All products

• Size: 2" [50 mm]
• Range: Vacuum, 0-30" Hg

• 0.5% of FS accuracy
• Sampling rate: 500 Hz
• No output

• 0.3% of FS accuracy
• Sampling Rate: 2,000 Hz
• Outputs: USB

• 0.1% of FS accuracy
• Sampling rate: 7,000 Hz
• Output: USB, RS-232, Mitutoyo, and analog

• Where used: Force gauge series DFX, DFE, DFS, DFS-R-ND,
  DFX II, DFE II, DFS2, DFS2-R- ND

• Includes: M5 Force Gauge, Double Handles, In-line Cradle with Eye Hook, Hook with Latch, Curved Padded Attachment, Charger, Carrying Case, NIST Cert

• 0.3% of FS accuracy
• Sampling rate: 1,000 Hz
• No output

• Thread adapters for sizes #10-32, #4-40, 5/16-18, M4, M6, 1/2-20, 1/4-28.

• 5/8" [15.8 mm] male eye end with 8 mm pin
• Thread sizes of #10-32M, 5/16-18M, 1/2-20M, 1/4-28M.

• Capacities: 50, 200, 1200, 2000 lbF
• Jaws: Serrated or Rubber

• Capacity: 100 lbF
• Max Travel: 9 in

• Where used: Force guage series CSD, DFI, DFIS, and DFM.

• Force capacity: 500 N (100 lbF)
• Jaw width (in): 1, 3, 5, 7
• Jaw type: Serrated
• Opening: 0-30 mm
• Weight: 0.14-0.41 kg (0.31-0.9 lbs)

• Battery for Mark-10 force gauges.

• 5/8" [15.8 mm] male eye end with 8 mm pin
• Thread sizes of #10-32F, 5/16-18F, 1/2-20M.

• Capacity: 200 lbF
• Max Travel: 13 in
• Column Extensions Available

• Includes: M3 Force Gauge, Double & Single Handles, Padded Curved Attachment, Flat Attachment, Clevis Grips, Charger, Carrying Case, NIST Cert

• One Gallon

• Capacities up to 500 lbf
• 0.25% accuracy
• 7,000 Hz sampling rate

Designed for use with Mark-10 Series F test frames.

• AC Adapters / chargers for Mark-10 force and torque gauges and indicators.

• Capacities from 500 to 20,000 lbs

• Adapter shafts for Chatillon Series DFE II, DFS II, DFE, DFS, DFIS force gauges.

• 5/8" [15.9 mm] female eye end with 8 mm pin
• Thread sizes of #10-32M, 5/16-18M, 1/2-20M.

• Capacities: 50 to 10,000 lbF
• Compatible with 3i, 5i, 7i indicators

• SPK-FMG-143 Flat Circular Fixture
• Capacity: 500 lbf
• Connection: 5/16-18

• 0.1% Accuracy
• Compatible with Mark-10 load cells (R01, R02, R03, R04, R05, R06), torque sensors (R50, R51, R52, R55)

• 0.2% of FS accuracy
• Sampling rate: 3,000 Hz
• Outputs: USB, RS-232, Mitutoyo, and analog

• Force capacity: 500 lbF
• Hook threaded connection is 1/4-28M
• 1/4-28F to 5/16-18F adapter is included

• Standards: ASTM C1161, ASTM D790
• Load Capacity: 500 lbf or 2,000 lbf options
• 10 mm diameter rollers are included

• 5/8" [15.8 mm] male eye end with 8 mm pin
• 1.25" (31.7 mm) male eye end

• Includes Hand Dynamometer, Pinch Gauge and Goniomter

• Testing manual, electric, and pneumatic torque screwdrivers, wrenches, and other tools.

• Hardwired sensor to a 3i indicator.
• USB output to the included MesurLite software.