Mark-10 Grips and Fixtures

• Capacities: 50, 200, 1200, 2000 lbF
• Jaws: Serrated or Rubber

• Pull testing of tubes, cables, and odd sample shapes
• Force capacity: 200 lbF (1 kN)
• Adjustable cam spacing: 0-0.34 in (0-8.6 mm), depending on model 
• Crosscut Rollers

• Capacity: 30 lbF [150 N]
• Opening: 0.07 in [1.8 mm]

• Force capacity: 1 kN (200 lbF)
• Jaw width: 31.8 mm (1.25 in)
• Jaw type: Pyramid
• Opening: 0-6 mm (0-0.25 in)
• Weight: 0.29 kg (0.75 lbs)

• Capacity: 100 lbF

Force capacity: 500 lbF (2.5 kN)

Adjustable cam spacing: 0-1 in (0-25.4 mm) 

Crosscut Rollers

• Capacity: 2,000 lbF (9 kN)
• Max. sample width: 2.36 in (60 mm)
• Pyramid (Serrated) Roller

• Capacity: 500 lbF (2,500 N)
• Groove sizes [in(mm)]: 0.01 (0.3), 0.03 (0.7), 0.04 (1.0), 0.06 (1.5), 0.08 (2.0), 0.09 (2.3), 0.11 (2.8), 0.12 (3.0), 0.14 (3.5), 0.15 (3.8), 0.17 (4.3), 0.18 (4.5), 0.20 (5.1), 0.21 (5.3), 0.23 (5.8), 0.25 (6.3)

• Capacity: 2000 lbF [9 kN]

• Capacity: 100 lbF

• Force capacity: 1 kN (200 lbF)
• Jaw sizes (mm): 30 x 30
• Jaw type: Pyramid
• Opening: 0-30 mm
• Weight: 0.5 kg (1.0 lbs)

• Force capacity: 9 kN (2,000 lbF)
• Jaw size (mm): 40 x 60
• Jaw types: Pyramid
• Opening: 0-34 mm (1.34 in)
• Weight: 2.7 kg (5.9 lbs)

• Force capacity: 2.5 kN (500 lbF)
• Jaw width: 1.5 in
• Opening: 0-1.5 in

• Force capacity: 2.5 kN (500 lbF)
• Jaw width: 2.1 in
• Opening: 0-2 in

• Capacity: 2,000 lbF
• Groove size range: 0.08" to 0.46"

• Capacity: 50 lbF [250 N]

• Capacity: 200 lbF [1 kN]

• Pull testing of wire, rope, and yarn
• Force capacity: 1,000 lbF (5 kN)
• Max. sample size: Ø0.21 in (5.3 mm)
• Weight: 1.8 lbs (0.8 kg)
• Connection: Integrated 5/8" Eye End

• Capacity: 2,000 lbF [9 kN]

• Force capacity: 500 N (100 lbF)
• Jaw width (in): 1, 3, 5, 7
• Jaw type: Serrated
• Opening: 0-30 mm
• Weight: 0.14-0.41 kg (0.31-0.9 lbs)

Flip cap pull testing for caps. Engages the tab on a flip cap for pull-off force measurements.

• Testing small diameter round samples like pins, rods, wires
• Capacity: 30 lbf [200 N]

• Secures a fixture or sample during torque testing
• Torque capacity: 100 lbFin (11.3 Nm)

• Capacity: 100 lbF [500 N]

• Capacity: 2,000 lbF [10 kN]
• Secures Textile webbing, tape, and braided materials.
• Conforms to ASTM D6775.

• Light weight aluminum compression plates with threaded connections #10-32 or 5/16-18. Available in 2" or 3".

• Thread adapters for sizes #10-32, #4-40, 5/16-18, M4, M6, 1/2-20, 1/4-28.

• Steel compression plate 
• Diameter of 2.2 or 3.78 inch
• 5/8" eye end connection.

• Swivel to adjust for proper sample alignment.
• Thread sizes #10-32 or 5/16-18.

• Tightens and loosens Mark-10 Eye Ends.