All products

Monitor muscle activation and gather data about muscle distribution with this pack of two portable, non-invasive EMG sensors.

Capacity: 300 lbF

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 1.25" [31.8 mm] female eye end with 12.8 mm diameter clevis pin

• Compatible with Chatillon DFS3 Gauges

• 50 kN Capacity
• Steel

• Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
• M30x2 External Thread

• Force capacity: 5 kN (1,000 lbF)
• Jaw size (mm): 30 x 80
• Jaw types: Pyramid
• Opening: 0-100 mm (0-4 in)

• Accessory for ES30 Manual Test Stand.
• Available in 6", 12", and 24" lengths.

• G1109 Accessory
• Allows the G1023 or G1058 grips to mount to the G1109 Peel Fixture

• Capacities: 0.25 to 100 lbF
• Compatible with 3i, 5i, 7i Indicators

• Connection: #10-32F Thread and 5/16 Hex
• Capacity: 100 lbfin [11.3 Nm]
• Opening Diameter: 0.65 in to 1.55 in.

• Used with DFS2-R-ND

• DFGS Force Gauge Keypad

• Includes Cap Grip

• Calibration (Min-Max): 0 - 30 PSI
• Face Size: 2 IN
• Fitting Size: 1/8 IN

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

• Compatible with Chatillon Force Gauges

• Accessory for TSB100

• Force: 0-150 lbs
• Range of Motion: 0-180 degrees

• Force capacity: 1 kN (200 lbF)
• Jaw sizes (mm): 30 x 30, 30 x 50, 30x80, 30x100
• Jaw types: Pyramid, Rubber, V-Jaw and Wave
• Opening: 0-50 mm

• Compatible with Mark-10 Series E Force Gauge

• Roller diameter: 25 mm
• Roller width: 30 mm

• Force capacity: 5 kN (1,000 lbF)
• Jaw sizes (mm): 30 x 50, 30 x 100 mm
• Jaw types: Pyramid, Rubber, V-Jaws
• Opening: 0-50 mm

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 16 mm male eye end with 6.5 mm pin
• Compatible with Shimadzu 100 N to 5 kN test stands

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 25 mm male eye end with 10 mm pin
• Compatible with Shimadzu 10 kN and 20 kN test stands

• Load capacity: 2,000 lbf (10 kN)
• Body: Steel
• Span: Adjustable from 4 mm -170 mm

• Chatillon and Mark-10 ergonomic attachments to a Shimpo force gauge.

Puncture fixture to test slow rate penetration resistance of flexible barrier films and laminates according to ASTM-F1306.

• Compatible with Mark-10 Force Gauges (Series 2, 3, 4, 5, 7)

• Capacity: 100 lbF-in [11.3 Nm]

• Capacity: 2,250 lbF [10 kN]
• Opening: 0-0.3 in [0-8 mm]
• Jaw Width: 1.2 in

• Compatible with EDXtreme Dynamometer

• Capacity: 100 lbF-in, optional 200 lbF-in