All products

• Tightens and loosens Mark-10 Eye Ends.

• Force capacity: 500 lbF
• Hook threaded connection is 1/4-28M
• 1/4-28F to 5/16-18F adapter is included

• Hardwired sensor to a 3i indicator.
• USB output to the included MesurLite software.

• Light weight aluminum compression plates with threaded connections #10-32 or 5/16-18. Available in 2" or 3".

• 0.2% of FS accuracy
• Sampling rate: 30 kHz
• Outputs: USB / RS232, Mitutoyo, analog

• Capacity: 100 lbF

• Force capacity: 1 kN (200 lbF)
• Jaw sizes (mm): 30 x 30, 30 x 50, 30x80, 30x100
• Jaw types: Pyramid, Rubber, V-Jaw and Wave
• Opening: 0-30 mm

• Swivel to adjust for proper sample alignment.
• Thread sizes #10-32 or 5/16-18.

In Stock

• Pull testing of tubes, cables, and odd sample shapes
• Force capacity: 200 lbF (1 kN)
• Adjustable cam spacing: 0-0.34 in (0-8.6 mm), depending on model 
• Crosscut Rollers

• For DFGS/DGG Gauges

• Capacity: 100 lbF
• Connection: #10-32

• 0-30 lb

• Capacities: 0.5 to 1,000 lbF
• Compatible with Chatillon Test Stands: CS2+, CS2, CS

• Compatible with Kinvent physiotherapy instruments.

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 5/16-18M thread
• Mount grips that have a 5/8" eye end to most Mark-10 test stands.

• Capacities: 10 to 20,000 lbF
• Compatible with JDD Digital Display

• 5/8" [15.8 mm] male eye end with 8 mm pin
• Male-Type O, 12 mm male eye end with 6 mm pin

• Options for ESM303

• Thread adapters for sizes #10-32, #4-40, 5/16-18, M4, M6, 1/2-20, 1/4-28, 1/4-20.

• Compatible with TCD110, TCD225, TCD1100 Test Stands

• 0.2% Accuracy
• Compatible with Mark-10 load cells (R01, R02, R03, R04, R05, R06), torque sensors (R50, R51, R52, R55)

• Accuracy: .5% FS

• Force capacity: 1 kN (200 lbF)
• Jaw sizes (mm): 30 x 30
• Jaw type: Pyramid
• Opening: 0-30 mm
• Weight: 0.5 kg (1.0 lbs)

• Force capacity: 2.5 kN (500 lbF)
• Jaw sizes (mm): 30 x 30, 30 x 50, 30x80, 30x100
• Jaw types: Pyramid, Rubber, V-Jaw and Wave
• Opening: 0-10 mm

• 0-60 lb

• Force capacity: 1 kN (200 lbF)
• Jaw width: 31.8 mm (1.25 in)
• Jaw type: Pyramid
• Opening: 0-6 mm (0-0.25 in)
• Weight: 0.29 kg (0.75 lbs)

• Capacity: 30 lbF [150 N]
• Opening: 0.07 in [1.8 mm]

• Available capacities of 10g, 20g, 50g, 100g, 500g, 1000g, 1N, 5N, 10N

• Available capacities of 300g, 600g, 1000g, 2500g, 3000g, 10oz, 2lbs, 3N, 6N, 10N, 25N

• Capacity: 750 lbF
• Max travel: 6 inches
• Extended Column Available

• Discontinued, replaced by WT-205.
• Quick-action lever operation
• Wire gauge range: AWG30 – AWG3
• Force Capacity: 200 lbF (1 kN)

• Compatible with Mark-10 Series E Force Gauge

• Capacities: 100 to 10,000 lbF
• Compatible with 3i, 5i, 7i Indicators

• Capacity: 500 N [112.5 lbf]
• Connection: #10-32F thread

• Capacities: 0.5 to 10,000 lbF
• Compatible with DFS2-R-ND / DFS-R-ND Indicators

• Compatible with Chatillon Force Gauges

Capacity: 300 lbF

• Compatible with Models F755, F755S, F1505, and F1505S test frames

• Available capacities of 100 lbF, 300 lbF, 500 lbF.
• Save and recall test setups
• Multistage and basic testing
• Touchscreen or software

• Available capacities of 5kg, 10kg, 20kg, 35kg, 50kg, 10lbs, 20lbs, 40lbs, 100lbs, 50N, 100N, 200N, 500N.

• Capacities ranging from 5 lbF to 100 lbF
• 1% of FS Accuracy

• Optional base plate for Mark-10 manual test stands