All Accessories

• Compatible with EDXtreme Dynamometer

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 8 mm female eye end, 3 mm pin hole

Bracket for mounting load cells to a Mark-10 force test stand.

• Base Plate assembly that comes with the CS225, CS1100, CS2-225 and CS2-1100.

Software for Lloyd Instruments test stands.

• Secures a fixture or sample during torque testing
• Torque capacity: 100 lbFin (11.3 Nm)

• Capacity: 2,000 lbF
• Groove size range: 0.08" to 0.46"

• Series 7, 5, 4, TT01, TT02, TT05, WT3-201(M)

• Compatible: DFX2 Gauge

• Compatible with Mark-10 Series E Force Gauge

• Compatible with Mark-10 Series E Force Gauge

• Compatible with Mark-10 Series E Force Gauge

• For DFT Force Gauges

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 5/8-18M External Thread

• Steel compression plate 
• Diameter of 2.2 or 3.78 inch
• 5/8" eye end connection.

• Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin hole
• 5/8-18F Internal Thread

• Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin hole
• 5/8-18M External Thread

• Compatible with legacy Chatillon scales; CDR, CMA, & CTR

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

• 1.25 in. [31.8 mm] female eye end with 1/2 in. [12.8 mm] pin hole
• 20 mm female eye end with 8 mm pin hole

• 1.25" (317 mm mm) male eye end, 1/2" (12.8 mm) pin
• 35 mm male eye end, 13 mm pin
• Compatible with Shimadzu 50 kN test stands

• 5/8" (15.9 mm) female eye end, 8 mm pin
• 12 mm female eye end, 6 mm pin

• 5/8" [15.8 mm] male eye end with 8 mm pin
• M12x1.75 male thread

• TSF and TST horizontal mounting kit

• 1.25" (317 mm mm) male eye end, 1/2" (12.8 mm) pin
• 35 mm male eye end, 13 mm pin
• Compatible with Shimadzu 50 kN test stands

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 35 mm male eye end with 13 mm pin
• Compatible with Shimadzu 50 kN test stands

• Ideal for custom applications
• Matrix of threaded holes

• Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
• 1"-14 Male Thread

• Ripeness testing of fruits and vegetables
• Select from 5/16” (7.9 mm) and 7/16” (11.1 mm) dia.
• One flat end, one rounded end

• Where used: Force gauges series DFGS, DGGS, DFA

• Compatible with DFGS-R-ND / DFA-R-ND (These are indicators that are no longer made)

• Capacity: 2,000 lbF [10 kN]
• Secures Textile webbing, tape, and braided materials.
• Conforms to ASTM D6775.

• Capacity: 100 lbF [500 N]
• Standard: ASTM D6195
• Testing pressure sensitive flexible substrates

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 5.9 mm eye end post, 2.5 mm Clevis pin