Search Results

The G1105 Cork Pull fixture is designed to extract a cork stopper out of a bottle for pull force measurements, in conformance with ISO 9727. The G1105 accommodates up to 1.5 L bottles, and is compatible with both natural and synthetic stoppers. To use, load the bottle onto the spring loaded tray. The...

The MB120 delivers functionality and precision that you can rely on, and is easy to operate and clean – you can test more samples in less time! Advanced features such as a temperature guide help to analyze optimum drying temperature, and methods and results storage allows statistical analysis of measurements. Three...

Measuring moisture content has never been easier than with the MB90 Moisture Analyzer. The MB90's halogen heating distributes heat uniformly over the sample and speeds up the drying process, delivering fast and precise measurements. Designed for tool-free cleaning, its components can be easily removed for quick and easy maintenance. Operating...

Securely test round samples such as wire or tubing with the Mark-10 Jacobs Chuck Vice. Three sizes offer a versatile grip for consistent results. Specifications Model CapacitylbF Weightlb Shipping Weightlb Chuck Key Size G1010-1 30 0.25[0.11] 1[0.50] KGA G1010 30 0.35[0.16] 1[0.50] KGA G1010-2 30 0.66[0.30] 2[0.90] KK Connection: #10-32F Thread...

A climbing drum table for starting the test. Use with the Climbing Drum Peel Fixture.

AC1052 and AC1058 force gauge mounting plates are suitable for all Mark-10 force gauges in OEM and custom mounting applications. The plates have an integrated dowel pin, which mates with the blind hole in the rear of Mark-10 force gauge housings. AC1052 mounting plate kit is for force gauges with...

USB cable, type micro B to A. The length of the cable is 6 ft. Compatible Instruments Communication from the following instruments to a PC. Force gauges: Series 7, 5, 4, 3 Digital indicators: 7i, 5i, 3i Torque gauges: TT01, TT02, TT03, TT05 Wire pull tester: WT3-201(M)

SPK-FMG-142 Curved Compression Fixture Capacity: 500 lbf Connection: 5/16-18

Cone attachments thread onto force gauges for puncture testing. Contact us to learn more about force gauge attachments Dimensions Model A ØB C G1026 0.5 in [12.7 mm] 0.25 in [6.4 mm] #10-32F G1033 1.00 in [25.4 mm] 0.50 in [12.7 mm] 5/16-18F

The CHATILLON® TLC Series load cells are compatible with Chatillon test stands TCD110, TCD225 and TCD1100. Contact us to learn more about test stands | Features and Specifications Compatible with TCD225 and TCD1100 Test Stands. Accuracy: .25% of full scale (non-dedicated) .1% of full scale (dedicated) dedication requires calibrating load cell...

One Gallon of SAE20 tester oil for use with ASHCROFT Dead Weight Testers and Pumps.

The Mark-10 WT3-201 is discontinued and replaced by Mark-10 WT-205 Wire Crimp Pull Tester. The WT3-201 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull...

Wedge grip assembly AC1132 for WT-205M Motorized Wire Crimp Pull Tester and WT-205 Manual Wire Crimp Pull Tester. Self-tightening jaws effectively secure the sample. This type of grip is standard on the actuator end, but may also replace the standard turret fixture.

Blank terminal fixture (AC1136) for WT-205M Motorized Wire Crimp Pull Tester and WT-205 Manual Wire Crimp Pull Tester.

Includes a matrix of #10-32 threaded holes and 5/16-18 center hole, and 5/16-18M to #10-32F adapter.

Series TT03C digital cap torque gauges are quick and economical solutions for basic handheld cap torque testing. These portable instruments eliminate the need to secure closures in a fixture or more elaborate testing system. A dedicated remote torque sensor with Jacobs chuck is supplied with a universal grip for caps from 0.65 - 1.55...

Displays up to 1" of displacement with resolution of 0.001". Brackets for mounting to a Mark-10 ES10 or ES20 manual test stand is included.

These grips are designed for gripping samples during torque testing, for use with TST, TSTH, TSTM, and TSTMH Torque Measurement Test Stands. Available in three chuck capacities. Includes key. Mounts directly to Series TST torque test stands Model Capacity - lbFin Weight - lb G1022-1 100 [11.3] 0.50 [0.23] G1022-2 100 [11.3]...

The G1023 Bottle Grip secures bottles, containers, and other items for cap opening and closing tests. Rubber edged gripping arms grip a wide range of sample shapes and sizes and can be individually positioned at angles of up to 180°. Specifications Torque Capacity: 100 lbFin [11.3 Nm] Load Force Capacity: 50...

This set of fixtures is used to produce a 90° bend in fiber board materials and plastics. The fixtures are compliant to TAPPI standard T829 for evaluating the relative quality of scores in corrugated containers. Features Set of upper and lower dies produce 90° bend in corrugated board and plastics Meets...

Used to determine the opening force of flat folded cartons along their score lines. Ideal for numerous applications in the packaging, food and beverage, medical device, consumer products, and many other industries.Upper and lower fixtures are easily removable.Use this fixture with a choice of test stand and force gauge to create...

The Mark-10 Axial Compensator compensates for axial movement in torque tests of threaded fasteners, bottle caps, etc. The axial compensator has a hex tail which fits into the chuck of a Series R50 or TT03 torque gauge, and includes mounting hardware to mount to a G1053 or G1058 grip.

The G1099 Puncture Fixture is designed for puncturing gypsum board and other materials to determine puncture resistance. Compatible with all current Mark-10 force gauges. For added safety, the spring-loaded needle retracts when not actively pushed into a material. Features Test the puncture force of gypsum board and other materials. Spring-loaded aluminum...

4 Point bending fixture Conforming to ASTM D7249 and ASTM C393. These flexural fixtures are used to test sandwich construction panels for measuring force displacement behavior, ultimate stress and modulus. Features Load capacity: 10,000 lbf (50 kN) Body: Aluminum Temperature range: 0 … +70°C Coupling: 5/8" (15.9 mm) or 1.25" (318 mm)...

This cable is used by the Chatillon CS2 test stand laptop console or CS test stand with tablet upgrade to communicate directly to a PC. Connections on the cable are USB-A on both ends. It can be used to export data using RS232 or used in controlling the test stand using...

ENC0125 Gauge to LTCM Cable Interface the DF Series force gauge to a TCM or LTCM Motorized Tester | Specifications Connector: Hirose 12 Connector: 9-pin Female Length: 9 ft

This swivel hook threads onto a force gauge and can be used in pull testing springs or other samples with a loop end. The swivel action of the hook keeps the sample pulling in proper alignment. Capacity: 100 lbF Connection: #10-32 F

Communication cable from the TCM100 or TCM350 series test stands to a DFS3 or DFE3 series force gauge.

NC000855 Printer Cable Used to interface an RS232 9-Pin output to a 25-Pin Printer Input. | Specifications Connector: 25-pin printer male Connector: 9-pin RS232 female Cable Length: 10 ft

This swivel hook can be used in pull testing springs or other samples with a loop end. The swivel action of the hook keeps the sample pulling in proper alignment. Capacity: 500 lbF Connection: 5/16-18 F

USB cable, type B to A. The length of the cable is 6 ft. AC1107 replaces the previous part number of 09-1158. Compatible Instruments Communication from the following instruments to a PC. Test Stands: ESM303, ESM750, ESM1500

Interface cable for Mark-10 force gauges to Mark-10 test stands, gauge to test stand cross-head. Compatible Instruments Force Gauges and Indicators-Series 7, 5 and 4 Test Stands-ESM303, ESM750 and ESM1500

Puncture fixture according to ASTM-D5748 to determine protrusion puncture resistance of stretch wrap film. This light version is designed to fit smaller machines. Toggle clamps and a compression ring with concentric ridges effectively secure the material, while the included plunger with ball probe stretches and ruptures the sample. Specifications Force capacity:...

The CHATILLON®MT150 Series mechanical test stand is an easy-to-use solution for force measurement applications up to 150 lbf (660N) capacities. The test stand may be equipped with a quick-action lever or precision handwheel for controlling crosshead speed and travel. The MT150 test stand can be bench mounted, wall mounted or positioned...

Hand evaluation kit including Jamar Hydraulic Hand Dynamometer, Jamar Pinch Gauge, and Deluxe Small Joint Goniometer. Jamar Hydraulic Hand Dynamometer Measures isometric grip force and strength increases in rehabilitation and physical therapy programs. Ideal for routine screening of grip strength and initial and ongoing evaluation of hand trauma and dysfunction....

The Eye End Adapter (A317-M12) is designed to connect grips, fixtures, and accessories to force test stands and universal testing machines (UTMs). Featuring a 1.25 in. male eye end on one side and a M12x1.75 external thread on the other, it provides a secure mechanical interface between test frames and load-bearing attachments. This...

This puncture resistance fixture is designed to evaluate the puncture performance of protective materials, including gloves, fabrics, and flexible barriers, in accordance with DIN EN388 and ANSI/ISEA 105:2005 standards. This test is used to define how well gloves protect against common workplace hazards such as abrasion, cuts, tears, and punctures....

When ordering a Mark-10 AC1092 safety shield with a new test frame, the AC1125-1 emergency switch connector is required. For an existing test frame, verify if this connector is present. If not, it can be installed in the field with kit AC1125-2, or retrofitted at our factory. Model Description AC1125-1 Emergency switch...

Remote emergency switchConvenient for when the standard emergency switch is inaccessible, for example if a safety shield is used. Includes an 8’ (2.4 m) cable, and plugs directly into the rear of the test stand. The standard, attached emergency switch remains operational while the remote switch is plugged in.

Model 343, can be used wherever there is a need to fit a link through the body of the load cell. The instrument is particularly suitable for continuous measurement of axial forces for example on anchoring devices, and to monitor bearing forces that arise on lathes, boring machines, extrusion presses etc. If...

Fixture for testing flatwise tensile strength and tensile adhesion properties according to ASTM C297, ASTM D3354, ASTM D1623B, EN 1607, DIN 53292. This fixture is used to measures the strength of the bond between the core material and the face sheets of sandwich constructions by applying a tensile force perpendicular to...

Inserts for JLW113 Flatwise Tensile Strength Adhesion Fixture. Models and Sizes Model Standard Insert INSERT-JLW113-25.4 ASTM C297, ASTM D1623B 25.4 x 25.4 mm INSERT-JLW113-50 EN 1607, EN2243-4, DIN 53292 50 x 50 mm INSERT-JLW113-50.8 ASTM C297 50.8 x 50.8 mm INSERT-JLW113-76.2 ASTM C297 76.2 x 76.2 mm INSERT-JLW113-100 ASTM D3354, EN 1607 100 x 100...

A climbing drum test is a typical peel testing method used to determine the de-lamination characteristics of adhesives used to bond different materials together. This test covers the determination of the peel resistance of adhesive bonds between a relatively flexible adherent and the relatively flexible facing of a sandwich structure and its core. The...

Spare rubber gasket for JLW-Canners canning pressure gauge. Contact us to learn more about canners vacuum gauges

Spare puncture probe/needle for JLW-Canners canning pressure gauge. Contact us to learn more about canners vacuum gauges

Robust and adaptable, the K-Pull offers an objective way to quantify the isometric strength of muscular groups. With its accompanying accessory kit, measure strength ratios, stamina, and muscle balance from any direction. K-Pull is one of 8 devices that communicates to a user-friendly mobile app, Kinvent App. This software app allows you...

The K-Grip Accessory can be attached to KINVENT’s best-in-class hand dynamometer, the K-Grip, to more easily accommodate a greater variety of hand sizes. The attachment connects to the sensor magnetically and can be removed by simply pulling it straight forward with about 1 kg (2 lbs.) of force. Please note the K-Grip...

KINVENT K-Bubble Dynamometer is an innovative device for objectively measuring patients’ force production with any body part. This dynamometer can detect pressure variations and converts them into accurate force readings, allowing for precise testing of adductors or the cervical spine. All necessary accessories are included. K-Bubble is one of 8 Kinvent...

The K-MYO, a non-invasive EMG sensor, facilitates rehabilitation by targeting weakened muscles, monitoring muscle activation and tracking patient progress. This device allows practitioners to gather and review data related to muscle distribution, rebuilding, imbalance, strength, and activation. K-MYO is one of 8 Kinvent sensors that communicates via Bluetooth to a user-friendly mobile app,...

Column extension used on TSB100, TSA750 / TSA750H and TSC1000 / TSC1000H. Price is based on extension being added at time of purchase of the manual test stand. Model Length added to standard column SP-2734-12 Column extension, 12 in. / 305 mm SP-2734-24 Column extension, 24 in. / 610 mm SP-2734-42 Column extension, 42...

These load cells are replacement sensors for Chatillon force gauge Series DFX and DFX II. These parts are used to replace damaged load cells in these force gauges. Models Load Cell Part No. Sensor Capacity Where Used DFX DFX II SPK-DFX-155-010 10 lbF [50 N} DFX-010 DFX2-010 SPK-DFX-155-050 50 lbf...

Includes #10-32, 1/4-28, and 1/2-20 thread bolts, spacers, and washer for mounting load cells to an ESM1500.