Search Results

Revolutionize your practice with the Ultimate Solution Pack. The all-in-one solution for elite physiotherapy practices, the Ultimate Solution Pack contains every tool in the KINVENT lineup. The pack is the most comprehensive solution for rehabilitation, performance optimization and patient satisfaction. In addition to KINVENT’s best-in-class biofeedback tools, the Ultimate Solution...

Provide cutting-edge care with the Advanced Pack. The Advanced Pack builds on the Evolution Pack with the addition of the K-Myo, which enables detailed muscle activity monitoring. This pack is perfect for addressing neuromuscular conditions, such as peripheral nerve injuries, post-stroke muscle re-education, and spasticity management. With real-time biofeedback and...

The KINVENT K-PUSH is a lightweight and versatile hand-held strength testing dynamometer. It offers convenience and accuracy to quickly assess the maximum and isometric strength of over 40 muscular groups with its range of accessories, allowing you to perform strength tests anywhere, anytime. K-PUSH is one of 8 Kinvent devices that communicates...

Spare rubber gasket for JLW-Canners canning pressure gauge. Contact us to learn more about canners vacuum gauges

Spare puncture probe/needle for JLW-Canners canning pressure gauge. Contact us to learn more about canners vacuum gauges

Floating roller peel test fixture for testing resistance of adhesive bonds according to DIN 53289, EN 1464, ISO 4578. The roller diameter is 25 mm with a 30 mm width as required by the standards. The floating roller peel test determines the relative peel strength of adhesive bonds between one rigid...

Peel Test Fixture for testing resistance of adhesive bonds according to ASTM D3167. The floating roller peel test determines the relative peel strength of adhesive bonds between one rigid adherend and one flexible adherend. Specifications Load capacity: 10 kN Roller diameter: 25.4 mm (1 in.) Roller width: 25.4 mm (1...

Column extension used on TSB100, TSA750 / TSA750H and TSC1000 / TSC1000H. Price is based on extension being added at time of purchase of the manual test stand. Model Length added to standard column SP-2734-12 Column extension, 12 in. / 305 mm SP-2734-24 Column extension, 24 in. / 610 mm SP-2734-42 Column extension, 42...

These load cells are replacement sensors for Chatillon force gauge Series DFX and DFX II. These parts are used to replace damaged load cells in these force gauges. Models Load Cell Part No. Sensor Capacity Where Used DFX DFX II SPK-DFX-155-010 10 lbF [50 N} DFX-010 DFX2-010 SPK-DFX-155-050 50 lbf...

Includes #10-32, 1/4-28, and 1/2-20 thread bolts, spacers, and washer for mounting load cells to an ESM1500.

Cable, travel display to Mitutoyo SPC. The length of the cable is 6 ft. If outputting travel from a Mark-10 manual test stand display to a PC, the following cables will be needed. Travel display (Mitutoyo) <=> AC1105 cable, Mitutoyo <=> MU100 Compatible Instruments Mitutoyo travel display mounted to ES30, TSA750(H), TSB100, TSC1000(H),...

KINVENT K-GRIP Hand Dynamometer provides an efficient way to assess and train grip strength, perfect for neurological rehabilitation, tracking fatigue in athletes, and countering the effects of aging. All necessary accessories are included. K-Grip is one of 8 Kinvent devices that communicates via Bluetooth to a user-friendly mobile app, Kinvent App. This...

The KINVENT App is the heart of the KINVENT ecosystem. All ten KINVENT sensors send data to the app in real time via Bluetooth – and give physical therapists, strength and conditioning coaches and athletic trainers the insight they need to drive improved health and performance outcomes. Within the app,...

The AC1078 Adjustable Angle Pulley Adapter is designed to be used with the G1109 Peel Test Fixture. This adapter uses an adjustable pulley to set the angle of pull, from 0° to 90°, while the working table remains horizontal. The horizontal orientation is suited for seal testing of filled containers,...

The AC1079 is an adjustable-angle mount that tilts the G1109 Peel fixture up to ±30°. AC1079 included Items G1109 + AC1079 Dimensions in Documents G1109 Data Sheet G1109 AC1078 AC1079 Manual

Self-aligning compression plates are designed to adjust to angular displacement of the material being tested. These plates can also be set to a fixed position by tightening the nuts. Self-aligning platens are designed for compression testing materials with uneven surfaces, variable load distribution, and angular misalignment between surfaces. These platens adapt...

SPK-FMG-143 Flat Circular Fixture Capacity: 500 lbf Connection: 5/16-18

SPK-FMG-145 Rectangular Flat Compression Fixture Capacity: 500 lbf Connection: 5/16-18

The Dillon EDXtreme Digital Dynamometer offers sophisticated communication and user-defined functions to be configured for efficient multi-tasking operations. Monitor multiple stress points from a single location and make sure your weighing operations are always accurate. Radio or hardwired options available with the EDXtreme offer the convenience and safety of remote operation....

Looped Cable attachment for Mark-10 Series E gauges. Series E gauges and attachments use Click-Lock Technology which prevents the attachments from rotating during use.

SPK-FMG-146 Small Rectangular Flat Compression Fixture Capacity: 500 lbf Connection: 5/16-18

The USG (U.S. Gauge) Pressure Gauge 164419 is a 2-inch dial pressure gauge designed to measure pressures up to 100 psi. Dial size: 2" (50 mm) Pressure Range: 100PSI Accuracy: +/- 3-2-3% of Span Connection size: 1/8" NPT CBM Mounting location: Center back mount SKU: 164419 Model: 844 (P844UK) Warranty: 1 year...

Stainless steel test plate designed for 180° peel testing of pressure-sensitive tape per ASTM D3330 Method A. Combine with a vice grip to hold the plate in place in a universal testing machine. Need the full setup? We carry test stands, load cells, and force gauges. Specifications Size: 125 x 50 x 2 mm (LxWxT)...

Hardness testing is essential in evaluating a material's properties, such as strength, ductility and wear resistance. The REED R9030 measures a wide range of materials including: cast steel, alloy steel, stainless steel, aluminum, bronze, copper and cast irons. This rebound hardness tester features a universal D impact device and is capable of displaying measurements...

For use with REED SD Series Data Loggers. REED RSD-16GB Offers Works with: REED R2020 REED R2450SD & SD-947 REED R3000SD & SD-230 REED R3100SD & SD-4307 REED R4000SD & SD-4207 REED R4500SD & SD-4214 REED R4700SD & SD-9300 REED R6050SD & SD-3007 REED R6250SD & SD-2010 REED R7000SD &...

The R8008 detects alpha, beta, gamma and X rays, offering user adjustable alarm limits. This portable radiation meter also is equipped with internal memory for storing up to 4000 data groupings and the capability to pair wirelessly with a PC over Bluetooth. Features Detects Alpha, Beta, Gamma, and X radiation Automatic selection of...

This data logging Indoor Air Quality (IAQ) Meter has the ability to record samples on internal memory and keep track of registered readings with a time and date stamp. The R9905 features a Nondispersive Infrared (NDIR) CO2 sensor for stable, accurate readings and the option to track live measurements via software. Features...

Replacement Temperature and Humidity Probe for the REED R9905 Data Logging Indoor Air Quality Monitor.

The Reed R9910SD Indoor Air Quality Meter monitors up to three probes all at once, offering precise recordings with convenient features such as Data hold, Max/Min, and a backlit LCD display. Records can be manually recorded up to 99 readings or set to a desired sampling rate from 1 sec to 8 hours—without the...

This compact light meter is capable of taking Lux and Footcandle (Fc) measurements. The R1930 features a backlit LCD display, data hold and min/max functions, low battery indicator and auto shut-off. Light meters are used to measure light levels in various areas of a facility, such as warehouses, manufacturing plants, and offices,...

Measure the hardness of rubber, elastomers, leather and other soft materials using the Reed Durometer Portable Electronic Hardness Tester Shore A HT-6510A. Its digital display provides maximum and average readings while the zero button allows for quick adjustments in the field. Features Shore A hardness tester designed to measure hardness of rubber,...

The Adaptation set with eye-bolt fits all Macro-Line Scales (replacing the standard hook). Please observe the detailed information of instruction for exchange.Examples of useFor traction ropes that may not unhook.A snap-hook (not included) attached to the eye-bolt will provide a flexible safe fixing. Thread: M8 Outer eye Ø: 20 mm Inner...

The drag pointer is part of the standard equipment of all Macro-Line Scales. It is a plastic ring which easily clicks over the metal tube. Before measuring move the drag pointer to zero. With increasing load the drag pointer is moved down by the marker and will remain in position of...

With this accessory all Medio-Line Scales up to max. 2500 g / 25 N can be easily transformed into pressure measuring instruments within seconds. Drag pointer for maximum load indication per measurement included. The lower suspension can be easily removed if not needed. Included Items Pressure rod Ø 1.7 x 290 mm, threaded M2...

This pressure set accessory will transform Macro-Line Scales into a pressure measuring instrument within 20 seconds. Included Items Pressure rod Ø 5 x 360 mm, with thread M5 x 5 mm at both ends 4 interchangeable fittings (M5) Handle Cap-nut (M8) to replace standard lower hook. Video

ISO-17025 calibration certificate with data and uncertainties for new product purchases. Force gauges Load cells A2LA ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Accredited (Certificate #1753.01)

Column extension for increasing the vertical clearance space for tall samples. Multiple extensions may be stacked for very long samples. This does not increase travel. Model Description AC1094-1 6" column extension AC1094-2 12" column extension AC1094-3 24" column extension *Old part number: ESM303-001-1 / -2 / -3 Compatible with the following test...

Carrying case for TT02 Torque Tool Tester. Hard plastic carrying case with cushioned insert allows for safe storage and easy transportation. Provides storage space for the TT02 tester, ST001 mounting bracket, AC adapter, and accessories.

Rundown fixtures for TT02 Torque Tool Tester. Provide accurate and consistent torque measurements for electric and pneumatic tools (not for use with impact tools). Select the AC1066-1 to simulate a soft joint with gradual torque buildup, or AC1066-2 to simulate a hard joint with faster torque buildup. Includes an integrated 3/8” square...

These load cells are replacement sensors for Chatillon force gauges DFE, E-DFE, DFE II, DFS, DFS II. These parts are used to replace damaged load cells in these force gauges. Contact us to learn more about force gauges Models Load Cell Part No. Sensor Capacity Where Used (Force Gauge Part...

The Mark-10 Miniature Film and Paper Peel Grip G1124 is ideal for tensile and peel testing of film, paper, and other thin materials. With adjustable serrated jaws, it can securely hold samples up to 0.5 in (12.7 mm) wide and withstand 50 lbF (250N) of force. Combine it with a force...

WGX20 Wedge grips can be used in a variety of tensile testing applications up to 20 kN. They can be used for tensile testing of wires, plastics, metals, elastomers and more. The initial gripping of the sample is done by the jaws tightening as the wedge grip body moves upwards as...

Wedge grips can be used in a variety of tensile testing applications. The WG7-5P comes with pyramid jaw faces and can be used up to 10 kN force. Easy clamping and unclamping action makes specimen loading faster. Self-tightening wedge design eliminates slippage. Can be used for tensile testing of wires, plastics,...

WGX100 Wedge grips can be used in a variety of tensile testing applications. They can be used for tensile testing of wires, plastics, metals, elastomers and more. The initial gripping of the sample is done by the jaws tightening as the wedge grip body moves upwards as the handle is rotated....

This wedge grips can be used in a variety of tensile testing applications including testing of wires, plastics, metals, elastomers. It includes pyramid jaw faces and can be used up to 10 kN force. This grip has a locking function for safe sample Insertion and removal. Self-tightening wedge design eliminates slippage. This...

This self-tightening grip is perfect for general purpose tensile testing. Straight cut faces ensure a secure grasp on the sample. Faces may be replaced. Grips feature a spring force lever for quick loading/release of the sample under test. Specifications Capacity: 2.5 kN, 562 lbf Includes upper and lower grips Sample width: up...

This grip is ideal for general pull testing applications. Manually tightened serrated jaws may be individually adjusted for samples up to 0.25" (6.3mm) thick. Use this grip with a Mark-10 force gauge and a test stand to create a complete testing system. Included Items (1) Parallel jaw grip (1) Thread adapter, 5/16-18M to...

G1100 vice grip is for general tensile and pull testing applications up to 2,000 lbF (10 kN). Pyramidal jaw faces and generous clearance effectively secure a wide range of sample materials and sizes.Includes integrated eye end mounting, and requires an eye end adapter to mount to Mark-10 force gauges or force...

Versatile, easy to use grip. Applicable for small components, for example, electronic components. Commonly used as a top grip in combination with peel fixtures. It's light weight so it can be used on lower capacity load cells and force gauges. Features and Specifications Force capacity: 2 kN (450 lbF) Connection fitting: 5/8"...

These vice grips are used in tension testing on force test stands and material test systems. Jaws can be offset for asymmetrical test specimens. A T-handle is on one side and the other side can be adjusted using a hex key or twisting by hand. This vice grip features a 5/8" integrated female...

Grab test vice grips are used to determine the breaking strength and elongation of textile fabrics using a grab test procedure, ASTM D5034. The grab test is commonly employed to assess the tensile properties of woven or non-woven fabrics. Wave jaws are used to hold the fabric securely without slippage during...

These vice grips are used in tension testing on force test stands and material test systems. This grip has a 5 kN (1,000 lbF) load capacity and able to open to maximum of 50 mm.Jaws can be offset for asymmetrical test specimens. A T-handle is on both sides to easily adjust jaw positions.Grip...