Search Results

Series MR07 force sensors measure tension and compression forces, and are designed for Series F test frames. With Plug & Test® technology, all configuration and calibration data is saved within the sensor, allowing it to be calibrated on the test frame or off-site with a Mark-10 indicator (optional adapter: AC1083 required).Ranges available...

AC1046 eye end adapter kit convert threaded connections on grips and fixtures to and eye end connection. mount to force gauge threaded connections. They have 5/8" [15.9 mm] diameter which is commonly used with test frames, load cells, grips, and force gauges. Eye end adapters provide a commonly accepted industry method...

The Mark-10 MR50 Torque Sensor measure bi-directional torque for a wide variety of applications. Contains a chuck for samples up to 1/2" (12.7 mm) in diameter, depending on capacity. The sensor can be used as a hand held device, or mounted to a torque test stand. Capacities available from 10 ozFin to 100 lbFin...

Battery pack for Chatillon DFIS and CSD200 series gauges. Old Chatillon part number NC000792-1 New Chatillon part number SPK-DFIS-006

Compression plates with diameters between 56 mm to 246 mm with load capacities up to 20 kN. These platens are etched with concentric rings for accurate specimen placement. They are available in aluminum or steel. Aluminum for testing soft samples such as cardboard, plastics, rubber, foams, lightweight springs, bottles and...

A multifunctional instrument for weighing, measuring traction/tension and pressure/compression forces (optional). Always ready for use, needs no batteries. Precise and handy Spring Balance with durable anodized aluminum tube. Tare and zero adjustment. Swivel, rotatable and removable suspension handle. Lower hook swivels, rotates and can be changed using different accessories. Suspension elements...

A multifunctional instrument for weighing, measuring traction/tension and pressure/compression forces (optional). Always ready for use, needs no batteries. Precise and handy Spring Balance with durable anodized aluminum tube. Tare and zero adjustment. Swivel, rotatable and removable suspension handle. Lower hook swivels, rotates and can be changed using different accessories. Suspension elements...

Battery pack for Chatillon DFS, DFS-R and DFE series gauges and indicators.

Force gauge attachment that usually comes as an accessory when purchasing a force gauge. SPK-FMG-008A Capacity: 100 lbF Thread size: #10-32 SPK-FMG-008B Capacity: 500 lbF Thread size: #5/16-18

Force gauge attachment that usually comes as an accessory when purchasing a force gauge. SPK-FMG-009A Capacity: 100 lbF Connection: #10-32F SPK-FMG-009B Capacity: 500 lbF Connection: 5/16-18F

Chisel point attachments thread onto force gauges for puncture and compression testing. Model A ØB C G1025 0.5 [12.7] 0.25 [6.4] #10-32F G1032 1.00 [25.4] 0.50 [12.7] 5/16-18F Contact us to learn more about force gauge attachments

Small chuck grip for testing pin shaped specimen from 0" to 0.05" O.D. A front thumbscrew ensures quick installation and release of the specimen. The grip is supplied with a #10-32 mounting hole for mounting to force gauges, loadcells and test stands. Features and Specifications Capacity: 25 lbF (120 N) Weight: 0.2...

The DFE3 force gauges provide optimal value-for-money, featuring advanced digital capabilities tailored to a wide range of essential applications. As such, they are perfect for sampling production values at the terminal stage, conducting pass/fail tests, or recording quality metrics for incoming product assessment. The Chatillon DFE3 Series is the new generation...

The CHATILLON® LG Series mechanical force gauge is ideal for a wide range of force testing applications. The LG Series features a larger, 2.25-inch dial for improved resolution and readability, peak hold button, ergonomic shape and improved accuracy of +0.5% of full scale. The LG gauge is an excellent, economical solution for...

Pesola Macro Line spring scales for weighing, measuring traction/tension and pressure/compression forces (with optional attachment). Available capacities of 5kg, 10kg, 20kg, 35kg, 50kg, 10lbs, 20lbs, 40lbs, 100lbs, 50N, 100N, 200N, and 500N. Precise and handy spring balance with durable anodized aluminum tube. Lower hook swivels, rotates and can be changed...

This slender grip is ideal for testing small and hard-to-reach parts, such as electronic and mechanical components. Use this grip with a force gauge and a test stand to create a complete testing system. Specifications Capacity: 30 lbF [150 N] Weight: 0.05 lb [0.02 kg] Connection: #10-32F thread Includes a #10-32 M/M stud with...

T-Slot Table compatible with the Chatillon TCM Motorized Test Stands.

Red indicator needle remains at maximum reading until reset. Measures pinch force to 45 lbs. Includes instructions, handy carrying case and one-year warranty. Contact us to learn more about Jamar dynamometers

Calibrate torque tools with this torque measurement sensor, or use it as a component of a torque testing system. Tapped holes on every surface allow for easy mounting to a work bench, or fixture within a testing system. Capacities available from 10 ozFin to 100 lbFin (7 to 1,150 Ncm). Features Member of the...

A multifunctional instrument for weighing, measuring traction/tension. Always ready for use, doesn't need batteries. Precise, ultra-light and handy Spring Scale with transparent tube and long, clear double display. Patented tare, zero-adjustment and spring suspension technology. Free turning inner tube which neither influences reading nor tare. Tare screw with incremental rotation, to...

The HOGGAN wireless ErgoFET™ is a digital force gauge that empowers ergonomic, engineering, and safety professionals to objectively measure and quantify human and product performance. This capability yields improved product functionality, quality, and manufacturing efficiency, while reducing costs associated with cycle time and repetitive motion injuries. The wireless ErgoFET™ force gauge...

The Peel Roller is designed for the preparation of pressure-sensitive adhesive (PSA) specimens. The roller is used to apply a uniform, repeatable pressure to adhesive tape samples prior to peel adhesion testing, helping to ensure consistent bonding between the adhesive and the test panel. According to ASTM-D3330, DIN EN1939, DIN EN...

Universal AC adapters / chargers for Mark-10 force and torque gauges and indicators. Model Description AC1030 AC adapter / charger, 110V AC1031 AC adapter / charger, 220V EUR AC1032 AC adapter / charger, 220V UK AC1035 AC adapter / charger, 220V AUS AC1030 replaces 08-1007 AC1031 replaces 08-1008 Any of the above adapters are compatible...

Jaws with different surface types and dimensions. The parts on this page are for ordering additional jaws. Jaws can be replaced using a hex key. Compatible Vice Grips VG1000 Vice Action Tensile Grip VG1000-S50 Vice Action Tensile Grip VG1000-S100 Vice Action Tensile Grip Models Jaw Model Surface Type Clamping Surface Dimensions...

The ES10 and ES20 manual test stands are compact and economical solutions for compression and tensile testing of small samples. For larger samples and more space for grips please see the ES30 manual test stand. Choose between a lever (ES10) for quick-action testing or a hand wheel (ES20) for more precise testing...

Adapts a Series FS force sensor or PTAF sensor adapter to Plug & Test® type interface, for ease of external calibration via a Mark-10 indicator. Also permits mounting of a Series FS05 sensor to Models F755-IM(T), F1505-IM(T) IntelliMESUR test frames and F755-EM, F1505 EasyMESUR test frames.

G1018 Swivel Adapter when used with a force gauge and grip will swivel to adjust for proper sample alignment. This adapter is designed for tensile testing. | Dimensions | Documents Mark-10 Grips Catalog

This general purpose vise can be used in a wide range of tension and compression testing applications. Wide opening range accommodates large and unique samples. Rugged design permits testing up to 500 lbF (2,500 N).The G1070 self-centering vise grip offers smooth removable jaws can be field-modified to improve sample gripping characteristics...

For securing small diameter wires and filaments in pull tests. The sample wraps around the bollard and the loose end is secured by the adjustable jaw. Integrated swivel ensures sample alignment under load. Features and Specifications Pull testing of small diameter wire and filaments Max. sample size: Ø0.10 in (2.5...

The CHATILLON® SLC Series loadcells are full-bridge strain gauge sensors complete with 15-pin plug. These loadcells are used with the Chatillon DFS II-R-ND Series digital indicator. They may also be used with the Chatillon TCD Series digital force testers (recalibration with a TCD Series Console is required). Accuracy: ±0.25% of full...

The TSC1000 Force Measurement Test Stand is ruggedly built for testing up to 1,000 lbF (5 kN) of compression or tension force. A large hand wheel requires little effort, even at high loads, and a precision Acme screw and nut ensure smooth operation over time. The stand includes a loading table with threaded...

The 5i advanced digital indicator is designed to work with Mark-10 remote force and torque sensors. The PTA, Plug & Test™, plug stores calibration and the configuration data. This allows swapping out of different sensor types and capacities without having to recalibrate or adjust the settings each time. The menu...

R02 Load Button Sensors for compressive loads of up to 10,000 lbF (50 kN). Compact and rugged, the R02 is ideal for heavy duty applications with space constraints. Compatible with Mark-10 indicators (sold separately) through unique Plug & Test™ technology. Accuracy: +/-0.15% of full scale + indicator Safe Overload: 150% of...

The Jamar Digital Pinch Gauge provides clinicians with a dependable instrument for precise pinch strength evaluation. Its accurate measurements enables the development of personalized rehabilitation protocols, facilitating specific therapeutic approaches. Incorporating this digital gauge into clinical assessment protocols enhances efficiency, optimizing rehabilitation outcomes through evidence-based interventions customized to each patient's functional...

This fixture is used for testing the tack force of pressure-sensitive adhesives, in conformance with ASTM D6195 and related standards. A looped sample is loaded onto the test strip, and the closed end of the loop is secured by an upper grip (not included - suggested model: G1008). The test strip may...

Designed for health and sports professionals, the K-Deltas 3D force plates evaluate key factors such as strength, balance, and complex movement patterns. The K-Deltas 3D offer advanced 3D motion analysis, capturing human movement with exceptional accuracy. With an accuracy of ± 0.1% across three axes, the K-Deltas 3D generate reliable,...

K-Power is a cutting-edge hybrid sensor that revolutionizes performance tracking by integrating IMU (inertial measurement unit) and UWB (ultra-wideband) technology to precisely measure speed, distance, acceleration and power in sports and rehabilitation settings. Unlike traditional sensors, K-Power is wireless, so no movement is restricted. K-Power works in indoor and outdoor facilities...

The CHATILLON® DG Series mechanical force gauge is the perfect choice for numerous force testing applications, up to 500 lbf (2.5 kN). With an upgraded 2.25-inch dial for more precise readings, a peak hold button, a highly durable plastic housing, a universal mounting plate, and an ergonomic shape, this gauge offers even better...

MR01 load cells are designed for measuring tension and compression force, with applications in virtually every industry. The sensor can be integrated into an existing system or mounted to a Mark-10 test stand. A shortened cable is available for mounting to ESM1500LC, ESM303, and ESM303H test stands. Capacities available from 50 to...

Extension rod attachment is used between a force gauge and another attachment or grip. Sold as individual attachments, image illustrates the three sizes. Not recommended for compression applications because misalignment could result in buckling and damage to the force sensor. Part no. Length Used with Mark-10 force gauges of capacity G1024...

Secures the ends of tubing, cables, and odd shaped samples for pull testing applications. Engaging and disengaging samples is quick and easy, with a side slot for sample insertion and serrated steel rollers. The rollers can be repositioned to the desired spacing, accommodating a broad range of sample widths up to 1"...

This grip is designed for wire pull testing applications. The grip secures wire terminals, cables, connectors, and other samples for wire pull tests. Grooves of multiple sizes are provided to accommodate a wide range of wire diameters up to 0.25 in. (6.3 mm). Simply rotate the turret wheel to the desired...

These grips are designed for film, paper, and other thin materials for tensile and peel testing, as per ASTM F88 and related standards.Adjustable serrated interlocking jaws effectively secure samples for up to 100 lbF (500N) of force, while an ergonomic, rubberized knob easily engages and disengages the sample. A precision Acme...

These adapters allow a force gauge to be used in inline pull testing or weighing applications. A 5/16-18 threaded hole at each end is axially aligned with the load cell shaft in the force gauge, for mounting hooks or other attachments. Three adapters are offered, accommodating Mark-10 force gauges with capacities up...

Series 3 digital force gauges are designed for tension and compression force testing in numerous applications from 0.12 lbF to 500 lbF (0.5 N to 2500 N). The gauges feature a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu...

Bend fixtures designed for 3-point and 4-point bend testing of plastics, metals, ceramics, tubing, and many other materials. The fixtures conform to ASTM C1161, D790, and related standards. Two base sizes (G1095 and G1096) are available, along with an upper anvil (G1097). Use a base-anvil combination for 3-point bend testing or...

Spanner wrench is used to tighten locking rings on the Mark-10 eye ends. Mark-10 Eye End Adapters Data Sheet

These vice grips are used in tension testing on force test stands and material test systems. The force capacity of these grips is 500 lbF. Pyramid (crosscut), rubber, wave, or v-jaws are included. A choice of 30 mm, 50 mm, 80 mm and 100 mm widths for the jaws. The dual...

AC1045 series eye end adapter kits mount to force gauges. They have 5/8" [15.8 mm] diameter which is commonly used with test frames, load cells, grips, and force gauges. These eye end adapters provide a commonly accepted industry method of attaching grips and fixtures to load cells and test frames. They...

Measures isometric grip force and strength increases in rehabilitation and physical therapy programs. Ideal for routine screening of grip strength and initial and ongoing evaluation of hand trauma and dysfunction. Adjustable handle that allows user to quantify grip strength for different sized objects. Contact us to learn more about Jamar...

Upgrade old CS225 and CS1100 touchscreens to a new 2 in 1 laptop/touchscreen. Upgrading to the SPK/CS2/0057 2 in 1 laptop/touchscreen will provide faster start up, faster processor, and more memory. Includes brackets needed for mounting the touchscreen to the CS.