All Products

• Compatible with legacy Chatillon scales; CDR, CMA, & CTR

• 0.3% of FS accuracy
• Sampling rate: 1000 Hz
• No outputs

Puncturing gypsum board and other materials to determine puncture resistance

• Dies A, B, C, D
• 12x59, 6x59, 6x33, 3x33 mm

• Type I, II, IV, V
• 13x57, 6x57, 6x33, 3.18x9.53 mm

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

• Motorized
• Wire gauge range: AWG30 – AWG3
• Force Capacity: 200 lbF (1 kN)

Accessory for WT205 Manual Wire Crimp Tester and WT205M Motorized Wire Crimp Tester

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 35 mm male eye end with 13 mm pin
• Compatible with Shimadzu 50 kN test stands

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 35 mm male eye end with 13 mm pin
• Compatible with Shimadzu 50 kN test stands

• Quick-action lever operation
• Wire gauge range: AWG30 – AWG3
• Force Capacity: 200 lbF (1 kN)

Bluetooth connectivity to software

• Flexible packaging and battery separator film
• Opening: 10 mm Ø
• Probe:  0.8 mm Ø
• Max specimen thickness: 3 mm

• Compatible with Chatillon Force Gauges

• Tensile force: 1 kN
• Clamping force: 2 kN (horizontal) at 7 bar
• Opening: 0-6 mm

• Tensile force: 2 kN / 7 bar
• Clamping force: 1.9 kN
• Sample size: 0-2 mm

• 1.25" (317 mm mm) male eye end, 1/2" (12.8 mm) pin
• 35 mm male eye end, 13 mm pin
• Compatible with Shimadzu 50 kN test stands

• Conduct jump analyses, assess balance, measure power and strength, and make better-informed return to sport determinations with these three axis force plates.

• Conduct jump analyses, assess balance, measure power and strength, and make better-informed return to sport determinations with these larger format force plates.

• Load capacity: 2,000 lbf (10 kN)
• Body: Steel
• Span: Adjustable from 4 mm -170 mm

• The K-Force Plates Frame is an accessory designed to enhance the functionality of KINVENT's lightweight K-Force Plates

• The K-Grip accessory can be attached to the K-Grip to more easily accommodate a greater variety of hand sizes

Monitor muscle activation and gather data about muscle distribution with this pack of two portable, non-invasive EMG sensors.

Progress patients through a rehabilitation plan – and keep them motivated along the way – with this bundle of revolutionary devices.

• Capacities ranging from 50 lbs to 10,000 lbs.
• Load is applied against a hardened ball which rotates to maintain vertical alignment as pressure increases.

Get the entire KINVENT ecosystem in one convenient pack.

Take your approach to physical therapy or athletic training to new heights with this pack of KINVENT’s most popular devices.

Generate granular, quantitative data – and keep patients and clients engaged – with this pack of advanced biofeedback tools.

Level up your approach to physical therapy or athletic training with these popular biofeedback devices.

• Capacities ranging from 50 lbs to 10,000 lbs.
• Load is applied against a hardened ball which rotates to maintain vertical alignment as pressure increases.

Get to know KINVENT with this bundle of popular and versatile devices.

• 5/8" [15.8 mm] male eye end with 8 mm pin
• M20 x 1.5 mm male thread

Bluetooth connectivity to software

• 5/8" (15.9 mm) female eye end, 8 mm pin
• 12 mm female eye end, 6 mm pin