10 bend fixtures G1095, G1096, G1097. 10 mm diameter rollers are included with G1095, G1096, and G1097. AC1067 Rollers for bend fixtures, 1 mm dia., set of 4 AC1067-1 Rollers for bend fixtures, 2 mm dia., set of 4 AC1067-2 Rollers for bend fixtures, 5 mm dia., set of 4 AC1067-3 Additional set...

The TA1 texture analyzer is excellent at testing compression, shear, extrusion, puncture, hardness forces, etc. within food testing, pet food testing, cosmetics testing and pharmaceuticals testing.The texture analyzer has a large working area of 180 mm (7.08 in) throat depth for larger specimens, and a wide range of work tables for flexibility....

AC1046 Series eye end socket adapter kits convert threaded connections on grips and fixtures to and eye end connection. mount to force gauge threaded connections. They have 5/8" [15.8 mm] diameter which is commonly used with test frames, load cells, grips, and force gauges. Eye end adapters provide a commonly accepted...

Allows the G1109 Peel Fixture to mount to a Mark-10 ESM303.

T-Slot table for mounting on test stands. This fixture features a 5/8" integrated eye end, the standard eye end size for Lloyd Instruments, Chatillon, and Mark-10 products. Furthermore, Adapters are available to mount these compression plates on any brand of test stand, load cell, or force gauge. Included Items (1) T-Slot...

The PCE Hydraulic Force Gauges are available in 1 kN, 2.5 kN, 10 kN, and 25 kN capacities. Max force readings are held by the integrated drag pointer. This hydraulic load cell has a 27 mm ring opening designed for applications with guide rails, shafts and also bolts of, for example, a hydraulic...

The PCE Hydraulic Force Gauge with hose is available in 1 kN, 2.5 kN, 10 kN, and 25 kN capacities. Max force readings are held by the integrated drag pointer. This hydraulic load cell has a 27 mm ring opening designed for applications with guide rails, shafts and also bolts of, for...

Spanner wrench for loosening and tightening locking rings on eye ends used on Lloyd Instruments and Chatillon test stands and load cells. Model Diameter SPT/0243/00 70 mm SPT/0244/00 42 mm

Adapts other Mark-10 grips via 5/16-18F thread. Includes male/male stud with jam nuts. Compatible with Mark-10 Series E gauges.

The belt tension meter is an optically measuring maintenance tool for determining the belt tension force. This belt tension meter consists of a display device and a sensor head attached on a semi-flexible gooseneck. The advantage of the gooseneck is that the sensor head can be flexibly positioned. Due to the mobility of...

VG20 Pincher (Pincer) grips are ideal for removing components from a printed circuit board or securing small pull tabs when peeling a lid off of packaging. Suitable for small forces, pull off tests, fiber, filaments, adhesive bonds. Pyramid/Serrated grip faces prevent slippage during testing. The side action vice clamping allows for higher...

Control panel tabletop mounting kit (AC1085) for applications requiring remote use of the control panel. Features an adjustable viewing angle and a base with thru holes for bench mounting. Compatible with: F105-EM, F305-EM, F505-EM, F505H-EM EasyMESUR test frames F755-EM, F755S-EM, F1505-EM, F1505S-EM EasyMESUR test frames

Optional function for IntelliMESUR Test Frames: F105-IM(T), F305-IM(T), F505-IM(T) F755-IM(T), F1505-IM(T) Characterize and analyze the behavior of materials, components, and assemblies with a suite of materials testing calculations, including: Stress and strain Tensile strength Shear strength Young’s modulus (auto-calculate or manually draw) Yield point Offset yield (user-specified percentage) Rupture Percent elongation...

Fixture used for testing corrugated board, conforms to ASTM-C364 – Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions. Specifications Force capacity: 50 kN Material: Steel, nickel-plated Compression plates are not included Includes upper and lower fixture

Engineered for precision and ease of use, the Fiber & Filament Lightweight Spring Loaded Grip is ideal for tensile testing of delicate, fine-diameter materials such as optical fibers, wire, and filament. Fits standard 5/8" eye ends—ready to use with Lloyd, Chatillon, and Mark-10 systems. Need the full setup? We carry...

3 point bend fixture for flexural testing. This fixture is commonly used for measuring deflection, flexural modulus, flexural strength and flexural yield strength. This grip is designed to mount on a standard 5/8" eye end. This connection type is commonly used on Lloyd Instruments, Chatillon, and Mark-10 equipment. We also sell these...

Communication cable from the TCM100 or TCM350 series test stands to a DFS2 or DFE2 series force gauge.

Horizontal/wall mounting kit for Mark-10 TSA750 or TSC1000 manual test stands. Includes a pair of mounting legs for adapting the test stand to a bench, instead of the base.

The AFM external force sensor can be utilized alongside our DFS3 Digital Force Gauge to provide maximum flexibility when performing various tests across the board without needing to frequently adjust parameters.All settings can be programmed ahead of time, which increases efficiency in testing that takes place multiple days. Up to...

The LD Series touchscreen is designed for users who are looking for an easy, reliable, digital force testing solution. The touchscreen comes preloaded with software. The software on this touchscreen is for force and distance measurements. If calculated values like modulus, strain, strength, and yield are needed; Nexygen Plus 4.1...

Thread adapter with a female 10M thread to male 5/16-18 thread. This adapter can be used to mount Chatillon and Mark-10 ergonomic attachments to a Shimpo force gauge. Equivalent to Shimpo FG-M10TJ5/16

90 degree peel test fixture for testing identification cards, credit cards, and loyalty cards. Fixtures designed to standards ISO/IEC 10373-1 and ISO/IEC 7810. Specifications 6 rollers x 10 mm Ø, 1 mm distance between rollers, V2A stainless steel Force capacity: 2 kN Connection fitting: 5/8" female eye end (15.9 mm) Adapters for other sizes...

Allows the G1109 Peel Fixture to mount to the following test stands: Mark-10, Series F EasyMESUR F755-EM, F1505-EM High Capacity Motorized Test Stands, Mark-10, Series F IntelliMESUR F755-IM(T), F1505-IM(T) High Capacity Advanced Test Frames,

Column extension used on TSTM-DC Torque Test Stand. Price is based on extension being added at time of purchase of the torque test stand. Model Length added to standard column SP-2736-12 Column extension, 12 in. / 305 mm SP-2736-24 Column extension, 24 in. / 610 mm SP-2736-42 Column extension, 42 in. / 1065...

This swivel hook threads onto a force gauge and can be used in pull testing springs or other samples with a loop end. The swivel action of the hook keeps the sample pulling in proper alignment. Capacity: 50 lbF Connection: #10-32 F

Load cells ranging in capacity of 10 kN to 100 kN for Lloyd Instruments test systems.Overload protection of 150% of load cell capacity.The load cell accuracy is +/- 0.5% of Reading from 1% to 100% of the stated load cell range. Models x Resolution Model Description Capacity 01/2365 XLC-10K-A1 0.5% accuracy...

Load cells ranging in capacity of 5 N to 100 kN. These sensors are used with the LD Series test stands. Overload protection of 150% of load cell capacity.The load cell accuracy is +/- 0.5%. Models x Resolution Model Description Capacity 01/3988 OLC-2500-A1 0.5% accuracy 2500N LR loadcell 2500 N 01/3989 OLC-5000-A1 0.5% accuracy...

Compression plates ranging from 56mm to 246mm with a maximum load capacity of 50 kN feature concentric rings for precise sample placement. Adapters are available to mount platens to almost any test stand. Load Capacity: 50 kN (4,500 lbF) Material: Hardened steel 58 HRC, nickel-plated Connection (Coupling): 1.25" (31.8 mm) Female...

Fixture used for determining bulk crush strength testing catalyst particles 0.8 mm to 4.8 mm in diameter. Fixture used in testing to ASTM D7084. This bulk crush strength fixture is designed for determining the compressive strength of catalyst particles in accordance with ASTM D7084. The fixture supports testing of spherical...

Enables the installation of a Series F test stand upside-down to permit the calibration of a force sensor with deadweights in either tension or compression.Compatible with Series FS05 force sensors, Series FS06 sensors, and models F105, F305, and F505 test frames (EasyMESUR and IntelliMESUR).This fixture is not needed for models F755(S) and F1505(S),...

Floating roller peel fixture with adjustable height of second roller to adjust angle from 0° to 45°. Used in testing resistance of adhesive bonds. Available with 20 mm or 25 mm diameter rollers; the smaller roller has more space between the first and second roller. See the dimensions further down...

This is an easy-to-use muscle tester/digital handheld dynamometer platform providing muscle and spinal range of motion protocols. Patient tracking, analysis, and comparison statistics are collected and narrative and graphic reports can be generated. Compatible with: MicroFET2 Dynamometer MicroFET3 Dynamometer and Inclinometer

This digital force gauge program is designed for research and education applications. The program simultaneously captures raw test data while displaying a real-time graph of the data. The data is saved in comma-separated values (CSV) format and can be opened in most spreadsheet programs for further analysis. Compatible with MicroFET2 Dynamometer...

The K-Myo, a non-invasive EMG sensor, facilitates rehabilitation by targeting weakened muscles, monitoring muscle activation and tracking patient progress. Now available in a two pack, the K-Myo Duo allows practitioners to gather and review data related to muscle distribution, rebuilding, imbalance, strength, and activation for more than one muscle group, simultaneously. Contact...

The K-Force Plates Frame is an accessory that increases the functionality of KINVENT’s lightweight K-Force Plates. In addition to stabilizing the plates, the frame extends the surface area, so patients can complete jump tests more safely. The versatile frame allows users to adjust the distance between the plates (at 5 cm...