All products

• Roller diameter: 20 or 25 mm
• Roller width: 57 mm

• Force capacity: 20 N (5 lbF)
• Opening: 0 - 3.4 mm
• Weight: 98 g
• Jaw Type: Pyramid, 10 mm x 10 mm surface

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 25 mm male eye end with 10 mm pin
• Compatible with Shimadzu 10 kN and 20 kN test stands

• 50 kN Capacity
• Steel

• Chatillon and Mark-10 ergonomic attachments to a Shimpo force gauge.

• Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
• M30x2 External Thread

• Base Plate assembly that comes with the CS225, CS1100, CS2-225 and CS2-1100.

• Force capacity: 2 kN (450 lbF)
• Opening: 0 – 10 mm
• Pyramid (serrated) jaws, pyramids 1.2 x 45°

• Capacity: 1 kN [225 lbF]
• Rubber Backstop, smooth Roller

• Series 7, 5, 4, TT01, TT02, TT05, WT3-201(M)

• Capacity: 2,250 lbF [10 kN]
• Opening: 0-0.3 in [0-8 mm]
• Jaw Width: 1.2 in

• Capacity: 3200 g
• Readability: 0.01 g
• Pan Size: 180 mm

• 5/8" [15.8 mm] male eye end with 8 mm pin
• #10-32, 1/4-28 or 1/2-20 thread

• Secures a fixture or sample during torque testing
• Torque capacity: 100 lbFin (11.3 Nm)

• Compatible: DFX2 Gauge

• Measures Gauge & Differential Pressure
• Capacity: 5 psi

• Compatible with Mark-10 Series E Force Gauge

• Compatible with Mark-10 Series E Force Gauge

• Compatible with Mark-10 Series E Force Gauge

• For DFT Force Gauges

• Compatible with ESM303, F105-IM(T), F305-IM(T), F505-IM(T), F105-EM, F305-EM, F505-EM

• 4" Dial Size, 0-200 PSI

• Capacity: 2.5 kN [562 lbf]
• Groove sizes: 14 ga. to 4 ga.

• Capacity: 2,000 lbF
• Groove size range: 0.08" to 0.46"

• Dies A, B, C, D
• 12x59, 6x59, 6x33, 3x33 mm

• Type I, II, IV, V
• 13x57, 6x57, 6x33, 3.18x9.53 mm

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

• Precisely measure speed, distance, acceleration and power.

• Precisely measure speed, distance, acceleration and power.