All products

• Protective carrying case for ergonomic gauges and accessories.

• Available capacities of 10g, 30g, 60g, 100g,1oz, 3.5oz, 1N

• 5/8" [15.9 mm] female eye end with 8 mm pin
• #10-32M Thread

• Force capacity: 5 kN (1,000 lbF)
• Jaw sizes (mm): 30 x 50
• Jaw types: Pyramid, Rubber, V-Jaws
• Opening: 0-28 mm

• Capacity: 1 kN [225 lbF]
• Pyramid (Serrated) Roller

• Capacity: 100 lbF
• Connection: #10-32

• Force capacity: 2.5 kN (500 lbF)
• Jaw width: 1.5 in
• Opening: 0-1.5 in

• ASTM D6862 / D3330 / D903
• Capacity: 100 lbF (500 N)

• Capacity: 1000 lbF
• Max Travel: 3.5 in
• Extended Column Available

• Male-Type O, 12 mm male eye end with 6 mm pin
• #10-32M UNF thread

• Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin
• Male-Type D, 1.25 in. [31.7 mm] male eye end with 1/2 in. [12.8 mm] pin

• Capacity: 1000 lbF
• Max Travel: 4 in
• Extended Column Available

Mounting plates that are included with the test stands.

• Maximum Torque: 100 lbFin (11.3 Nm)
• Grip Opening: 0.2 - 3.50 in (5.1 - 89.0 mm)

• Measure range of motion of joints
• Electronic app connected goniometer

• Cable used in outputting travel data from a Mark-10 manual test stand travel display.

• Compatible with SLC load cells and STS torque sensors

• Connects to Kinvent Physio App to monitor the patient’s or athlete’s progress.

• Self-aligning compression plates designed to adjust to angular displacement of the material being tested. Diameters of 56 mm to 196 mm.

• Available in many sizes from 50 x 50 mm to 400 x 400 mm
• Aluminum or steel.

• Compatible with Series TT02 Torque Tool Tester

• Measure the noise level of a particular area/location or process.
• Type 2, 30 to 130 dB

• 0.1% accuracy
• Sampling Rate: 14,000 Hz
• Outputs: USB, RS-232, Mitutoyo, and analog
• Break detection
• Coefficient of Friction

• Capacity: 100 lbF
• Connection: #10-32 F

• 1", 2.5", 4" length posts

• Connects to Kinvent Physio App to monitor the patient’s or athlete’s progress.
• Surface dimensions: 21.5 x 14.5 inches / Plate

• 5/8" [15.9 mm] female eye end with 8 mm pin
• 1/2-20M Thread

• 1.25" (31.7 mm) Male Eye End
• 1"-14 Male Thread

• Generates a stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of a sound level meter.

• Used with TSA750 and TSA750H

• USB cable included with most Mark-10 force and torque gauges, and wire pull testers.

• Compatible with Series TT02 Torque Tool Tester

• Force capacity: 2.5 kN (500 lbF)
• Jaw width: 2.1 in
• Opening: 0-2 in

• For AMETEK/M&G Dead Weight Tester

Capacity: 300 lbF