All products

• Accessory for ES10 and ES20 manual test stands.

• USB cable included with most Mark-10 force and torque gauges, and wire pull testers.

• Capacity: 4500 lbF [20 kN]
• Opening: 0-0.5 in [0-13 mm]
• Jaw Width: 1.2 in

• Detects alpha, beta, gamma and X rays

• Can be used to assess larger muscle groups because it can be secured to a table, wall bars...

• 5/8" [15.9 mm] female eye end with 8 mm pin
• 1/2-20M Thread

• Load capacity: 10,000 lbf (50 kN)
• Body: Aluminum
• Lengths: 360 mm, 500 mm, 700 mm

• Capacity: 2,000 lbF [10kN]
• Opening: 0-0.3 in [0-8 mm]
• Jaw Width: 10 mm

• Generates a stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of a sound level meter.

• Accessory for ES10 and ES20 manual test stands.

• Cable used in outputting travel data from a Mark-10 manual test stand travel display.

• Capacity: 500 lbF
• Connection: 5/16-18F

• Accommodates any Mark-10 indicator or Series TT03 torque gauge (indicator portion).

• Measure range of motion of joints
• Electronic app connected goniometer

• Male-Type O, 12 mm male eye end with 6 mm pin
• 5/16-18M UNC thread

• Capacity: 30 lbF
• Max Travel: 1.5 in
• Compression only

• Cable for communcation from ESM303, ESM750 or ESM1500 test stands to a PC.

• Capacities up to 5000 lbFin
• For 3i, 5i, 7i Indicators

• SPK-DF-RS232

Flip cap pull testing for caps. Engages the tab on a flip cap for pull-off force measurements.

• Rectangular Small Flat

• Capacity: 450 lbF

• Pull testing of wire, rope, and yarn
• Force capacity: 1,000 lbF (5 kN)
• Max. sample size: Ø0.21 in (5.3 mm)
• Weight: 1.8 lbs (0.8 kg)
• Connection: Integrated 5/8" Eye End

• Capacity: 2,000 lbF (9 kN)
• Max. sample width: 2.36 in (60 mm)
• Pyramid (Serrated) Roller

• Compatible with legacy Chatillon scales; CDR, CMA, & CTR

• Force capacity: 5 kN (450 lbF)
• Specimen width max.: Max. 50 mm
• Specimen length max.: Max. 280 mm
• Standards: ASTM-D3330, ASTM-D6862, ASTM-D6252, ASTM-B571, ASTM-D2861

• Roller diameter: 25.4 mm (1 in.)
• Roller width: 25.4 mm (1 in.)

• Force capacity: 1 kN (200 lbF)
• Jaw sizes (mm): 30 x 30, 30 x 50, 30x80, 30x100
• Jaw types: Pyramid, Rubber, V-Jaw and Wave
• Opening: 0-10 mm

• Kit includes R8050 sound level meter, R8090 Calibrator and carrying case.

• ESM301, ESM-DC, TSFM500-DC test stands to Series 7, 5 or 4 force gauges cable

• Measure the noise level of a particular area/location or process.
• Type 2, 30 to 130 dB

• Capacities from 2,500 to 55,000 lbs

• Capacity: 562 lbF

• Capacities: 0.25 to 100 lbF
• Compatible with 3i, 5i, 7i Indicators.

• 0.3% of FS accuracy
• Sampling rate: 1000 Hz
• No outputs

Capacity: 300 lbF

• Force capacity: 250 N (50 lbF)
• Opening: 0 - 3.8 mm (0-0.15 in)
• Weight: 0.04 kg (0.08 lb)