All Accessories

• Capacity: 2,000 lbF [9 kN]
• Max sample size: Ø0.39 in [10 mm]

• Test stand controller to RS232, ESM301, ESM-DC, TSFM500-DC, TSTM-DC

• 5/16-18 Thread

• Used with TSA750 and TSA750H

• Accessory for TSF and TSFH manual test stands

• Male Type D, 1.25" [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
• 1.25"-12UNF External Thread

• DFGS Force Gauge Keypad

• Capacity: 100 lbF [500 N]

• Connection: #10-32F Thread and 5/16 Hex
• Capacity: 100 lbfin [11.3 Nm]
• Opening Diameter: 0.65 in to 1.55 in.

• G1109 Accessory
• Allows the G1023 or G1058 grips to mount to the G1109 Peel Fixture

• For G1109 Peel Fixture

• Compatible: TSC1000

• Accessory for ES30 Manual Test Stand.
• Available in 6", 12", and 24" lengths.

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

• Compatible with Chatillon Force Gauges

• Accessory for TSB100

• Compatible with Mark-10 Series E Force Gauge

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 16 mm male eye end with 6.5 mm pin
• Compatible with Shimadzu 100 N to 5 kN test stands

• Chatillon and Mark-10 ergonomic attachments to a Shimpo force gauge.

Puncture fixture to test slow rate penetration resistance of flexible barrier films and laminates according to ASTM-F1306.

• 5/16-18 Thread

• Capacity: 100 lbF

• Compatible with Mark-10 Force Gauges (Series 2, 3, 4, 5, 7)

• For G1109 Peel Fixture

• Accuforce Battery Pack

• Compatible with EDXtreme Dynamometer

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 8 mm female eye end, 3 mm pin hole

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 25 mm male eye end with 10 mm pin
• Compatible with Shimadzu 10 kN and 20 kN test stands

• Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
• M30x2 External Thread

• Base Plate assembly that comes with the CS225, CS1100, CS2-225 and CS2-1100.