All Products

• Capacity: 1000 lbF
• Max Travel: 3.5 in
• Extended Column Available

• Capacities: 10 to 20,000 lbF
• Compatible with JDD Digital Display

Measures air velocity, air temperature, ambient temperature, relative humidity, light and contact temperature

• Measure the noise level of a particular area/location or process.
• Type 2, 30 to 130 dB

• Measure the noise level of a particular area/location or process.
• Type 2, 30 to 130 dB

• Capacities from 2,500 to 55,000 lbs

• Capacities from 500 to 20,000 lbs

• Measures Gauge & Differential Pressure
• Capacity: 100 psi

• 5/8" [15.8 mm] male eye end with 8 mm pin
• #10-32, 1/4-28 or 1/2-20 thread

• Measures Gauge & Differential Pressure
• Capacity: 30 psi

• Secures a fixture or sample during torque testing
• Torque capacity: 100 lbFin (11.3 Nm)

• Accessory for Mark-10 ESM1500/ESM750 Test Stands

• Base Plate for ESM1500, ESM750

• Base Plate for ESM1500, ESM750

• Options for ESM1500/ESM750

• Includes Hand Dynamometer, Pinch Gauge and Goniomter

• Capacity: 150 lbF
• Max Travel: 6 in
• Extended Column Available

• Capacity: 500 lbF
• Max Travel: 6 in
• Extended Column Available

• 1", 2.5", 4" length posts

• Adapter shafts for Chatillon Series DFE II, DFS II, DFE, DFS, DFIS force gauges.

• Capacity: 562 lbF

• Compatible with DFGS-R-ND / DFA-R-ND (These are indicators that are no longer made)

• Capacities from 2,500 to 25,000 lbs

• Capacities from 500 to 20,000 lbs

• Compatible: DFX2 Gauge

• Capacities from 10 ozFin to 100 lbFin
• Used with 3i, 5i, 7i Indicators

• Capacities from 10 ozFin to 100 lbFin
• Used with 3i, 5i, 7i Indicators

• Capacities from 10 ozFin to 100 lbFin
• Used with 3i, 5i, 7i Indicators

• Capacities: 0.25 to 100 lbF
• Compatible with 3i, 5i, 7i Indicators

• Capacities: 100 to 10,000 lbF
• Compatible with 3i, 5i, 7i Indicators

• Capacities: 0.25 to 100 lbF
• Compatible with 3i, 5i, 7i Indicators.

• Capacities: 50 to 10,000 lbF
• Compatible with 3i, 5i, 7i indicators

• For TCM & LTCM

• T-Slot Table for TCM

• Multi Thread Plate for TCM

• Capacity: 100 & 350 lbF
• Basic force testing
• Force gauge based tester

• Compatible with Chatillon Force Gauges

• Connection: #10-32F Thread and 5/16 Hex
• Capacity: 100 lbfin [11.3 Nm]
• Opening Diameter: 0.65 in to 1.55 in.

• Testing small diameter round samples like pins, rods, wires
• Capacity: 30 lbf [200 N]