Search Results

Hook attachment for Mark-10 Series E gauges. Series E gauges and attachments use Click-Lock Technology which prevents the attachments from rotating during use.

The Chatillon DFS2-R-ND Indicator has limited availability and is being replaced by the Chatillon DFS3 Series Force Gauges. DFS3 can be used with an external load cell or torque sensor. Contact us for possible availability. If you need flexibility in your applications, the DFS II Series with non-dedicated remote load...

Grasping loop is typically used with the hook with clasp for ergonomic testing. Capacity: 500 lbf

AC1051 Footswitch automates common force gauge and indicator functions for improved testing ergonomics and efficiency, eliminating the need for multiple key presses. Up to three functions, separated by configurable time delays, may be programmed for a single footswitch activation. Applicable commands include: Request currently displayed reading Request real-time reading Request peak...

The JDD Series of high resolution digital display can be paired with a variety of remote sensors and boasts extremely high precision and a simple user interface. Its simple five button user interface makes the JDD Series intuitive and streamlined. Directly from the keypad, the operator can select: units of measure; peak,...

2 inch dial and 8 inch stem 0/220 degrees F Stainless steel heavy duty construction Made in USA NSF certified Re-calibration feature Stock item, ships in one business day

AC1052 and AC1058 force gauge mounting plates are suitable for all Mark-10 force gauges in OEM and custom mounting applications. The plates have an integrated dowel pin, which mates with the blind hole in the rear of Mark-10 force gauge housings. AC1052 mounting plate kit is for force gauges with...

Pistol grip for Mark-10 Series E gauges. Series E gauges and attachments use Click-Lock Technology which prevents the attachments from rotating during use.

Mark-10 AC1007 Table Top Mount Kit for Series R50 torque sensors.

Keypad for DFIS force gauge Old Chatillon part number NC00295 New Chatillon part number SPK-DFIS-002

Stops when specified load has been reached.

Compatible with the Chatillon TCM Motorized Test Stands. Thread Sizes: M6x1.0, M2x1.75, 5/16-18, 1/4-28, #10-32

The Chatillon® CS2Plus digital force testers for tensile compression, peel, flexural and multi-stage testing. The CS2Plus is available in two capacities 200 lbf (CS2+225) and 1000 lbf (CS2+1100). The software is user-friendly. Test setups can be created and saved making it easy for operators to switch to different tests. Two...

These adapters allow a force gauge to be used in inline pull testing or weighing applications. A 5/16-18 threaded hole at each end is axially aligned with the load cell shaft in the force gauge, for mounting hooks or other attachments. Three adapters are offered, accommodating Mark-10 force gauges with capacities up...

R04 Miniature Force Sensor is a compact force measurement sensor for tensile and compressive loads in applications with limited space. The Series R04 is available in capacities from 0.25 to 100 lbF (1 to 500 N). Every capacity has the same miniature dimensions. The sensors feature outstanding mechanical overload protection and...

Battery pack for ACCUFORCE III, IV series gauges Old Chatillon part number ML4461 New Chatillon part number E80-635 Supplied with wire leads only. Requires splicing in connectors from old battery pack.

These grips are designed for securing wire terminals, cables, connectors, and other samples for pull testing. Three wire diameter capacities are available. Use these grips with the G1002 dual roller grip, and choice of test stands and force gauges to create complete terminal and crimp testing system. Specifications Capacity: 200...

The Mark-10 Axial Compensator compensates for axial movement in torque tests of threaded fasteners, bottle caps, etc. The axial compensator has a hex tail which fits into the chuck of a Series R50 or TT03 torque gauge, and includes mounting hardware to mount to a G1053 or G1058 grip.

The CLC Series are full bridge strain gauged load cells complete with 15-pin plug. When connected to a CS Series test machine, the capacity and calibration points are automatically recognized by the machine and it becomes a full-featured load measurement instrument. Accuracy: ± 0.25% full scale of load cell capacity Models and...

Measures 0-60 lbs. in 2.0 lb. increments and kilogram scale. Red indicator needle remains at maximum reading until reset. Includes fitted foam storage box and Two-year warranty. Calibration certificate included with accuracy = 0.6 lb. The Black B&L Engineering Mechanical Pinch Gauge known as the "Gold Standard" in pinch strength (Key,...

This calibration kit is designed to permit the field calibration of a WT3-200, WT3-201, or WT3-201M wire crimp pull tester. | Includes The kit contains a complete set of attachments required to mount the tester to a bench, as well as the necessary brackets to mount weights, as follows: Right-angle bench mounting kit Weight...

Battery pack for Chatillon DFA series gauges. Supplied with wire leads only. Requires splicing in connectors from old battery pack.

SPK-FMG-146 Small Rectangular Flat Compression Fixture Capacity: 500 lbf Connection: 5/16-18

SPK-DF-USB, USB-RS232 Adapter Use to adapt an RS232 9-Pin output to a USB Input | Specifications Connector: USB Connector: 9-pin RS232 Length: 10 in

Yogurt cup peel test fixtures are designed to test peel strength of the foil lid. The following information is needed to quote this type of peel fixture. What are the dimensions of the container? What angle should the yogurt container be held at (30, 45 or variable)? Will you also...

RSU100 converts RS-232 to USB Included Items Adapter, RS-232 to USB Includes a 6' cable Documents RSU100 User's Guide

V- groove attachment thread onto force gauges for compression testing of round or odd shaped samples. Contact us to learn more about force gauge attachments

Power supply for CS225 and CS1100 touchscreen. This is for the original CS tablet, not the newer model that has the computer that can be flipped over to be a touchscreen. If you are unsure if this is the correct power supply for your CS touchscreen, please call us and we...

Battery pack for Chatillon DFM series gauge. Old Chatillon part number NC000998 New Chatillon part number SPK-DFM-058 Supplied with wire leads only. Requires splicing in connectors from old battery pack.

Posts with 1.25", 2.5" and 4" lengths. Extended lengths for taller bottles. Works with Series TT01 Cap Torque Tester, Series R53 Torque Tester and G1058 Universal Cap Grip. Model Description CT004 Spare set of posts for TT01 / R53, 1.25" length, set of 4 CT005 Set of posts for TT01 / R53, 2.5"...

The Chatillon DFS-II-R Series force gauges have replaced by the Chatillon DFS3 Series Force Gauges. The DFS II Series with dedicated remote load cells is the ideal solution for applications that require a measurement where there is no room for the gauge. The gauge may be handheld our remotely mounted and...

The Mark-10 MR50 Torque Sensor measure bi-directional torque for a wide variety of applications. Contains a chuck for samples up to 1/2" (12.7 mm) in diameter, depending on capacity. The sensor can be used as a hand held device, or mounted to a torque test stand. Capacities available from 10 ozFin to 100 lbFin...

Adapters to mount competitor force gauges to Mark-10 test stands, and Mark-10 gauges to competitor test stands. These adapters are made to certain thicknesses for proper axial alignment. Note: When ordering models AC1020 through AC1025 with an ES10 or ES20 test stand, the optional AC1060 mounting plate is suggested. This...

Optional extended jaws for G1100 parallel jaw / vise-action grip. AC1070-1 Pair of jaws, G1100, 2.36” lengthAC1070-2 Pair of jaws, G1100, 3.94” length Documents Mark-10 Grips Catalog

ENC0157 Mitutoyo Cable Use to interface an RS232 9-Pin output to a 10-Pin Mitutoyo Input. | Specifications Connector: 10-pin Mitutoyo Connector: 9-pin "D" RS232 Cable Length: 6 ft

G1107 Snap Hook includes a clasp and has a swiveling action to provide proper alignment. Features and Specifications Capacity: 500 lbF [2,500 N] Weight: 0.3 lb [0.14 kg] Included Items G1030 5/16-18M to #10-32F adapter 5/16-18 M/M stud with jam nuts #10-32 M/M stud with jam nuts Dimensions in

Used to determine the opening force of flat folded cartons along their score lines. Ideal for numerous applications in the packaging, food and beverage, medical device, consumer products, and many other industries.Upper and lower fixtures are easily removable.Use this fixture with a choice of test stand and force gauge to create...

Calibration (Min-Max): 0 - 30 PSI Face Size: 2 IN Fitting Size: 1/8 IN P500K 0-30 PSI 1/8" NPT PRESSURE GAUGE D588326 Contact us to learn more about pressure gauges

Circular padded attachment for Mark-10 Series E gauges. Series E gauges and attachments use Click-Lock Technology which prevents the attachments from rotating during use. Diameter: 3 inches Thickness: .5 inches

The Mark-10 MR51 Torque Sensor measure bi-directional torque for a wide variety of applications. Contains a chuck for samples up to 1/2" (12.7 mm) in diameter, depending on capacity. The sensor can be used as a hand held device, or mounted to a torque test stand. Capacities available from 10 ozFin to 100 lbFin...

Series TT03C digital cap torque gauges are quick and economical solutions for basic handheld cap torque testing. These portable instruments eliminate the need to secure closures in a fixture or more elaborate testing system. A dedicated remote torque sensor with Jacobs chuck is supplied with a universal grip for caps from 0.65 - 1.55...

Keypad for Chatillon TCD-200 test stand. Old Chatillon part number NC000768 New Chatillon part number SPK-FM200-030

Battery pack for Chatillon DFG, DFGS, DFGS-R-XX, DGG, DGGS, DTG, DTGS and CSD500 series gauges. Old Chatillon part number NC000522 New Chatillon part number SPK-DFGS-026 Supplied with wire leads only. Requires splicing in connectors from old battery pack.

MR06-200 wire crimp pull sensor is a hand operated tester for measuring wire crimp pull-off forces. The ergonomic handles and convenient tensioning mechanism make field measurements a breeze for applications up to 200 lbF (1,000 N). Squeeze the handles together to increase tension on the sample until a break occurs. The peak force...

Clevis grip designed for various tension testing applications, including extension spring testing, chain link break force testing, and other applications. A spring loaded pin with ball plunger locks into place, for added safety during pull testing. Includes an integrated eye end, and requires an eye end adapter to mount to Mark-10...

SPK-FMG-144 Palm Fixture Capacity: 500 lbf Connection: 5/16-18

Battery pack for Chatillon DFS2, DFS2-R and DFE2 series gauges and indicators.

The CHATILLON® TLC Series load cells are compatible with Chatillon test stands TCD110, TCD225 and TCD1100. Contact us to learn more about test stands | Features and Specifications Compatible with TCD225 and TCD1100 Test Stands. Accuracy: .25% of full scale (non-dedicated) .1% of full scale (dedicated) dedication requires calibrating load cell...

Capacity: 500 lbF Connection: 5/16-18F

This set of fixtures is used to produce a 90° bend in fiber board materials and plastics. The fixtures are compliant to TAPPI standard T829 for evaluating the relative quality of scores in corrugated containers. Features Set of upper and lower dies produce 90° bend in corrugated board and plastics Meets...

Capacity: 500 lbF Connection: 5/16-18 Part number: SPK-FMG-010B

Capacity: 500 lbF Connection: 5/16-18 Part number: SPK-FMG-011B