Search Results

The Eye End Adapter (A317-5818F) is designed to connect grips, fixtures, and accessories to force test stands and universal testing machines (UTMs). Featuring a 1.25 in. male eye end on one side and a 5/8-18 internal thread on the other, it provides a secure mechanical interface between test frames and load-bearing attachments. Eye...

Air connection kit Consists of a complete set of components needed to connect two pneumatic grips: - Coiled tubing, 1/8" OD, 1/16" ID, 8" retracted length (qty. 2) - Y-splitter (qty. 1) - Straight tubing, 1/8" OD, 1/16" ID, 5' length (qty. 1) - Elbow fitting, tubing termination (qty. 2)- Elbow fitting, tubing to #10-32M...

Mounting kit for Mark-10 digital indicators or Series TT03 torque gauges to a TS Series manual test stand. AC1004 is compatible with TSA750 / TSA750H TSB100 TSC1000 / TSC1000H TSF / TSFH TST / TSTH Typically used in combination with an AC1018 load cell mounting kit.

Maintain precise alignment and consistent load distribution with this self-aligning compression plate. Automatically compensate for sample angle variations, ensuring perfect parallelism and complete contact; essential for testing low-deflection springs and high spring-rate materials. This compression plate features a 5/8" integrated eye end, the standard eye end size for Lloyd Instruments, Chatillon,...

Capacity: 100 lbF Connection: #10-32 Part number: SPK-FMG-011A

Serial cable, gauge to RS-232, DB-9. The length of the cable is 6 ft. Compatible Instruments Force gauges: Series 7, 5, 4 Digital Indicators: 7i, 5i Torque gauges:, TT01, TT02, TT05, Wire pull tester: WT3-201(M)

The HOGGAN wireless ErgoFET™ 500 is a digital force gauge that allows professionals in ergonomics, engineering, and safety to objectively assess and quantify human and product performance. This is beneficial for improving product quality and functionality, as well as increasing manufacturing efficiency and reducing costs associated with repetitive motion injuries and...

The microFET Pinch Gauge is a digital pinch dynamometer designed to accurately measure tip, key, and palmar pinch strength. Its digital display ensures precise, repeatable results, and the new Bluetooth wireless capability eliminates cords for greater convenience. Compatible with both microFET and FDC Data Collection software, it’s ideal for clinical and...

Bezel & Crystal for LG and DG mechanical force gauges.

The 3i digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors. With exclusive Plug & Test™ technology, all calibration and configuration data is saved within the sensor’s smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are...

These kits make job task analysis and ergonomics analysis simple and accurate, ideal for workplace design, strength assessment, and ergonomic studies. These kits present the ergonomist and other professionals with a simple and economical testing solution. Contact us to learn more about force gauges Features & Specifications Accuracy: +/-0.3% of full...

Clevis pins for eye end adapters. Specifications Material: Hardened steel 56 HRC, nickel-coated Temperature range: -70 … +350°C Included Items (1) Clevis pin Dimensions - mm Model A B PIN239-6-50 5.98 50 PIN239-8-50 7.98 50 PIN239-8-80 7.98 80 PIN239-12.7-80 12.68 80

One Gallon AAA Tester Oil for AMETEK Dead Weight Tester Type "T", "R", "HL", T-620 pumps. Documents AAA Oil MSDS Contact us to learn more about deadweight testers

The Black B&L Engineering Mechanical Pinch Gauge known as the "Gold Standard" in pinch strength (Key, Tip, and Palmar) measurement. It is used by physicians and therapists in clinics and rehabilitation centers worldwide. Measures 0-60 lbs. in 2.0 lb. increments and kilogram scale. Red indicator needle remains at maximum reading...

AC1046-1 eye end adapter kit convert threaded connections on grips and fixtures to an eye end connection. mount to force gauge threaded connections. They have 5/8" [15.8 mm] diameter which is commonly used with test frames, load cells, grips, and force gauges. Eye end adapters provide a commonly accepted industry method...

This grip is designed for ergonomic assessment, spring testing, and other pull testing applications. A spring loaded pin with ball plunger locks into place, for added safety during testing. Specifications Capacity lbf : 500 [2,200] Weight: 0.29 lb [0.13 kg] Shipping weight: 1 lb [0.5 kg] Included Items (1) Clevis Grip Adapters: (1)...

Puncture fixture to test slow rate penetration resistance of flexible barrier films and laminates according to ASTM-F1306. The purpose of this test is to simulate real-world conditions where packaging films may experience gradual puncture forces, such as during handling, storage, or transportation. This grip is designed to mount on a standard...

Series FS06 force sensors measure tension and compression forces. Designed to accommodate bulkier grips and fixtures, they are compatible with Series F test frame models up to 500 lbF / 2.2 kN.With Plug & Test® technology, all configuration and calibration data is saved within the sensor, allowing it to be calibrated on...

Test frame-mounted 4-port USB hub improves cable management and conveniently accommodates peripherals, such as a flash drive, barcode scanner, etc. Compatible with all Series F IntelliMESUR test frames including F105-IM(T), F305-IM(T), F505-IM(T), F755-IM(T), and F1505-IM(T). Specifications Ports: (4) USB A ports, (1) USB B port HS Code: 9024900000 ECCN: EAR99 Country of origin: USA

The V-Notched Beam Shear Test Fixture is designed for evaluating the shear properties of composite materials in accordance with Composite Materials Engineering ASTM D5379 (the Iosipescu method) test requirements. Commonly used for testing fiber-reinforced composites, laminates, and advanced engineered materials, the fixture provides accurate and repeatable shear loading through the...

The Mark-10 Series 7 (M7) Digital Force Gauge is designed for precise measurements of tension and compression in applications up to 500 lbF (2500 N). With ±0.1% accuracy and a sampling rate of 14,000 Hz, it provides reliable readings in even the quickest tests.Series 7 gauges include all the functions of Series 5 gauges,...

NC000654 Mitutoyo Cable Use to interface an RS232 9-Pin output to a 10-Pin Mitutoyo Input. | Specifications Connector: 10-pin Mitutoyo Connector: 9-pin RS232 Cable Length: 5 ft

This fixture is designed for peel testing of tapes, films, foil seals, and other materials, per ASTM D6862 / D3330. A large, flat working table moves horizontally as the test stand’s crosshead moves up via direct cable linkage.An optional adjustable-angle mount tilts the fixture up to ±30°. Another optional adapter uses an...

The TAPPI T821 Pin Adhesion Fixture is designed for evaluating the bond strength between the liner and medium in corrugated board, as described in TAPPI T821. This fixture securely holds the sample between arrays of pressure pins to accurately measure the internal bond. This test helps manufacturers ensure good adhesive...

AC charger compatible with Hoggan microFET2, microFET3, microFET HandGRIP, ergoFET, ergoFET500. AC/DC wall mount adapter 5V 5W.

The Mark-10 MF100 USB Sensor Interface bridges your strain gage–based load cells, force sensors, and torque sensors directly to your PC or USB hub. Engineered for seamless integration, this adapter works in tandem with MESUR®Flex configuration software to deliver real-time data acquisition and sensor management. Ideal for precision testing applications...

Designed for wire, rope, and yarn pull testing applications. Secures the free end of the sample via a bollard and vise with rubber-faced jaw. The capstan rollers generate a slow notch free stress relief to prevent the breakage of the specimen in the clamping area. This grip is designed to mount on...

The Eye End Adapter (A317-191) is designed to connect grips, fixtures, and accessories to force test stands and universal testing machines (UTMs). Featuring a 3/4 in. female eye end on one side and a 31.7 male eye end on the other, it provides a secure mechanical interface between test frames and load-bearing attachments....

For those seeking even more functionality than the K-Deltas, the K-Deltas XL force plates offer the same impressive features but in a larger format—49 x 810 x 470 mm—and with enhanced acquisition frequency. The larger surface area of the K-Deltas XL allows for even more versatility during dynamic activities and balance assessments, especially...

KINVENT K-FORCE PLATES Lightweight Force Plates are an ideal tool for measuring static and dynamic balance in a variety of movements such as stances and squats. Its sturdy construction and lightweight design make it perfect for both assessment and exercise involving proprioception, and its portability ensures its utility in both the...

This Eye End Adapter, A158-2510, allows for efficient conversion from a 5/8" female eye end on a grip to a 25 mm eye end connection on the Shimadzu 10 kN and 20 kN test stands and load cells. Eye end adapters ensure a secure and reliable mounting of grips. Compatible with Shimadzu 10 kN...

Eye ends are used on most universal testing machines, motorized test stands and some manual test stands. These ends can be used to convert from one size of an eye end to another allowing more options for grips that can be mounted. Specifications Connection: 5/8" [15.8 mm] male eye end...

This hardened steel fixture has a 6 mm (1/4 in) retractable jaw with serrated teeth for extra gripping power. Jaw opens to 5.56 mm (0.22 in) to accept wire gauges up to #10 heavy duty. Ideal for rapid, semi-automatic testing of wire, filaments, fibers and cable. Capacity: 2 kN [450 lbf] Thread: 5/16-18F...

This Eye End Adapter will connect a grip or fixture with a 5/8" eye end to a 1.25" female eye end connection. Eye end adapters ensure a secure and reliable mounting of grips. Specifications Connection: 5/8" (15.8 mm) male eye end, 8 mm pin Connection: 1.25" [31.8 mm] female eye end with 12.8 mm diameter...

Pneumatic grip designed for wire, rope, and yarn pull testing applications. Secures the free end of the sample via a bollard and pneumatic vise. The capstan rollers generate a slow notch free stress relief to prevent the breakage of the specimen in the clamping area. This grip is designed to mount on...

Wedge grips can be used in a variety of tensile testing applications. They can be used for tensile testing of wires, plastics, metals, elastomers and more. The initial gripping of the sample is done by the jaws tightening as the wedge grip body moves upwards as the handle is rotated. This...

ERG1-P eccentric roller grips are self-tightening grips designed for testing flat samples, rubber, plastic film, plastic dumbbells, paper, cardboard, sheet metal and foils. The roller on this grip has a crosscut surface. Fits standard 5/8" eye ends—ready to use with Lloyd, Chatillon, and Mark-10 systems. Need the full setup? We carry...

ML4242 replacement jaw kit including jaws and springs for the Chatillon ML1700 wedge grip. Included Items (2) Jaws (2) Springs

Battery pack for Chatillon DFG, DFGS, DFGS-R-XX, DGG, DGGS, DTG, DTGS and CSD500 series gauges. Old Chatillon part number NC000522 New Chatillon part number SPK-DFGS-026 Supplied with wire leads only. Requires splicing in connectors from old battery pack.

This eye end adapter can be used to mount a grip or fixture that has a 5/8" eye end to an Instron Type O fitting. The grips and fixtures on JLWforce.com will either have a threaded connection, 5/8" eye end connection or 1.25" eye end. This adapter will mount a grip with a 5/8" eye end...

Many of the grips use a 5/8" eye end. The AC1047-1 eye end adapter can be used to mount grips that have a 5/8" eye end to a test stand that has a 5/16-18F connection. Where used: Mark-10 Motorized Test Stands Base ESM303 ESM301 ESM750, if using AC1055 optional base plate ESM1500, if using...

Eye ends are used on most universal testing machines, motorized test stands and some manual test stands. These ends can be used to convert from one size of an eye end to another allowing more options for grips that can be mounted. Specifications Connection: 31.7 mm diameter male eye end...

USB cable, type C to A. This cable is used with the EasyMESUR test stand controller.

A pressure-sensitive probe tack test fixture using an inverted probe, as described in ASTM D2979, is designed to measure the tack, or instantaneous adhesion, of pressure-sensitive adhesives under controlled contact conditions when used along with a Universal Testing Machine. In this configuration, the adhesive sample is mounted facing downward on a flat support,...

The Mark-10 G1011 Rubber Tip attachment is designed to simulate a finger for testing push-buttons, membrane switches, etc. | Specifications Connection: #10-32F Thread Capacity: 50 lbf [200 N] Includes a #10-32M/M stud with jam nuts. | Dimensions | Documentation Mark-10 Grips Catalog

Secures round objects during torque and force testing. Reversible serrated jaws can accommodate samples with diameters of 0.65 - 1.55 in [16.5 - 39.4 mm]. This grip can be used either manually with an R50 torque sensor or TT03 torque gauge, or in test stand controlled applications with the TSTM-DC torque test...

V- groove attachment thread onto force gauges for compression testing of round or odd shaped samples. Contact us to learn more about force gauge attachments

Attachment kit includes a hook, flat, V-groove, point, chisel, and extension rod. Contact us to learn more about force gauge attachments Attachments for force gauges under 20 lbF AC1131-1 Attachment Kit Included Items (formerly 23-1031-1) G1028 Small hook, #10-32F G1029 Flat head, #10-32F G1026 Cone, #10-32F G1025 Chisel point, #10-32F G1027...

Reliable, Accurate, and Efficient Force Measurement for Quality-Driven Applications The Chatillon DFX3 Series Digital Force Gauge is engineered for professionals who require dependable and precise force measurement across a variety of testing environments. Whether used handheld or mounted on a test stand, the DFX3 delivers consistent, traceable results with minimal setup—helping teams...

The lever operated Force Measurement Test Stand Model TSB100 is an economical solution for quick-action tensile testing and compression testing of up to 100 lbF (500 N) of force. Constructed of rugged components, this test stand is durable enough for the factory floor, yet precise enough for laboratory environments. Contact...

This fully enclosed, air-powered grip is ideal for seal strength testing of packaging, elongation testing of various materials, and other tensile testing requirements, per ASTM F88 / D1876. Serrated interlocking jaws effectively grip samples for up to 100 lbF (500 N) of force. The grip features an industry-unique integrated open/close valve...

Upgrade your production with the Series TT02 Torque Tool Tester. This compact yet durable device offers precise and reliable evaluations for manual, electric, and pneumatic torque tools. Its universal 3/8” square receptacle and advanced technology can detect 1st and 2nd peaks to provide comprehensive and accurate results.The TT02 Torque Tool...