Search Results

T-250 Seal Kit for Ametek type T & Ametek type R Dead Weight Tester Pump. Kit Includes Part Number Description Quantity 10-90001 O'RING BUNA N -007 T-152 -007 4 10-90002 O'RING BUNA N -008 1 10-90004 O'RING BUNA N -010 1 10-90005 O'RING BUNA N -011 4 10-90006 O'RING BUNA N -012 1 10-90009 O'RING BUNA N -906 4 10-90010 O'RING BUNA N -038 2 10-90011...

Interface cable for communication between Mark-10 force gauges and test stands. 32" retracted length. Compatible Instruments Force Gauges: Series 7, 5, 4 Test Stands: ESM301(L), ESMH-DC, TSFM500(H)-DC, ESMH-DC

The perfect solution for measuring physical performance, use the K-Deltas to manage athletes’ return to sport or to help them increase their performance. K-Deltas are especially useful in ACL rehabilitation. Thanks to the design of these advanced force plates, their load capacity and their high sampling rate, the K-Deltas measure...

Calibration weights for calibrating force gauges, load cells, torque instruments and more. Use these slotted weights with hanger weights for suspending weights. Rice Lake cast iron weights undergo a special phosphatizing process in which the metal is thoroughly cleaned and mildly etched to allow exceptional finish adhesion. The weights are then...

Hanger weights to be used with slotted calibration weights for calibrating force gauges, load cells, torque instruments and more. Part Weight ASTM Class Dimensions Capacity 12825 1 lb 7 9-5/16" Long 200 lb 12830 1 lb 7 22" Long 200 lb

These grips are ideal for cleanroom, medical, or pharmaceutical testing environments where contamination control is essential. The A4 (AISI 316) stainless steel construction provides a smooth, non-reactive surface that’s easy to sterilize and resistant to corrosion, ensuring reliable, hygienic performance in sterile or controlled settings. Stainless steel tensile grips feature a side-action,...

This sound calibrator generates a stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter. The R8090 is compatible with all 1/2" diameter microphones. Features Generates stable acoustic signal at a controlled frequency and amplitude to verify sound level meter accuracy Accommodates sound meters with...

Thread adapters for force gauge, load cells, and test stands. Part Number From To 1 3127 #10-32M #10-32M x 3/16" 2 3157 #10-32M #10-32M x 3/4" 3 NC002686 5/16-18M 5/16-18M x 1" 4 P-10020 5/16-18M #10-32F 5 P-10269 #10-32M 5/16-18F 6 17039 #10-32M 1/4-28M 7 NC000686 #10-32M 5/16-18M 8 NC000296 1/4-28M 5/16-18M 9 17162 1/2-20M 5/16-18M 10 17160 #10-32F #10-32F 11 17057...

The JSB Series S-Beam Load Sensors offer an outstanding price/performance ratio with full scale capacities from 10 to 20,000 lbf [50 N to 89 kN]. These sensors afford the operator reliable measurement in both tension and compression. Accuracy: +/-0.25% of full scale Safe Overload Sensors with capacities under 225 lbF: 500%...

Connect common strain gage-based load cells, force sensors, and torque sensors to Mark-10 7i, 5i, and 3i indicators with these user-configurable adapters. Compatible with strain gage-based load cells, force sensors, and torque sensors Screw terminal block allows for easy connection of sensor wires Configure sensor capacity, resolution, and identification number...

Optional functions for Mark-10 motorized test frames F105-EM, F305-EM, F505-EM. Any of the below functions may be purchased at time of order or may be enabled in the field at a later date through a code activation process. A complete options package (EMP-COMP-1) is also available, including all of the below features at...

Capacity: 100 lbF Connection: #10-32 Part number: SPK-FMG-012A

These vice grips are used in tension testing on force test stands and material test systems. Pyramid (crosscut), rubber, wave, or v-jaws are included. A choice of 30 mm, 50 mm, 80 mm and 100 mm widths for the jaws. The dual screw design accommodates samples up to 30 mm thick....

Mark-10 AC1006 Table Top Mount Kit for Series R52 torque sensors. Dimensions

The Mark-10 Steel Compression Plates offer 2.2 and 3.78 inch diameters. They are perfect for compression testing springs, foams, and other materials. Internal concentric circular grooves allow for easy sample centering. This compression plate features a 5/8" integrated eye end, the standard eye end size for Lloyd Instruments, Chatillon, and Mark-10...

Simple task analysis and ergonomics analysis testing kit at an economical price. Ideal for workplace design, strength assessment, and ergonomic studies. Contact us to learn more about force gauges | Features and Specifications Capacity: 200 lbF [1 kN] and 500 lbF are available Real-time and peak force values Accuracy: +/-0.5% of...

This handheld dynamometer is used by physicians and clinicians to reliably measure muscle strength. This measurement can then be used to evaluate the progress of the rehabilitation program by repeated testing. Contact us to learn more about push pull force gauges Features and Specifications Capacity: 500 lbF [2.5 kN] Accuracy:...

Measures isometric grip force and strength increases in rehabilitation and physical therapy programs. Adjustable handle that allows user to quantify grip strength for different sized objects. Features and Specifications Measures from 0-200 lbs or 90 kgs Accommodates small and large hand sizes, with five grip positions from 1.375" to 3.375"...

The Reed R3030 digital manometer measures gauge and differential pressure up to 30 psi. Provides accurate measurements in 11 different units of measure and is capable of taking gauge and differential pressure. Internal memory of the Reed R3030 captures maximum and minimim measurements. | Features Measures gauge and differential pressure up...

JL Series are mechanical force gauges for testing push and pull force. They are easy to operate and portable. Single click on a knob on the device will convert from peak force to tracking mode. Capacities available range from 5 lbF to 100 lbF. Contact us to learn more about force gauges...

Wedge grips can be used in a variety of tensile testing applications. The WG243-20 comes with pyramid jaw faces and can be used up to 20 kN force. Easy clamping and unclamping action makes specimen loading faster. Self-tightening wedge design eliminates slippage. Can be used for tensile testing of wires, plastics,...

Approved alternative battery charger for Chatillon gauges and indicator series for US outlets (110V): DFX, DFE, DFS, DFS-R-ND DFX II (DFX2), DFE II (DFE2), DFS II (DFS2), DFS2-R- ND Contact us to learn more about force gauges

Wedge grips can be used in a variety of tensile testing applications. The WG256-10 comes with pyramid jaw faces and can be used up to 10 kN force. Easy clamping and unclamping action makes specimen loading faster. Self-tightening wedge design eliminates slippage. Can be used for tensile testing of wires, plastics,...

Eye ends are used on most universal testing machines, motorized test stands and some manual test stands. These ends can be used to convert from one size of an eye end to another allowing more options for grips that can be mounted. Specifications Connection: 12 mm diameter male eye end...

This eye end can be used to mount a grip that has #10-32F thread to some Instron test stand or load cells. For example attaching a G1008 paper and film grip, or a G1062 miniature wedge grip to an Instron 6.0 mm Clevis Pin (Type Of). Eye ends are used on most universal...

Eye ends are used on most universal testing machines, motorized test stands and some manual test stands. These ends can be used to convert from one size of an eye end to another allowing more options for grips that can be mounted. Specifications Side A: 1.25" [31.7 mm] male eye...

Eye ends are used on most universal testing machines, motorized test stands and some manual test stands. These ends can be used to convert from one size of an eye end to another allowing more options for grips that can be mounted. Specifications Side A: 5/8" [15.8.7 mm] male eye...

This Eye End Adapter will connect a grip or fixture with a 5/8" eye end to an M12x1.75 threaded connection. Eye end adapters ensure a secure and reliable mounting of grips. Specifications Connection: 5/8" (15.8 mm) male eye end, 8 mm pin Connection: M12x1.75 female thread Load Capacity: 20 kN Material: Steel, nickel-plated Included...

This Eye End Adapter, A158-35, allows for efficient conversion from a 5/8" female eye end on a grip to a 35 mm eye end connection on the Shimadzu 50 kN test stands and load cells. Eye end adapters ensure a secure and reliable mounting of grips. Compatible with Shimadzu 50 kN test stands. Specifications...

This Eye End Adapter will connect a grip or fixture with a 5/8" eye end to a M30x2 male thread connection. Eye end adapters ensure a secure and reliable mounting of grips. Specifications Connection: 5/8" (15.8 mm) male eye end, 8 mm pin Connection: M30x2 male thread Load Capacity: 20 kN Material: Steel, nickel-plated Included...

This adapter can be used to mount a grip or fixture that has a 5/8 inch eye end to a load cell or test stand that uses a 2.5 clevis pin fitting. Eye ends are used on most universal testing machines, motorized test stands and load cells. These eye ends can be used to...

Eye ends are used on most universal testing machines, motorized test stands and some manual test stands. Specifications 5/8" [15.8 mm] male eye end to M16x2 thread Material: Steel, nickel-plated Included Items 1 Adapter 2 Locking nuts 1 Pin Dimensions

This Eye End Adapter, A158-35, allows for efficient conversion from a 5/8" female eye end on a grip to a 35 mm eye end connection on the Shimadzu 50 kN test stands and load cells. Eye end adapters ensure a secure and reliable mounting of grips. Compatible with Shimadzu 50 kN test stands. Specifications...

This Eye End Adapter, A318-20, has a 1.25" female eye end and a 20 mm female eye end. Eye end adapters ensure a secure and reliable mounting of grips. Specifications Connection: 1.25 in. [31.8 mm] female eye end with 1/2 in. [12.8 mm] pin hole Connection: 20 mm female eye end with 8 mm...

The Eye End Adapter (A158-M10) is designed to connect grips, fixtures, and accessories to force test stands and universal testing machines (UTMs). Featuring a 5/8 in. male eye end on one side and a M10x1.5 external thread on the other, it provides a secure mechanical interface between test frames and load-bearing attachments. Eye...

Cardan joint adapter swivels for proper sample alignment. Specifications Connection: 5/8" [15.8 mm] male eye end with 8 mm pin Connection: 5/8" [15.9 mm] female eye end with 8 mm pin Load Capacity: 30 kN Material: Steel, nickel-plated Included Items (1) Adapter (1) Locking rings (2) Clevis pins

This Eye End Adapter, A158-16, allows for efficient conversion from a 5/8" female eye end on a grip to a 16 mm eye end connection on the Shimadzu 100 N and 5 kN test stands and load cells. Eye end adapters ensure a secure and reliable mounting of grips. Specifications Connection: 5/8" (15.8 mm) male eye...

This Eye End Adapter will connect a grip or fixture with a 5/8" eye end to a M12x1.75 male thread connection. Eye end adapters ensure a secure and reliable mounting of grips. Specifications Connection: 5/8" (15.8 mm) male eye end, 8 mm pin Connection: M12x1.75 male thread Load Capacity: 20 kN Material: Steel, nickel-plated Included...

This Eye End Adapter will connect a grip or fixture with a 5/8" eye end to a M20x1.5 male thread connection. Eye end adapters ensure a secure and reliable mounting of grips. Specifications Connection: 5/8" (15.8 mm) male eye end, 8 mm pin Connection: M20x1.5 male thread Load Capacity: 20 kN Material: Steel, nickel-plated Included...

This Eye End Adapter, A158-8, allows for efficient conversion from a 5/8" female eye end on a grip to an 8 mm eye end connection. Eye end adapters ensure a secure and reliable mounting of grips. Specifications Connection: 5/8" (15.8 mm) male eye end, 8 mm pin hole Connection: 8 mm female eye end, 3 mm pin...

The CLC Series are full bridge strain gauged load cells complete with 15-pin plug. When connected to a CS Series test machine, the capacity and calibration points are automatically recognized by the machine and it becomes a full-featured load measurement instrument. Accuracy: ± 0.25% full scale of load cell capacity Contact us...

Single-handle grips used for mounting a Mark-10 Series 2 and Series 3 Force Gauge in various applications, such as ergonomics testing, job task analysis, and muscle strength evaluation. Handles are included with Mark-10 ergonomics testing kits.

Bollard grip assembly AC1134 for WT-205M Motorized Wire Crimp Pull Tester and WT-205 Manual Wire Crimp Pull Tester. Secures the free end of the sample via a bollard and vise. Based on the model G1102 grip.

The Eye End Adapter (A158-5818) is designed to connect grips, fixtures, and accessories to force test stands and universal testing machines (UTMs). Featuring a 5/8 in. male eye end on one side and a 5/8-18 external thread on the other, it provides a secure mechanical interface between test frames and load-bearing attachments. Eye...

99-90014 Oil Reservoir for AMETEK/M&G Dead Weight Tester Contact us to learn more about deadweight testers

Our ASTM D638 sample cutter die enables consistent preparation of dogbone-shaped specimens for tensile testing of plastic and polymer materials. This die conforms strictly to the dimensional requirements outlined in the ASTM D638 standard. Whether you're in a materials testing lab, a plastic manufacturing facility, or a quality assurance department, our ASTM D638...

The TSF Force Measurement Test Stand is ideal for spring testing, destructive testing, product integrity testing, and other applications requiring up to 1,000 lbF (5 kN) of push or pull force. The stand features a large side mounted hand wheel requiring minimal user effort and a rigid 3” x 3” column. A removable steel...

ENC0157 Mitutoyo Cable Use to interface an RS232 9-Pin output to a 10-Pin Mitutoyo Input. Specifications Connector: 10-pin Mitutoyo Connector: 9-pin "D" RS232 Cable Length: 6 ft

The compact ES05 test stand is designed for compression testing of up to 30 lbF (150 N). Typical applications include switch contact activation testing, small spring testing, peel testing, and more. A spring-loaded lever allows for repeatable testing with up to 1.5” (38 mm) displacement. The lever mechanism can be repositioned...

This device securely holds samples for performing torque and pull tests, such as bottle cap torque testing, lid pull-off testing, and other similar tests that require vise-action. It features a threaded hole matrix that allows for customizable placement of posts to fit a wide diameter range of 0.2 - 3.5 in (5.1 - 89.0...

This cable can be used to connect a DF Series force gauge to a computer using RS232 9-Pin. This is commonly used to output test results to a quality control software. | Specifications Connector to DF Series force gauge: Hirose Connector to PC: 9-pin RS232 Cable Length: 9 ft (NC000850-1) or 20 ft (NC000850-2) Replaces...

The Eye End Adapter (A317-5818) is designed to connect grips, fixtures, and accessories to force test stands and universal testing machines (UTMs). Featuring a 1.25 in. male eye end on one side and a 5/8-18 external thread on the other, it provides a secure mechanical interface between test frames and load-bearing attachments. Eye...