Best selling products

• Compatible: TSC1000

• Capacities: 0.25 to 100 lbF
• Compatible with 3i, 5i, 7i Indicators

• Compatible with EDXtreme Dynamometer

• For G1109 Peel Fixture

• For G1109 Peel Fixture

Measures air velocity, air temperature, ambient temperature, relative humidity, light and contact temperature

• Capacity: 2,000 lbF [9 kN]
• Max sample size: Ø0.39 in [10 mm]

• Compatible with ESM303, F105-IM(T), F305-IM(T), F505-IM(T), F105-EM, F305-EM, F505-EM

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

Monitor muscle activation and gather data about muscle distribution with this pack of two portable, non-invasive EMG sensors.

• Force capacity: 1 kN (200 lbF)
• Jaw sizes (mm): 30 x 30, 30 x 50, 30x80, 30x100
• Jaw types: Pyramid, Rubber, V-Jaw and Wave
• Opening: 0-50 mm

• Force capacity: 5 kN (1,000 lbF)
• Jaw sizes (mm): 30 x 50, 30 x 100 mm
• Jaw types: Pyramid, Rubber, V-Jaws
• Opening: 0-50 mm

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 1.25" [31.8 mm] female eye end with 12.8 mm diameter clevis pin

• Compatible with Chatillon DFS3 Gauges

• 50 kN Capacity
• Steel

• Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
• M30x2 External Thread

• Force capacity: 5 kN (1,000 lbF)
• Jaw size (mm): 30 x 80
• Jaw types: Pyramid
• Opening: 0-100 mm (0-4 in)

• Force capacity: 2 kN (450 lbF)
• Opening: 0 – 10 mm
• Pyramid (serrated) jaws, pyramids 1.2 x 45°

• Capacity: 100 lbF-in [11.3 Nm]

• Connection: #10-32F Thread and 5/16 Hex
• Capacity: 100 lbfin [11.3 Nm]
• Opening Diameter: 0.65 in to 1.55 in.

• DFGS Force Gauge Keypad

• Used with DFS2-R-ND

• G1109 Accessory
• Allows the G1023 or G1058 grips to mount to the G1109 Peel Fixture

• Calibration (Min-Max): 0 - 30 PSI
• Face Size: 2 IN
• Fitting Size: 1/8 IN

• Includes Cap Grip

• Dies A, B, C, D
• 12x59, 6x59, 6x33, 3x33 mm

• Type I, II, IV, V
• 13x57, 6x57, 6x33, 3.18x9.53 mm

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 8 mm female eye end, 3 mm pin hole

• Compatible with Chatillon Force Gauges

• Load capacity: 2,000 lbf (10 kN)
• Body: Steel
• Span: Adjustable from 4 mm -170 mm

• Force: 0-150 lbs
• Range of Motion: 0-180 degrees

Fixture for testing flatwise tensile strength and tensile adhesion properties according to ASTM C297, ASTM D3354, ASTM D1623B, EN 1607, EN 2243-4, DIN 53292.

• Compatible with Mark-10 Series E Force Gauge

• Roller diameter: 25 mm
• Roller width: 30 mm